hansgrohe 27478000 Air Plate Mountain Shower Instruction Manual

hansgrohe 27478000 Air Plate Mountain Shower

Product Information

The product is a shower system that can be wall-mounted or ceiling-mounted. It has different models, including Raindance 27471000, Raindance AIR 27474000/27476000/27468000/27492000/27493000, and Raindance 27472000, Raindance AIR 27477000/27478000/27494000. The shower system should only be used for bathing, hygiene, and body cleansing purposes. It is not recommended for use with a continuous flow water heater. The operating pressure is 1 MPa (10 bar or 147 PSI), and the hot water temperature should be controlled.

Product Usage Instructions

When installing the shower system, gloves should be worn to prevent crushing and cutting injuries. Children and adults with physical, mental, or sensoric impairments should not use the shower system without proper supervision. People under the influence of alcohol or drugs are also prohibited from using the shower system. During usage, do not allow the streams of the shower to touch sensitive body parts such as your eyes. Keep an adequate distance between the shower and your body. The arm of the shower head is only intended to hold the shower head and should not be loaded down with other objects. The cleaning of the shower system is described on pages 39 – 42 of the enclosed brochure. Spare parts are available on page 43, and a test certificate can be found on page 44. Do not use silicone containing acetic acid. Installation instructions for wall mount and ceiling mount are available on pages 36 and 38, respectively.

Safety Notes

• Gloves should be worn during installation to prevent crushing and cutting injuries.
• The shower system may only be used for bathing, hygienic and body cleansing purposes.
• Children as well as adults with physical, mental and/or sensoric impairments must not use this shower system without proper supervision. Persons under the influence of alcohol or drugs are prohibited from using this shower system.
• Do not allow the streams of the shower touch sensitive body parts (such as your eyes). An adequate distance must be kept between the shower and you.
• The arm of the shower head is intended only to hold the shower head. Do not load it down with other objects!

Installation Instructions

• The fitting must be installed, flushed and tested after the valid norms!
• Where the contractor mounts the product, he should ensure that the entire area of the wall to which the mounting plate is to be fitted, is flat (no projecting joints or tiles sticking out), that the structure of the wall is suitable for the installation of the product and has no weak points. The enclosed screws and dowels are only suitable for concrete. For another wall constructions the manufacturer’s indications of the dowel manufacturer have to be taken into account.
• The filter insert must be use to protect the shower against incoming dirt by pipework. Incoming dirt leads to defects or/and can damage parts of the shower; such caused faults voids all liability and guarantee claims.

Technical Data

• Operating pressure: max. 0,6 MPa
• Recommended operating pressure: 0,1 – 0,4 MPa (1 MPa = 10 bar = 147 PSI)
• Hot water temperature: max. 60°C

27474000 / 27492000 / 27493000 / 27477000 / 27494000:
The shower can not used together with a continuous flow water heater.

Symbol description
Do not use silicone containing acetic acid!

Dimensions

Flow diagram

Wall mount

Ceiling mount

Cleaning

Just clean: simply rub over the spray nozzles to remove lime scale.

Spare parts

Test certificate

Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet: www.hansgrohe.com

References

• Taps for bathrooms, showers and kitchens

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>