hansgrohe 38715000 AXOR Uno Shower Mixers Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
hansgrohe 38715000 AXOR Uno Shower Mixers Instruction Manual
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- The hot and cold supplies must be of equal pressures.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
Technical Data
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 80°C
Recommended hot water temp.: 65°C
Symbol description
Do not use silicone containing acetic acid! To adjust the hot water limiter on single lever mixers, please see page 33. No adjustmentis necessary when using a continuous flow water heater.
Dimensions
Flow diagram
Operation
Cleaning
Cleaning recommendations, see enclosed brochure.
Spare parts
Test certificate
| Fault | Cause | Remedy |
|---|---|---|
| Mixer stiff | – Cartridge defective, calcified | – Exchange cartridge |
| Mixer dripping | – Cartridge defective, sedimentation | – Exchange cartridge |
| Hot water temperature too low, no cold water. Instantaneous water | – Hot water | |
| limiter incorrectly set | – Set hot water limiter |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>