HitchMate 4011 CargoLoad Fold Up Carrier Instructions

HitchMate 4011 CargoLoad Fold Up Carrier

Product Information

The CargoLoad Fold-Up Carrier by HitchMate is an assembly manual product that is designed to carry cargo. It is important to note that the carrier must not be used on a towed vehicle. The maximum weight of the cargo should not exceed 500 lbs or the load limit of the hitch, whichever is the least amount. The carrier is designed to be folded when not in use, to save space.

Important Safety Information

• Make sure the area in which the Carrier is assembled is clean and well-lit. Cluttered or dark areas invite accidents.
• Keep children and bystanders away while assembling the Carrier.
• Stay alert, watch what you are doing and use common sense when using the Carrier. Do not use the Carrier while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while using the Carrier may result in serious personal injury.

General Assembly Instructions

1. Unpack all parts and identify according to the FIG. and parts list.

2. Install two bolts (item no. 13) through left frame (item no. 1), tube assembly (item no.3), and right frame (item no. 2). Install flat washers (item no. 12), and nuts (item no. 11) on the bolts.
   REMARK: DON’T TIGHTEN THEM UNTIL THE CONNECTING PLATE (Item no. 4) INSTALLATION IS FINISHED.

3. Place the two connecting plates (item no. 4) onto the frames. Install bolts (item no. 16) through frames (item no. 1 & 2), add flat washers (item no. 15). Tighten them together with the nuts (item no. 14)

4. Connecting the 2″ foldable tube (item no. 5) onto 2″ tube body assembly. (item no. 3) using bolt
   (item no. 10) and connecting pin (item no. 8).

5. NOW TIGHTEN ALL CONNECTIONS WITH A WRENCH.

Loading Your Cargo

1. MAX. WEIGHT OF CARGO NOT TO EXCEED 500 LB. OR LOAD LIMIT OF HITCH WHICHEVER IS LEAST AMOUNT.
2. Slide cargo across the frame to find the center of gravity, where the cargo will rest without rocking.
3. Cargo must be properly secured before operating the vehicle. Tie-down straps, bungee cords or cargo webbing are recommended. Heavier items demand stronger tie-downs.

Folding The Frame Body When Not In Use

1. Pull out the clip (item no. 6) and the connecting pin (item no. 8).
2. Turn the frame body up until the frame body is vertical.
3. Insert the connecting pin (item no. 8) through the 2 tube body assembly (item no. 3) and the lower hole of the 2 foldable tube (item no. 5) and insert the clip (item no. 6) into the connecting pin.

Parts List

1. 1 FRAME, LEFT 1
2. FRAME, RIGHT 1
3. ‘l’ TUBE BODY ASSEMBLY 1
4. CONNECTING PlATE 2
5. ‘2’ FOLDP/BLE TUBE 1
6. CLIP 2
7. 5/8′ HITCH PIN 1
8. CONNECTION PIN 1
9. LOCK NLIT M16 1
10. BOLTM16’00 1
11. NLIT M12 2
12. FLATWASHE: RM12 2
13. BOLTM12x75 2
14. NLIT M10 8
15. FLATWASHERM10 8
16. BOLTM10x20 8

Limited Liability, Two-Year Warranty Policy

Heininger Holdings, LLC, provides a limited two-year warranty policy for all new HitchMate products against defects in workmanship and materials from the date of purchase (at retail) provided it is purchased from an authorized HitchMate dealer. This warranty is not transferable and applies only to normal and ordinary use for which the product was intended. The warranty does not cover normal wear and tear, worn, and normal use cosmetic blemishes, improper assembly, lack of maintenance, or custom alteration/installation of any parts or accessories not originally intended or compatible with the product as sold. The warranty does not apply to damage or failure resulting from an accident, abuse or neglect.

Warranty claims are to be made directly to Heininger Holdings and must be accompanied by a sales receipt or other appropriate proof-of-purchase document. Should this product or any part or accessory be determined by Heininger Holdings, to be defective and covered by this Limited Two-Year Warranty, it will be repaired or replaced at the option of Heininger Holdings, without further charge. The cost of transportation to and from the Heininger warranty inspection facility for repair or replacement of any defective part and/or accessory and any related charges is not covered by this warranty and is to be paid by the owner.
The warranty does not cover normal wear and tear, worn and normal use cosmetic blemishes, improper assembly, lack of maintenance, or custom alteration/installation of any parts or accessories not originally intended or compatible with the product as sold. The warranty does not apply to damage or failure resulting from an accident, abuse or neglect.

This warranty is given in lieu of all other expressed warranties, and implied warranties, including without limitation implied warranties of merchandising ability and fitness for a particular purpose, and are limited to the duration and specification of this warranty. In no event shall Heininger Holdings, be liable for damages in excess of the purchase price of the HitchMate, for any loss of use, loss of time, inconvenience, commercial loss, lost profits or savings or any incidental, special, consequential, direct or indirect damages arising out of the use or inability to use such product, to the full extent as such may be disclaimed by the law. Labor charges for part changeover are not covered by this warranty.

Heininger Holdings, LLC, 2222 Queen St., Bellingham, WA 98229, Phone: 360-756-2411 Web: www.heininger.biz – Email: info@heininger.biz

References

• Heininger Holdings, LLC - To Enhance the Road Travel Experience

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>