AirExchange 600-T Zwart Air Cleaning System Instruction Manual

AirExchange 600-T Zwart Air Cleaning System

OVERVIEW

Meet the 600-T

Included items

• 1x AirExchange® 600-T Black
• 1x Power plug (country-specific)
• 1× Remote control
• 1x CM2032 Button Cell Battery
• 1x Filter set (pre-installed)
• 1x Instruction manual
• 1x Informational Door Sticker

Using the 600-T

Step 1
Remove the top foam block from the box and check if all items are included.

Step 2
Remove the AirExchange® 600-T from the packaging. IMPORTANT! Do not pull on the VORTEX blades.

Step3
Place the AirExchange® 600-T at a minimum distance of 20cm from the wall.

Step4
Make sure the power cable is not in the walking route.

Step 5
Place the plug connector of the powercable in the AirExchange® 600-T.

Step 6
Activate the system by pressin the  ON-button.

Display

Air quality indicator
During use, the air purifier automatically calculates the air quality.
This air quality (PM – Particulare Matter 2.5} is expressed in µg (micrograms)/m3 •

Light indicator
The light indicator shows the air quality which can be divided into four stages:

• Perfect: 0-25 µg/m3 (green in color)
• Normal: 25-50 µg/m3 (green in color)
• Poor : 50-75 µg/m3 (orange in color)
• Hazardous: 75> µg/m3 (red in color)

Filter replacement indicator
The air purifier is equipped with an active filter surveillance. When the filter is saturated. the system will indicate this by blinking the light indicator.

WIFI indicator
This icon lights up as soon as the WIFI connection has been successfully established. Follow chapter VII for the successfully connecting to the WIFI.

UV-C light treatment indicator
This icon lights up when the UV-C light treatment is active.

PM2.5 sensor
This icon lights up when the particle laser sensor (PM2.5) is active.

Automatic night sensor
When it gets dark or the lights inside the room are dimmed. the night sensor (in SMART mode) automatically adjusts to an energy efficient sleep mode.

Humidity indicator
The humidity sensor measures the current humidity level several times per second.

Temperature indicator
The temperature sensor measures the current temperature several times per second.

Sleep mode
This button puts the system into an energy efficient sleep mode. In this mode the system only consumes 36 Watts per hour.

Timer function and Child lock
With the timer function you can switch on the system for up to 8 hours. Press the timer button for 3 seconds to activate the child lock.

SMART-mode
With SMART mode, the system automatically measures the prevailing air conditions. Based on these  measurements. the cleaning program is determined. We recommend to use SMART-mode as standard.

Manual windspeed control
With this button you can manually determine the air speed. Ideal if you want to purify the room more quickly.

The filtering technique

• Anti-bacterial fiber mesh, sterilization fabric
  The antibacterial pre-filter consists of fiber mesh and sterilization fabric and is the first protective layer against dust. hair. pollen.

• HEPA filter with medical H14 class
  The HEPA (High Efficiency Particulate Air) H14 antimicrobial peptide filter has been developed for use within the aerospace industry and purifies fungi. bacteria. pollen. viruses. (fine)dust particles and other substances with an effectiveness of 99.995%.

• Carbon filter with activated carbon
  The Carbon filter with active carbon removes odors. gasses. smoke. oil fumes. greases and vapors. In addition. the carbon filter also purifies volatile organic compounds (TVOC). formaldehyde. benzene. xylene and other harmful substances.

• 1102 filter with natural ionization
  The self-cleaning. photocatalytic Titanium Dioxide (Ti02) mesh filter eliminates residual microorganisms such as viruses. bacteria and fungi by discharging particles.
  The AirExchange® systems do not use ESP. (Electronic) ionization which releases toxic ozone gas.

• UV-C light treatment technology
  The UV-C light treatment is an ultraviolet. electromagnetic. short-wave radiation of 253.7nm and damages the photolytic processes in the cell nuclei of microorganisms. causing them to be broken down indefinite.

Replacing the filter set

Step 1
Press the power button and pull the powerplug from the system.

Step 2
Place the AirExchange® 600-T sideways on a soft surface.

Step3
Open the filter hatch by rotating it counter-clockwise.

Step4
Carefully remove the filter set from the housing. Use diligent protective equipment for step 4. 5 and 6.

Step 5
Unplug the connection and reinstall the new filterset. Then reconnect the connection.

Step 6
Slide the new filter set into the housing. Check if it is fully centered.

Step 7
Close the filter hatch by rotating it clockwise and check if it has been closed correctly.

Steps 8
Place the AirExchange® 600-T pright and press the sleep button for 3 seconds to reset the filter.

WIFI application

Step 1
Download the TUYA Smart App via Google Play or the App Store. Create a new account and log in.

Step 2
Add a new device under ‘Small household appliance’ Then choose ‘Air Purifier’.

Step 3
Select your network and fill in the network details.
The application will now search for the WIFI network.

Step 4
Press the ‘SMART’ button for on the display 3 seconds and confirm the blinking of the WIFI icon on the display of the AirExchange® device.
The application will now establish the connection.

Step 5
When the device is succes- fully added, you can rename the device. You can now use all remote control functions of the application.

Remote control

Replaclng the battery
Simply replace the battery by opening the cover of the remote control from the bottom.
Remove the old battery from the housing and install a new CM2032 Button Cell Battery.
Close the cover and verify that the remote control works properly.

Technical specifications

Energy consumption

• Voltage: 220-240V/AC
• Frequency: 50/60Hz
• Power (Max): 85W
• Power (Stand-by): 2W
• Power (Sleep mode): 36W
• Power (SMART mode): 52W

Product specifications

• Dimensions: 806(h)*300(0)mm
• Weight: 14kg
• Sound (Max): <68 dB(A)
• Sound (Stand-by) 0 dB(A)
• Sound (Sleep mode): <17 dB(A)
• Sound (SMART mode): <21 dB(A)
• Frequency bands: 2,4-2,4835 GHz
• Max. Transmission power: 2,5 mW/4 dBm

Filter properties

• Maximum cleaning range: 100m?
• CADR (Clean Air Delivery Rate for particles: 600m/h
• CADR (Clean Air Delivery Rate) for formaldehyde: 200m₽h
• Particulate matter CCM class: P4-level
• Particulate matter Energy efficiency class: 10.9 (high efficiency)
• Formaldehyde Energy efficiency class : 3.6 (high efficiency)Sterilization rate: >99.995% (*tested for various viruses, bacteria, fungi and pollen)
• Filter type: Antibacterial pre-filter, HEPA H14 filter, Carbon filter, photocatalytic Titanium Dioxide (TI02) filter, (253.7 nm) UV-C lamp
• Sensor type: Fine dust Laser sensor, Humidity sensor,
• Temperature sensor, TVOC Odor sensor

Maintenance

You are advised to switch off the device before cleaning it. After switching it off. you can easily clean the AirExchange® by wiping it with a dry microfiber cloth. This is an anti-static cloth that does not leave any fibers on the housing or on the screen. In addition. these wipes are soft enough to not scratch the surface of the display. 

Note: do not use kitchen paper. old shirts or towels for cleaning as they leave fibers behind and can cause scratches.
For stubborn stains. we recommend moistening the microfibre cloth and gently rub the stain away. When the stain remains visible. you can use a minimum amount of liquid detergent. Then wipe the system with a dry microfiber cloth to prevent stains from the drying water.
Make sure the system is completely dry before activating it.

PAY ATIENTION! IMPORTANT!
Replacing the old filter set may release harmful particles.
Therefore. wear careful protective equipment. such as a mouth mask. safety glasses and gloves.
Then dispose of the old filter set in a plastic bag and close it carefully.

Warranty

AirExchange® offers a standard two-year manufacturer’s warranty on technical parts from the date stated on the proof of purchase.
If the product shows technical defects outside the warranty period. please contact AirExchange® via info@airexchange.nl. Subsequently. the options and possible repair costs will be discussed with you.

Warranty extension
Optionally. the manufacturer’s warranty can be extended to 5 years at an additional cost. To do this. visit the AirExchange® website via www.airexchange.nl. The warranty extension can be extended within 14 days of purchase.

Out of warranty
Defects occurring outside the warranty period and the replacement of components subject to wear and tear are not covered by the warranty.
The warranty does not cover damage caused by an external influence. improper use or incorrect use. The warranty expires when the product is repaired by a party not authorized to do so.
The replacement of the filter set. battery and the UV-Clamp are not covered by the warranty. These can optionally be purchased via www.airexchange.nl.
Furthermore. no warranty is provided on products whose labels and/or serial numbers have been torn. removed or altered.
The warranty is not transferable.

Warnings

• Moving: If you want to move the device. turn it off and unplug the powercord.

Operation

• The device should be placed at least 20cm away from obstacles. such as walls for a proper airflow.
• The powercord may break if it is bent excessively.
• Stop the air purifier immediately if there are any irregularities such as abnormal noises. strange smells. high temperatures and irregular fan rotation speeds.
• Do not sit or stand on the air purifier.
• Provide adequate ventilation when using the device in combination with a combustion appliance. This should be combined to prevent carbon monoxide poisoning.

Approvals
The AirExchange® air cleaning systems are produced in accordance with the appropriate regulations in the field of air cleaning. In addition. the AirExchange® air cleaning systems are subjected to rigorous testing by accredited inspection authorities. With this we guarantee an optimal functioning device, which complies with the highest possible safety standards.
The AirExchange® air cleaning systems carry the following Quality markings:

Disposal
The Waste Electrical and Electronic Equipment (WEEE). requires that household electrical appliances must not be disposed with normal, unsorted municipal waste stream. Users are requested to hand in the device at the local collection point for recycling or to return it to the supplier.
The cardboard packaging of this product consists of environmentally friendly material. The polystyrene packaging together with the cardboard packaging can be disposed at local recycling points.

Contact
We are proud that you have chosen our product! Do you have any further questions or would you like to get in touch with us? Then our team is happy to assist you! We are available by phone and email.

Air:xchange®
AirExchange (is powered by AirExtender B.V.)
Schielands Hoge Zeedijk 19a
2802RB,Gouda
The Netherlands
Telephone number: +31(0)182-235055
E-mail: lnfo@alrexchange.nl
Website: www.alrexchange.n

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>