sycamoreLED com SY8830AC Clyde Pendant Instruction Manual
- October 30, 2023
- sycamoreLED com
Table of Contents
sycamoreLED com SY8830AC Clyde Pendant
Product Information
The SY8830AC Clyde Pendant is a lighting fixture manufactured by SycamoreLED.com. This pendant requires the purchase of a separate E27 lamp and must be installed by a qualified electrician in accordance with the IEE wiring regulations and building regulations. The pendant should be handled with care during installation and use to prevent damage or injury. For technical support or warranty information, please visit www.sycamoreLED.com or call the dedicated technical helpline at +44 (0) 113 2866686.
Product Usage Instructions
- Before beginning any work, carefully read and retain these installation instructions for future reference.
- To prevent electrocution, switch off the power at the mains supply before installing or maintaining the pendant. Ensure others cannot restore the electrical supply without your knowledge.
- This unit must be installed by a qualified electrician in accordance with the IEE wiring regulations and building regulations.
- Install the pendant using the instructions provided in the manual. The pendant requires one E27 lamp, which must be purchased separately.
- After installation, handle the pendant with care during use to prevent damage or injury.
- If disposing of the pendant, it should be returned to the retailer to be safely disposed of in accordance with the WEEE Directive effective July 2006 – Waste from Electrical & Electronic Equipment.
For any questions or concerns regarding the usage or installation of the SY8830AC Clyde Pendant, please refer to the product manual or contact SycamoreLED.com for technical support.
Thank you for purchasing this SycamoreLED.com product. Please make sure instructions are followed carefully prior to and during installation and product is not altered, otherwise warranty may not be valid. For technical support or warranty information please visit www.sycamoreLED.com, or call our dedicated technical helpline +44 (0) 113 2866686
IMPORTANT—Please read prior to installation
- Please read these instructions carefully before commencing any work
- Please retain these instructions for future reference
- This unit must be installed by a qualified electrician in accordance with the IEE wiring regulations and building regulations
- To prevent electrocution switch the power off at the mains supply before installing or maintaining this fitting
- Ensure others cannot restore the electrical supply without your knowledge
INSTALLATION INSTRUCTIONS
CARE IN USE
- Always switch off or disconnect from the mains when cleaning the product.
- We recommend cleaning with a soft dry cloth. Do not use scourers, abrasives or chemical cleaners.
- Do not allow moisture to come into contact with electrical parts
- This luminaire should not be disposed of with normal household rubbish. When a replacement is purchased, this luminaire should be returned to the retailer to safely dispose of (WEEE Directive effective July 2006—Waste from Electrical & Elec-tronic Equipment)
SycamoreLED.com LS26 8XT