hansgrohe 27054000 Ecostat E Shower Combination Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
- hansgrohe 27054000 Ecostat E Shower Combination
- Product Information
- Safety Notes
- Installation Instructions
- Technical Data
- Symbol Description
- Dimensions
- Flow diagram
- Operation
- Cleaning
- Spare parts
- Test certificate
- Assembly
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
hansgrohe 27054000 Ecostat E Shower Combination
Product Information
This product is a shower system with different variations including Unica’C 27610000 / 27611000, Croma 100 Vario/ Unica’C Set 27653000 / 27771000, 27772000 / 27776000, 27796000, Croma 100 Multi/ Unica’C Set 27655000 / 27774000, 27775000 / 27777000, Croma 100 Multi Combi 27053000 / 27054000, 27055000 / 27056000, 27085000 / 27086000 and Croma 100 Vario Combi 27051000.
Technical Data
- Operating pressure: max. 0,6 MPa
- Recommended operating pressure: 0,1 – 0,4 MPa
- Hot water temperature:
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- Children as well as adults with physical, mental and/ or sensoric impairments must not use this shower system without proper supervision.
- Persons under the influence of alcohol or drugs are prohibited from using this shower system.
- Do not allow the streams of the shower touch sensitive body parts (such as your eyes). An adequate distance must be kept between the shower and you.
- The product may not be used as a holding handle. A separate handle must be installed.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- Shower hoses are only suitable for a connection from the shower to the fitting. Never fit a shut-off device between the fitting and the hose.
- Do not use silicone-containing acetic acid!
MODEL
Assembly Instructions
To assemble the shower system, refer to page 36 of the user manual. It is important to follow the instructions carefully to ensure proper installation. The shower hoses should only be connected from the shower to the fitting and a separate handle must be installed for holding. Do not use shut-off devices between the fitting and the hose. Gloves should be worn during installation to prevent injuries.
Usage Instructions
The shower system may only be used for bathing, hygienic and body cleansing purposes. To operate, refer to page 37 of the user manual. It is important to keep an adequate distance between the shower and sensitive body parts. Never use the product as a holding handle. For cleaning, refer to page 38 of the user manual.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- Children as well as adults with physical, mental and/or sensoric impairments must not use this shower system without proper supervision. Persons under the influence of alcohol or drugs are prohibited from using this shower system.
- Do not allow the streams of the shower touch sensitive body parts (such as your eyes). An adequate distance must be kept between the shower and you.
- The product may not be used as a holding handle. A separate handle must be installed.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- Shower hoses are only suitable for a connection from the shower to the fitting. Never fit a shut-off device between the fitting and the hose.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- Where the contractor mounts the product, he should ensure that the entire area of the wall to which the mounting plate is to be fitted, is flat (no projecting joints or tiles sticking out), that the structure of the wall is suitable for the installation of the product and has no weak points. The enclosed screws and dowels are only suitable for concrete. For another wall constructions the manufacturer’s indications of the dowel manufacturer have to be taken into account.
- The filter insert must be use to protect the shower against incoming dirt by pipework. Incoming dirt leads to defects or/and can damage parts of the shower; such caused faults voids all liability and guarantee claims.
Technical Data
- Operating pressure: max. 0,6 MPa
- Recommended operating pressure: 0,1 – 0,4 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 60°C
Symbol Description
Do not use silicone-containing acetic acid!
Dimensions
Flow diagram
Croma 100 Vario 28535000 / 28537000
Operation
Cleaning
and enclosed brochure
Spare parts
Test certificate
Assembly
Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282
· Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet :
www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>