hansgrohe 27056000 Ecostat E Shower Combination Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
hansgrohe 27056000 Ecostat E Shower Combination
Product Information
The user manual provides instructions in various languages for the installation and usage of multiple products under the brand name Unica’C and Croma 100. The products mentioned are shower systems with different models and specifications. The manual provides technical data such as the maximum operating pressure, recommended operating pressure, and hot water temperature. It also provides a flow diagram and dimensions for the products. The manual also provides safety information such as the use of gloves during installation, not allowing the shower streams to touch sensitive body parts, and not using the product as a holding handle.
Product Usage Instructions
- Ensure that gloves are worn during installation to prevent crushing and cutting injuries.
- Do not allow the streams of the shower touch sensitive body parts (such as your eyes). An adequate distance must be kept between the shower and you.
- The product may not be used as a holding handle. A separate handle must be installed.
- The shower system may only be used for bathing, hygienic, and body cleansing purposes.
- Shower hoses are only suitable for a connection from the shower to the fitting. Never fit a shut-off device between the fitting and the hose.
- Follow the assembly instructions provided on page 36 of the manual to install the product.
- Refer to page 37 for operation instructions and page 38 for cleaning instructions.
- Refer to page 39 for spare parts information and page 40 for the test certificate.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- Children as well as adults with physical, mental and/ or sensoric impairments must not use this shower system without proper supervision. Persons under the influence of alcohol or drugs are prohibited from using this shower system.
- Do not allow the streams of the shower touch sensitive body parts (such as your eyes). An adequate distance must be kept between the showerand you.
- The product may not be used as a holding handle. A separate handle must be installed.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- Shower hoses are only suitable for a connection from the shower to the fitting. Never fit a shut-off device between the fitting and the hose.
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms.
- Where the contractor mounts the product, he should ensure that the entire area of the wall to which the mounting plate is to be fitted, is flat (no projecting joints or tiles sticking out), that the structure of the wall is suitable for the installation of the product and has no weak points. The enclosed screws and dowels are only suitable for concrete. For another wall constructions the manufacturer’s indications of the dowel manufacturer have to be taken into account.
- The filter insert must be use to protect the shower against incoming dirt by pipework. Incoming dirt leads to defects or/and can damage parts of the shower; such caused faults voids all liability and guarantee claims.
Assembly
Technical Data
- Operating pressure: max. 0,6 MPa
- Recommended operating pressure: 0,1 – 0,4 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 60°C
Symbol Description
Do not use silicone-containing acetic acid!
Dimensions
Flow diagram
Operation
Cleaning
Spare parts
Test certificate
Hansgrohe · Postfach 1145 · D-77761 Schiltach
Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com
Internet: www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>