Sekonic L-398A STUDIO DELUXE III Analog Light Meter User Manual
- October 30, 2023
- SEKONIC
Table of Contents
Sekonic L-398A STUDIO DELUXE III Analog Light Meter User Manual
Set ISO
Turn inner dial until desired ISO appears next to ISO mark in window.
Measure
Press MEASURE button. Meter needle will move on foot candle scale. Release.
Needle will stop in position over foot candle scale.
Turn DIAL RING so that same value from foot candle scale aligns with SCALE MARK (black triangle). Read f-stop/shutter speed combinations from outer ring of dial and set camera accordingly.
NOTE: If needle moves past far right of scale, insert HIGH SLIDE into top of meter, and set foot candle value on dial by “H” MARK.
Compare Readings
Take measurement and rotate MEMORY POINTER to rest over needle. Take second
reading and compare.
Constant Reading
While pressing MEASURE button, turn button clockwise until MEASURE BUTTON LOCK
MARK is at 3:00 position. Turn counter-clockwise to unlock.
EV
After following measure directions above, refer to EV window for EV value of
reading.
CINE speeds
After following measure directions above, refer to CINE scale above shutter
speeds.
1.888.610.7664
1.888.610.7664
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>