VIND 50068-010 Stala Wall Lamp Instruction Manual
- October 30, 2023
- VIND
Table of Contents
VIND 50068-010 Stala Wall Lamp
Product Information:
- Product Name: Stala – Wall Lamp
- Product Number: 50068-010
- Article Number: 50068-010
- Power Source: 220-240V 50/60Hz
- Maximum Wattage: E27 Max. 25W
- Batch Number: 2516_2523
- Brand: VIND Collection
- Website: www.vindcollection.se
Product Usage Instructions
- Unpack the contents of the package and ensure all parts are included.
- Refer to the assembly instructions provided in the manual.
- Do not tighten screws until all screws have been assembled.
- Be careful when assembling, if screws are tightened too hard (or by screwdriver), damages in the tabletop may appear.
- Tighten the screws after some time of using the product.
If you encounter any difficulties or have questions regarding the assembly of your Stala – Wall Lamp, please refer to the contact information provided on the VIND Collection website.
Assembly Instruction
Congratulations on your new furniture from VIND Collection!
Caution
- This product is made for indoor use only
- As the temperature of the lamp body and bulb is high after the light is turned on, do not let children touch the lamp. Electrical components and bulbs are only to be handled by adults.
- Clean the product with a soft cloth. Do not use water! The Product should not come in touch with fluids, gas, humidity or casutic materials.
- Do not cover the luminaire with any objects.
- Only rated voltage and frequence should be used with this product.
- Check the powercable carefully, do not connect the product if any damages can be found iin the cable.
- Only the manufacturer, their service agent or other qualified person may repair and or replace damaged parts.
- Installation must be made with the correct screws and screwcups. These parts are not included with this product as different materials demand different standards.
Congratulations on your new piece of furniture from the VIND Collection!
We hope you enjoy your new piece of furniture!
In order for you to get as many years as possible out of the product, there
are some tips and tricks to maintain it in the best way.
USING INSTRUCTIONS
Furniture with MDF board / painted furniture
Be careful of chafing! As the board is painted/lacquered, it is easy for the surface to become bumpy, so be careful with sharp/hard parts against these parts. Scratches in a painted board can easily occur, so be careful when using place mats / tablecloths on tables that are painted. Our furniture is hand painted and therefore color variations can occur and it is very difficult to get the surface exactly right. There is, therefore, no complaint if the product has small shifts/unevennesses in the colour.
Fabric/imitation leather
Wipe off with a slightly damp cloth if stains occur. Even this material can be sensitive to sharp objects, be careful of scratches. Metal parts These can also be sensitive to shocks/impacts and should be handled carefully to avoid damage to the surface layer.
Marble
Is a porous stone with natural color changes and different hardness over the surface. The stone is particularly sensitive to acidic liquids, which is why common cleaning agents can damage the surface. To protect the surface, it should be treated with agents specially intended for marble. Alternatively green soap. Mounting
Be careful when assembling the products. If the screws are tightened too tightly (or with a screwdriver), damage to the table top may occur. Retighten the screws after a period of use. During assembly, all screws must be tightened to 20% before they are then cross-tightened until they are fully tightened.
Do you have questions about your new piece of furniture, contact your DEALER. You can find more care advice at www.vindcollection.se
ATTENTION!
Please be careful when assembling, if screws are tightened too hard (or by
screw driver), damage in the table top may appear. Tighten the screws after
some time
Do not tighten screws until all screws have been assembled!
www.vindcollection.se
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>