Octane FITNESS OCTANE4700 PRO 4700 Elliptical Instruction Manual
- October 30, 2023
- Octane FITNESS
Table of Contents
Octane FITNESS OCTANE4700 PRO 4700 Elliptical
WHAT’S INCLUDE
Base Box
Console Box
Base Hardware
FEATURES
- Stride length 18″-26″
- Electronic stride adjustment (1/2″ increments)
- QuadLink Drive
- Pedal spacing 1.8″
- Low step-up height
- Oversized pedals
- Soft grip pedal
- Covered track and rollers
- Converging path handlebars
- MultiGrip handlebars
- Fingertip controls on moving handlebars
- Moving handlebar lock-out
- One-time adjustable handlebar position
- LCD TV mount option
- Stationary handlebars
- Water bottle holder/MP3 holder
- Reading rack
- Transport wheels
- Digital contact heart rate on moving handlebars
- Wireless heart rate ready
- Console fan
- On-the-fly programming
- Quick Start
- Cool down
- HeartLogic Intelligence
- Resistance levels – 30
- Number of Workout Programs – 19
- Preset resistance programs – Manual, Random, Interval, Custom Interval, Hill, 10K
- Heart rate-controlled programs – Fat Burn, Cardio, Heart Rate Interval, Heart Rate Custom Interval, Heart Rate Hill, Heart Rate Speed Interval
- Advanced programs – New Leaf® Custom, Constant Watts, Constant METs, 30:30 interval
- Stride length programs – Starter, 10K, PowerWalk, Stride Interval, Dual Direction
- Workout Boosters – SmartStride, X-Mode, GluteKicker, ArmBlaster
- Power Requirements: Self Powered, Cordless. It uses an Alternator and Battery for Power
- California Residents see Prop 65 WARNINGS
INSTALLATION INSTRUCTION
Pedal Lever
- Remove bolt from 3-pivot link.
- Attach pedal lever; tighten to 30 ft-lb.
Moving Handlebars
- Attach handlebar to rocker arm with B-1 (Qty 2), B-4 (Qty 2), B-5 (Qty 2); tighten (30-35 ft-lb). Place handlebar cover.
- Connect heart rate and control button cables.
Mast, Keypad, Console & Access Panel
- Slide mast over screws on base; tighten.
- Connect cable connectors: front of mast (Qty 1) back of mast (Qty 3) and battery cable (Qty 1).
- Remove console back cover.
- Route and connect keypad cables per diagram on keypad. Attach ground wires; attach keypad to mast with C-2 (Qty 4).
- Attach console and arcs to mast with C-1 (Qty4). Match cable connectors to sockets on console back; connect. Attach console back cover.
- Loosen side screws; position access panel with metal plate behind back shroud and front tabs in slots; tighten side screws.
- Secure back of panel with B-2 (Qty2).
Adjust Moving Handlebars (optional)
Adjust moving handlebars for 1.5″ longer or shorter reach:
- Hold handlebar; remove nut and reposition link. (Hole closest to user provides shortest reach.)
- Replace nut; tighten (17 ft-lb).
Handlebars must be set to same position for proper functioning.
Top Shroud & Mast Boot
- Hold top edge of shroud, press bottom edge into place.
- Attach top shroud with B-3 (Qty 2).
- Wrap mast boot around mast; tuck into access panel.
Level & User Set-up
- Adjust and lock levelers; make sure nut is tight.
- Complete User Set-up (press and hold ,1;,./…,,)See Operations Manual for instructions.
- Optional: Connect CSAFE and/or video.
TECH SPECS
- Max User Weight: 400 lbs
- Weight: 340 lbs
- Footprint: 31″ x 71″
- Dimensions (Live Area): 83″ L x 31″ W x 71″ H
WARRANTY
10 Years Parts, 1 Year Labor (Commercial).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>