SILONE TC001 Tag User Manual

October 30, 2023
SILONE

LINES IN RED – DO NOT PRINT
THEY REPRESENT FOLDS AND SAFE LINES
TagSILONE TC001 TagSILONE TC001 Tag - ICON 1

TC001 Tag

SILONE TC001 Tag 2SILONE TC001 Tag 3

Product name: Silone Tag
Model: TC001

Tag appearance overview:

SILONE TC001 Tag - overview

Product Function:

  1. Network location
    When the Silone Tag is beyond the Bluetooth distance from the iPhone®, the Silone Tag can not be connected in the Find My® app. You can select: Lost mode, then select: Enable, enter your contact number, etc. If the Silone Tag is disconnected from your iPhone for more than a period of time, and there is another iPhone near the Silone Tag, you will receive a notification and the latest location in the Find My app.

  2. Play the sound
    When the iPhone and Silone Tag are within the Bluetooth range of about 20 meters, click to play sound in the Search app, and Silone Tag will beep to help you find nearby items quickly.

Instructions:

  1. Turn on the Silone Tag
    • The battery insulation film should be removed before the first pairing connection.
    • The pairing connection can be performed after hearing the beep sound.

  2. Pair Silone Tag
    • Open the Find My app on your iPhone.
    • Hold the Silone Tag near your iPhone, tap the Items tab, select Add New Item, and tap Other Supported Item.
    • Select the Tag with the word Silone and tap “Connect.”
    • Fill in a ” Customized Name” to name your Tag and choose an emoji.
    • Agree to register Silone Tag with your Apple® ID.
    • Tap “Done” to bind successfully.

  3. Remove Silone Tag from your device
    • Place the Silone Tag with the phone and make sure the device can search for the Silone Tag.
    • Open the Find My app on your iPhone, tap “Items” at the bottom of the screen, and then tap the name of the item.
    • Find “Remove Item” at the bottom of the list and tap “Remove” to finish.
    Note: After deleting Silone Tag, Silone Tag will emit a prompt tone.
    At this time, Silone Tag will not shut down, and it can be re-paired with app when it needs to be used again.

  4. Replace the battery
    • Pry the housing from the notched position on the side of the device.
    • Take out the old battery and replace the newly purchased CR2032 battery (volTage :3V; capacity :175mAh) into the Silone Tag.
    The positive pole (+) must face up. If a prompt tone is heard, the battery is correctly installed.
    • Reinstall the device with the notch in the shell in the direction of the lanyard.
    • The notch of the shell should be aligned with the direction of the lanyard.SILONE TC001 Tag - lanyard

  5. Malicious tracking alert
    When an unknown Tag accompanies your belongings for more than a period of time, you will receive the following alerts:
    • If your iPhone, iPad®  and other devices have iOS® version 14.5 or later, you will be alerted on your iPhone.
    • If an unknown Tag moves with you for a while, it will beep to alert you to its location. If someone happens to be carrying a Tag (Such as when traveling on a vehicle), there is no need to worry. As long as the Tag does not leave the owner’s side, it will not trigger the alarm.

  6. Privacy protection
    • Where your Silone Tag is, only you can see. Your location data and history are never stored in Silone Tag, Apple, or Silone’s servers. The device that passes your Silone Tag location data is also always anonymous, and the location data is encrypted at every step of the lookup. Therefore, neither Apple nor Silone knows the location of your device, nor can they help you find the specific identity of the device, nor can you know which devices sent your Silone Tag location information.

Security Information:

Before using and operating the device, please read and follow the following precautions to ensure the best performance of the device and avoid dangerous or illegal situations.

  • Please use the device in the temperature range of -20ºC ~ +60 . When the ambient temperature is too high or too low, it may cause device failure, fire or explosion.
  • The radio waves generated by the device may affect the normal operation of some medical equipment (such as cochlear implants, hearing aids, etc.). It is necessary to keep a safe distance of no less than 20cm when using the device, or consult the manufacturer of the medical equipment for restrictions on the use of the device.
  • Tested under specific laboratory conditions, the equipment can resist splashing, water and dust, and its effect can reach the IP67 level of ISO IEC 60529: 2013 standard. The above protection performance will decrease with the wear and tear of daily use.
  • Do not disassemble or modify the equipment without authorization. Otherwise, the equipment will not be within the scope of our warranty.
  • It is strictly forbidden to heat, drop, impact, squeeze, puncture, and short connect the positive and negative batteries. The above behaviors will lead to short circuit and overheating of the battery, causing battery leakage, fire or explosion and other physical injuries.
  • If the battery leaks, do not expose skin or eyes to the leaking fluid.If contact with skin or eyes, please rinse immediately with water and go to the hospital for medical treatment.
  • Please dispose batteries according to local regulations. Do not dispose batteries as household waste. Improper disposal of batteries may lead to battery explosion.
  • Do not throw the battery into the fire, microwave oven or high pressure container to avoid explosion.
  • Do not allow children or pets to swallow the battery to avoid injury or battery explosion.

Attention:

  • Without permission, you shall not change, expand the transmission frequency range, increase the transmission power, change the original design characteristics and functions of the RF antenna and the product without authorization. Otherwise, it will affect your right to use the equipment or bear relevant legal liabilities.
  • The use of the product shall not affect aviation safety and cause harmful interference to other legitimate radio stations, weather radar stations, observatories, etc. Once the impact and interference are found, the use shall be stopped immediately and measures shall be taken to eliminate the interference before continuing to use.

If any questions, please feel free to contact us!
Silone, Inc.
4512 Enterprise Street
Fremont, CA 94538
Tel: +1 408 441 8858
www.silone.com

The Apple Find My network provides an easy, secure way to locate compatible personal items using the Find My app on your iPhone, iPad, Mac®, or the Find Items app on Apple Watch®.
To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS®, or macOS® is recommended. The Find Items app on Apple Watch requires the latest version of watchOS®.
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and’ (2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to cornply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designedto provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communiations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the folowing measures:,:

  • Reorient or relocate the receiving artenna.«’
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consuk the dealer or an experienced radio/TV technician for help.ct.

The device has been evaluatedto meet general RF exposure requirement.
The Apple® Find My® network provides an easy, secure way to locate compatible personal items using the Find My app on your iPhone®, iPad®, Mac®, or the Find Items app on Apple Watch®.
To use the Apple Find My app to locate this item, the latest version of iOS®, iPadOS®, or macOS® is recommended. The Find Items app on Apple Watch requires the latest version of watchOS®.
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
Designed in California, Made in China.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals