Electrolux ESA47300UW Dishwasher User Manual
- October 30, 2023
- Electrolux
Table of Contents
ESA47300UW Dishwasher
Product Information: ESA47300UW EN Dishwasher
Thank you for purchasing an Electrolux dishwasher. This product has been designed with decades of professional experience and innovation to provide great results every time you use it. Please read the user manual carefully before installation and use of the appliance. Always keep the instructions in a safe and accessible location for future reference.
The dishwasher has a control panel with an on/off button, program button, delay button, option button, and start button. The program indicators, display, and indicators provide information about the washing, rinsing, and drying phases. The dishwasher has a salt container, rinse aid dispenser, filters, cutlery basket, lower basket, upper basket, upper spray arm, lower spray arm, and air vent. The rating plate contains information about the model, PNC, and serial number.
Usage Instructions
- Installation: Only a qualified person should install the dishwasher. Follow the supplied instructions carefully to avoid any injuries or damage that may result from incorrect installation or usage.
- Electrical Connection: The dishwasher presents a risk of fire and electric shock. Always follow the electrical connection instructions carefully.
- Water Connection: The dishwasher presents a danger of high voltage. Always follow the water connection instructions carefully.
- Use: Load the dishwasher according to the instructions provided in the user manual. Use the program button to select a program and the option button to select additional options. Press the start button to start the selected program.
- Service: Always use original spare parts. When contacting our authorized service center, ensure that you have the model, PNC, and serial number available. The information can be found on the rating plate.
- Disposal: The dishwasher presents a risk of injury or suffocation. Follow the instructions provided in the user manual for disposal. Ensure that it is not accessible to children and pets to avoid any accidents.
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious
and stylish, it has been designed with you in mind. So whenever you use it,
you can be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website to:
****Get usage advice, brochures, trouble shooter, service and repair
information:www.electrolux.com/support
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
- Warning / Caution-Safety information General information and tips Environmental information
Subject to change without notice.
SAFETY INFORMATION AND INSTALLATION
WARNING
Refer to the separate Installation Instructions booklet for Safety
Information and Installation. Read carefully the Safety chapters before any
use or maintenance of the appliance.
PRODUCT DESCRIPTION
Control panel overview
DAILY USE
Using the hood
Check the recommended speed according to the table below.
It is recommended to leave the hood operating for approximately 15 minutes after cooking.
To operate the hood:
- Press the first speed button on switch on the appliance.
- If needed, press the light button to illuminate the cooking surface.
- If needed, change the speed by pressing the desired button.
To turn off the appliance press the first speed 0|1 button again.
Hob²Hood function
It is an automatic function which connects the hob with a hood. Both the hob
and the hood have an infrared signal communicator. Speed of the fan is defined
automatically on basis of mode setting and temperature of the hottest cookware
on the hob. You can also operate the fan using the hob manually. The function
can be activated from panel of the hob.
For more information how to use the function refer to the hob user manual.
Filter notification
Filter alarm reminds to change or clean the charcoal filter and clean the
grease filter. The filter indicator is turned on for 30 seconds if the grease
filter must be cleaned. The filter indicator flashes for 30 seconds if the
charcoal filter must be replaced or cleaned.
Refer to cleaning the grease filter in care and cleaning chapter.
Refer to cleaning the charcoal filter or replacing the charcoal filter in care and cleaning chapter.
To reset the function press the button 3 for 3 seconds.
To activate or deactivate function:
-
To activate function press the button 2 for 3 seconds.
If the function is activated, the indicator 2 flashes two times. -
To deactivate function press the button 2 for 3 seconds.
If the function is deactivated, the indicator 2 flashes ones.
Remote-control
The appliance is supplied with a remote-control.
The connection is originally enabled.
To connect or disconnect remote-control:
- Switch off the appliance.
- Press the for 3 seconds.
The indicator on control panel flashes twice if function is enabled and once if disabled.
CARE AND CLEANING
Notes on cleaning
Cleaning the grease filter
Filters are mounted with the use of clips and pins on the opposite side.
To clean the filter:
-
Press the handle of the mounting clip on the filter panel underneath the hood (1).
-
Slightly tilt the front of the filter downwards (2), then pull.
Repeat the first two steps for all filters. -
Clean the filters using a sponge with non abrasive detergents or in a dishwasher.
The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolor, it has no influence on the performance of the appliance. -
4. To mount the filters back follow the first two steps in reverse order. Repeat the steps for all filters if applicable.
Replacing the charcoal filter
WARNING!
The charcoal filter is non-washable!
To replace the filter:
-
Remove the grease filters from the appliance.
Refer to “Cleaning the grease filter” in this chapter. -
Press the front edge in slot towards the bottom part of the filter. Slightly tilt the front of the filter downwards.
-
To install a new filter, perform the same steps in reverse order.
In any case, it is necessary to replace the filters at least every four months.
Replacing the lamp
This appliance is supplied with a LED lamp and separate control gear (LED
driver). These parts can be replaced by a technician only. In case of any
malfunction refer to “Service” in the “Safety Instructions” chapter.
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the packaging in relevant
containers to recycle it. Help protect the environment and human health by
recycling waste of electrical and electronic appliances. Do not dispose of
appliances marked with the symbol with the household waste. Return the product
to your local recycling facility or contact your municipal office.
References
- Electrolux
- Electrolux
- Electrolux
- Register Your Appliance – Product Registration – Electrolux
- APPLiA Europe | The new Energy Label | Belgium
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>