Conceptronic CHVIDEOCR Home Video Creator Quick Installation Guide

Conceptronic CHVIDEOCR Home Video Creator

Congratulations on the purchase of your Conceptronic Home Video Creator.
The enclosed Hardware Installation Guide gives you a step-by-step explanation of how to install the Conceptronic Home Video Creator. When problems occur, we advise you to go to our support site (go to www.conceptronic.net and click ‘Support’. Here you will find the Frequently Asked Questions Database. When you have other questions about your product and you cannot find it at our website, then contact us by e-mail: [email protected]
For more information about Conceptronic products, please visit the Conceptronic Web Site: www.conceptronic.net. The Software installation as described below, may be slightly different from the installation on your computer. This depends on the Windows version you are using.

Introduction

The Conceptronic Home Video Creator is the best hardware for recording analog videotapes through the High-Speed USB 2.0 port to your PC. Together with the software we deliver with the hardware you can connect any Camcorder, or VCR to your Computer. VHS, Hi-8, D8, and DV videos can be captured on your computer. When your project is complete you can burn it to DVD or CD.

Due to its small size (81mm x 30mm x 15mm (L x W x H)), it is easy to take the Conceptronic Home Video Creator with you. Together with the High-Speed USB 2.0 interface Video and Sound Data has the best performance. Encoding is possible in MPEG 1, MPEG 2, and MPEG 4 which are ideal formats for video applications. Motion capture is possible with 720×576(PAL) at 25 fps and 720×480(NTSC) at 30 fps. Our Conceptronic Home Video Creator does not need batteries but is using power from the USB port.

Minimum System Requirements

• Pentium 4 1Ghz or higher;
• Microsoft Windows 2000, XP, or Vista
• 256MB RAM
• SoundCard

Package Content

• Conceptronic Home Video Creator
• Audio/Video (Composite) to SCART Cable
• Software and Driver CD-ROM
• Presto! Video works Editing Software CD-ROM
• User’s manual

Hardware Device Description

Description:

1. USB 2.0 Connector.
2. S-Video Input (input data from external A/V Device, e.g. Videorecorder or Video Camera.
3. Composite Video Input (input data from external A/V device, e.g. Videorecorder or Video Camera.
4. Audio L/R Input, Audio input from the external audio source.
Note: The Audio L/R Input is only available under Windows XP & Vista. If you use Windows 2000 please connect the audio source into your SoundCard Line In.

Driver Installation

Note: First install the software, before you connect the CHVIDEOCR to the computer!

• A. Insert the Product CD-ROM into your CD-ROM drive. The Autorun Menu should appear automatically. If the Menu does not appear, use Windows Explorer to navigate to the CD-ROM and execute “Autorun.exe”.
  

• B. Select the option “Install Drivers” in the Autorun Menu.

• C. The Driver Setup Wizard will appear. Click “Next” to continue.

• D. The driver will be installed on your computer. Wait for the completion of the installation and click “Finish” to close the installer.

• E. Select the option “Yes, I want to restart my computer now” and click “Finish” to complete the installation.

Hardware Installation

After the driver installation, you can connect the Home Video Creator. Connect the CHVIDEOCR to a free USB port on your computer. The device will be recognized and installed automatically.

Software Installation

• A. Select the option “Install Software” in the Autorun Menu.
  

• B. The Setup Wizard will be started. Select your Language and click “SET” to continue.

• C. Change the installation destination with the “Browse” button, or keep it default. Click “Next” to continue. The software will be installed.
  Note: When your computer is running on Windows 2000 or Windows XP, the wizard will automatically start the setup of “Windows Media Format 9” and “Windows Media Tools”. Without these 2 applications, the CHVIDEOCR will not function in Windows 2000 and Windows XP. Follow the onscreen instructions to install these 2 applications.

• D. Please wait for the completion of the installation and click “Finish” to close the Setup Wizard.

• E. Select the option “Yes, I want to restart my computer now” and click “Finish” to complete the installation.

Capture using the CHVIDEOCR Application

With the following steps, you can start a quick record with the CHVIDEOCR Capture Application.

• A. Connect your capture device to the Home Video Creator.

• B. Start the software with the icon on your Desktop.

• C. Use the options button to change the settings. By default, all movies are stored on your first partition.

• D. Select the correct input (Composite / S-Video).

• E. Press the „Record” Button and press „Play” on your capture device.
  

• F. When the capture is finished, press the „Stop” Button.

• G. You will be asked to save the file with another name. Change the filename or press „OK” to continue with the default name.
  The movie is now captured on your computer.

Capture using the Presto! Digital Converter Application

With the following steps, you can start a quick record with the Presto! Digital Converter Application.

• A. Connect your capture device to the Home Video Creator.

• B. Install the Presto! Digital Converter Application from the delivered Presto! CD-ROM.

• C. Start the software with the icon on your Desktop.

• D. Select the Left Button for direct recording to DVD (entire disc), select the Right Button for direct recording to DVD with preview and pause options.

• E. You can change the record settings with the „Options” button.
  

• F. Change the Video Source to the used input (Composite / S-Video) and select your video Quality.

• G. If needed, you can change the temporary folder, or press „OK” to continue.

• H. Press the „Record” Button and press „Play” on your capture device.
  

• I. When the capture is finished, press the „Stop” Button.

• J. The DVD Recorder will finish the recording and notify you about the completed burning. Press „OK” to finish.
  The movie is now captured on your DVD.

FAQ’s

What is the Conceptronic CHVIDEOCR Home Video Creator?

The Conceptronic CHVIDEOCR Home Video Creator is a device that allows you to capture and digitize analog video signals, such as VHS tapes or camcorder recordings, and convert them into digital formats.

What video formats does the CHVIDEOCR Home Video Creator support?

The CHVIDEOCR Home Video Creator supports various video formats, including MPEG-1, MPEG-2, and MPEG-4.

How do I connect my analog video source to the CHVIDEOCR Home Video Creator?

You can connect your analog video source, such as a VCR or camcorder, to the CHVIDEOCR Home Video Creator using composite or S-Video cables.

Does the CHVIDEOCR Home Video Creator require any additional software to operate?

Yes, the CHVIDEOCR Home Video Creator comes with software that you need to install on your computer to capture and edit the digitized videos.

Can I edit the videos I capture with the CHVIDEOCR Home Video Creator?

Yes, the included software allows you to edit the videos you capture, such as trimming, adding transitions, or applying effects.

What output options are available for the digitized videos?

The CHVIDEOCR Home Video Creator supports various output options, including saving the videos to your computer's hard drive, burning them to DVD, or uploading them to online platforms.

Does the CHVIDEOCR Home Video Creator support audio capture?

Yes, the CHVIDEOCR Home Video Creator supports audio capture along with the video, allowing you to digitize the complete audiovisual content.

Can I connect multiple analog video sources to the CHVIDEOCR Home Video Creator simultaneously?

No, the CHVIDEOCR Home Video Creator allows you to connect and capture video from one analog source at a time.

What are the system requirements for using the CHVIDEOCR Home Video Creator?

The system requirements may vary depending on the specific software version, but typically, you will need a Windows or Mac computer with a USB port and sufficient processing power and memory.

Can I capture videos in high-definition (HD) with the CHVIDEOCR Home Video Creator?

No, the CHVIDEOCR Home Video Creator is designed for capturing and digitizing analog videos, which are typically in standard definition (SD) formats.

Is the CHVIDEOCR Home Video Creator compatible with both Windows and Mac operating systems?

Yes, the CHVIDEOCR Home Video Creator is compatible with both Windows and Mac operating systems, as long as you meet the minimum system requirements.

Are there any additional features or functionalities of the CHVIDEOCR Home Video Creator?

The CHVIDEOCR Home Video Creator primarily focuses on capturing and digitizing analog videos, but the included software may have additional features like basic video editing, DVD authoring, or sharing options.

Download The PDF Link:Conceptronic CHVIDEOCR Home Video Creator Quick Installation Guide

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>