Electrolux LXB3AF82R Refrigerator User Manual
- October 30, 2023
- Electrolux
Table of Contents
- LXB3AF82R Refrigerator
- Product Information
- Product Usage Instructions
- Safety Instructions
- Installation
- SAFETY INFORMATION
- SAFETY INSTRUCTIONS
- INSTALLATION
- DAILY USE
- HINTS AND TIPS
- CARE AND CLEANING
- TROUBLESHOOTING
- TECHNICAL DATA
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LXB3AF82R Refrigerator
Product Information
The Electrolux appliance is a refrigerator containing isobutane, a flammable gas with a high level of environmental compatibility. The product has been designed to provide great results every time and has been built with decades of professional experience and innovation. The product comes with a user manual that provides safety information, installation instructions, and usage advice.
Product Usage Instructions
Safety Information
Before installing and using the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that result from misuse of the appliance.
Safety Instructions
Installation
Only a qualified person must install this appliance.
Electrical Connection
When positioning the appliance, ensure that the supply cord is not trapped
or damaged. Do not use multi-plug adapters and extension cables to avoid the
risk of fire and electric shock.
Use|
The appliance contains flammable gas, isobutane (R600a). Be careful not to
cause damage to the refrigerant circuit containing isobutane. This will avoid
the risk of injury, burns, electric shock, or fire.
Internal Lighting
The internal lighting is intended to show the status of the appliance and
is not suitable for household room illumination. Be careful when handling the
lighting to avoid the risk of electric shock.
Care and Cleaning
When cleaning the appliance, be careful to avoid injury or damage to the
appliance.
Service
If you need service for your appliance, contact the authorized service center.
Always use original spare parts when repairing your appliance.
Installation
Dimensions
The dimensions of the appliance are as follows:
- Height: 820 mm (H1) and 820 mm (H2)
- Width: 596 mm (W1), 596 mm (W2), and 777 mm (W3)
- Depth: 547 mm (D1), 550 mm (D2), and 1120 mm (D3)
Location
To ensure the best functionality of the appliance, do not install it near a
heat source such as an oven, stove, radiator, cooker, or hob. Also, avoid
placing it in direct sunlight. Make sure that air can circulate freely around
the back of the cabinet. The appliance should be installed in a dry, well-
ventilated indoor position within the specified temperature range. If you have
any doubts about where to install the appliance, contact the vendor, customer
service, or the nearest authorized service center.
WE’RE THINKING OF YOU
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler – features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website to:
****Get usage advice, brochures, trouble shooter, service and repair
information:www.electrolux.com/support
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
- Warning / Caution-Safety information General information and tips Environmental information
Subject to change without notice.
SAFETY INFORMATION
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
Children and vulnerable people safety
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children aged from 3 to 8 years are allowed to load and unload the appliance provided that they have been properly instructed.
- This appliance may be used by persons with very extensive and complex disabilities provided that they have been properly instructed.
- Children of less than 3 years of age should be kept away from the appliance unless continuously supervised.
- Children should be supervised to ensure that they do not play with the appliance.
- Children shall not carry out cleaning and user maintenance of the appliance without supervision.
- Keep all packaging away from children and dispose of it appropriately.
General Safety
- This appliance is for storing food and beverages only.
- This appliance is designed for single household domestic use in an indoor environment.
- This appliance may be used in, offices, hotel guest rooms, bed & breakfast guest rooms, farm guest houses and other similar accommodation where such use does not exceed (average) domestic usage levels.
- To avoid contamination of food respect the following instructions:
- do not open the door for long periods;
- clean regularly surfaces that can come in contact with food and accessible drainage systems;
- store raw meat and fish in suitable containers in the refrigerator, so that it is not in contact with or drip onto other food.
- WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- WARNING: Do not damage the refrigerant circuit.
- WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
- Do not use water spray and steam to clean the appliance.
- Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.
- When the appliance is empty for long period, switch it off, defrost, clean, dry and leave the door open to prevent mould from developing within the appliance.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard.
SAFETY INSTRUCTIONS
Installation
WARNING!
Only a qualified person must install this appliance.
- Remove all the packaging.
- Do not install or use a damaged appliance.
- Follow the installation instructions supplied with the appliance.
- Always take care when moving the appliance as it is heavy. Always use safety gloves and enclosed footwear.
- Make sure the air can circulate around the appliance.
- At first installation or after reversing the door wait at least 4 hours before connecting the appliance to the power supply. This is to allow the oil to flow back in the compressor.
- Before carrying out any operations on the appliance (e.g. reversing the door), remove the plug from the power socket.
- Do not install the appliance close to radiators or cookers, ovens, or hobs, unless otherwise specified in the installation instructions.
- Do not expose the appliance to the rain.
- Do not install the appliance where there is direct sunlight.
- Do not install this appliance in areas that are too humid or too cold. When you move the appliance, lift it by the front edge to avoid scratching the floor.
- The appliance contains a bag of desiccant. This is not a toy. This is not food. Please dispose of it immediately.
Electrical connection
-
WARNING!
Risk of fire and electric shock. -
WARNING!
When positioning the appliance, ensure the supply cord is not trapped or damaged. -
WARNING!
Do not use multi-plug adapters and extension cables. -
The appliance must be earthed.
-
Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply.
-
Always use a correctly installed shockproof socket.
-
Make sure not to cause damage to the electrical components (e.g. mains plug, mains cable, compressor). Contact the Authorised Service Centre or an electrician to change the electrical components.
-
The mains cable must stay below the level of the mains plug.
-
Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
-
Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
Use
WARNING!
Risk of injury, burns, electric shock or fire.
The appliance contains flammable gas, isobutane (R600a), a natural gas with a high level of environmental compatibility. Be careful not to cause damage to the refrigerant circuit containing isobutane.
-
Do not change the specification of this appliance.
-
Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer.
If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room. -
Do not let hot items to touch the plastic parts of the appliance.
-
Do not put soft drinks in the freezer compartment. This will create pressure on the drink container.
-
Do not store flammable gas and liquid in the appliance.
-
Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
-
Do not touch the compressor or the condenser. They are hot.
-
Do not remove or touch items from the freezer compartment if your hands are wet or damp.
-
Do not freeze again food that has been thawed.
-
Follow the storage instructions on the packaging of frozen food.
-
Wrap the food in any food contact material before putting it in the freezer compartment.
Internal lighting
WARNING!
Risk of electric shock.
- This product contains one or more light sources of energy efficiency class G.
- Concerning the lamp(s) inside this product and spare part lamps sold separately: These lamps are intended to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination.
Care and cleaning
WARNING!
Risk of injury or damage to the appliance.
- Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket.
- This appliance contains hydrocarbons in the cooling unit. Only a qualified person must do the maintenance and the recharging of the unit.
- Regularly examine the drain of the appliance and if necessary, clean it. If the drain is blocked, defrosted water collects in the bottom of the appliance.
Service
- To repair the appliance contact the Authorised Service Centre. Use original spare parts only.
INSTALLATION
WARNING!
Refer to Safety chapters.
- Please note that self-repair or non-professional repair can have safety consequences and might void the guarantee.
- The following spare parts will be available for 7 years after the model has been discontinued: thermostats, temperature sensors, printed circuit boards, light sources, door handles, door hinges, trays and baskets. Please note that some of these spare parts are only available to professional repairers, and that not all spare parts are relevant for all models.
- Door gaskets will be available for 10 years after the model has been discontinued.
Disposal
WARNING!
Risk of injury or suffocation.
- Disconnect the appliance from the mains supply.
- Cut off the mains cable and discard it.
- Remove the door to prevent children and pets to be closed inside of the appliance.
- The refrigerant circuit and the insulation materials of this appliance are ozone-friendly.
- The insulation foam contains flammable gas. Contact your municipal authority for information on how to discard the appliance correctly.
- Do not cause damage to the part of the cooling unit that is near the heat exchanger.
Dimensions
Overall dimensions ¹
H1| mm| 819
W1| mm| 596
D1| mm| 547
¹ the height, width and depth of the appliance without the handle
Space required in use ²
H2 mm 820
W2 mm 596
D2 mm 550
² the height, width and depth of the appliance including the handle, plus the space necessary for free circulation of the cooling air
- increased to 660 mm if the room temperature is greater than 38°C
Overall space required in use ³
H2| mm| 820
W3| mm| 777
D3| mm| 1120
³ the height, width and depth of the appliance including the handle, plus the
space necessary for free circulation of the cooling air, plus the space
necessary to allow door opening to the minimum angle permitting removal of all
internal equipment
** increased to 795 mm if the room temperature is greater than 38°C
Location
Refer to the installation instructions for the installation.
This appliance is not intended to be used as a built-in appliance.
In case of different installation from freestanding respecting space required
in use dimensions, the appliance will function correctly but energy
consumption might increase slightly.
To ensure appliance’s best functionality, you should not install the appliance
in a place with direct sunlight. Do not install the appliance close to
radiators or cookers, ovens, or hobs, unless otherwise specified in the
installation instructions.
Make sure that air can circulate freely around the back of the cabinet.
This appliance should be installed in a dry, well ventilated indoor position.
To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet shall be maintained. Ideally, however, the appliance should not be positioned below overhanging wall units. One or more adjustable feet at the base of the cabinet ensure that the appliance stands level.
CAUTION!
If you position the appliance against the wall, use back spacers provided or
keep the minimum distance indicated in the installation instructions.
CAUTION!
If you install the appliance next to a wall, refer to the installation
instructions to understand the minimum distance between the wall and the side
of the appliance where door hinges are to provide enough space to open the
door when the internal equipment is removed (e.g. when cleaning).
This appliance is intended to be used at ambient temperature ranging from 10°C to 38°C.
The correct operation of the appliance can only be guaranteed within the
specified temperature range.
If you have any doubts regarding where to install the appliance, please turn
to the vendor, to our customer service or to the nearest Authorised Service
Centre.
It must be possible to disconnect the appliance from the mains power supply.
The plug must therefore be easily accessible after installation.
Electrical connection
- Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply.
- The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.
- The manufacturer declines all responsibility if the above safety precautions are not observed.
- This appliance complies with the E.E.C. Directives.
CONTROL PANEL
Switching on
- Insert the plug into the wall socket.
- Turn the temperature regulator clockwise to a medium setting.
Switching off
To turn off the appliance, turn the temperature regulator to the “O” position.
Temperature regulation
The temperature is regulated automatically. However, you can set a temperature
inside the appliance yourself.
Choose the setting keeping in mind that the temperature inside the appliance depends on:
- Room temperature,
- Frequency of opening the door,
- Quantity of food stored,
- Appliance location.
A medium setting is generally the most suitable one.
To operate the appliance:
- Turn the temperature regulator clockwise to obtain a lower temperature inside the appliance.
- Turn the temperature regulator counterclockwise to obtain a higher temperature inside the appliance.
DAILY USE
CAUTION!
This refrigerating appliance is not suitable for freezing foodstuffs.
Positioning the door shelves
To permit storage of food packages of various sizes, the door shelves can be
placed at different heights.
- Gradually pull the shelf up until it comes free.
- Reposition as required.
This model is equipped with a variable storage box which can be moved sideways.
Movable shelves
The walls of the refrigerator are equipped with a series of runners so that
the shelves can be positioned as desired.
Do not move the glass shelf above the vegetable drawer to ensure correct air circulation.
Temperature indicator
For proper storage of food the refrigerator is equipped with the temperature
indicator. The symbol on the side wall of the appliance indicates the coldest
area in the refrigerator. If OK is displayed (A), put fresh food into
area indicated by symbol, if not (B), wait at least 12 hours and check if it
is OK (A).
If it is still not OK (B), adjust the setting control to a colder setting .
HINTS AND TIPS
Hints for energy saving
-
Most efficient use of energy is ensured in the configuration with the drawers in the bottom part of the appliance and shelves evenly distributed. Position of the door bins does not affect energy consumption.
-
Do not open the door frequently or leave it open longer than necessary.
-
Do not set too high temperature to save energy unless it is required by the characteristics of the food.
-
If the ambient temperature is high and the temperature control is set to low temperature and the appliance is fully loaded, the compressor may run continuously, causing frost or ice formation on the evaporator. In this
case, set the temperature control toward higher temperature to allow automatic defrosting and to save energy this way. -
Ensure a good ventilation. Do not cover the ventilation grilles or holes.
Hints for fresh food refrigeration
-
The medium temperature setting ensures good preservation of fresh food.
Higher temperature setting inside the appliance may lead to shorter shelf life of food. -
Cover the food with packaging to preserve its freshness and aroma.
-
Always use closed containers for liquids and for food, to avoid flavours or odours in the compartment.
-
To avoid the cross-contamination between cooked and raw food, cover the cooked food and separate it from the raw one.
-
It is recommended to defrost the food inside the fridge.
-
Do not insert hot food inside the appliance. Make sure it has cooled down at room temperature before inserting it
-
To prevent food waste the new stock of food should always be placed behind the old one.
Hints for food refrigeration
- Fresh food compartment is the one marked (on the rating plate) with
- Meat (all types): wrap in a suitable packaging and place it on the glass shelf above the vegetable drawer. Store meat for at most 1-2 days.
- It is advisable not to keep the exotic fruits like bananas, mangos, papayas etc. in the refrigerator.
- Vegetables like tomatoes, potatoes, onions, and garlic should not be kept in the refrigerator.
- Butter and cheese: place in an airtight container or wrap in an aluminum foil or a polythene bag to exclude as much air as possible.
- Bottles: close them with a cap and place them on the door bottle shelf, or (if available) on the bottle rack.
- Always refer to the expiry date of the products to know how long to keep them.
CARE AND CLEANING
WARNING!
Refer to Safety chapters.
Cleaning the interior
Before using the appliance for the first time, the interior and all internal
accessories should be washed with lukewarm water and some neutral soap to
remove the typical smell of a brand-new product, then dried thoroughly.
- CAUTION! Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish.
- CAUTION! The accessories and parts of the appliance are not suitable for washing in a dishwasher.
Periodic cleaning
The equipment has to be cleaned regularly:
- Clean the inside and accessories with lukewarm water and some neutral soap.
- Regularly check the door seals and wipe them clean to ensure they are clean and free from debris.
- Rinse and dry thoroughly.
Defrosting of the refrigerator
Frost is automatically eliminated from the evaporator of the refrigerator
compartment during normal use. The defrost water drains out through a trough
into a special container at the back of the appliance, over the motor
compressor, where it evaporates.
It is important to periodically clean the defrost water drain hole in the middle of the refrigerator compartment channel to prevent the water overflowing and dripping onto the food inside.
For this purpose use the tube cleaner provided with the appliance
Cleaning the air channels
- Remove the plinth (A), then the ventilation grid (B).
- Clean the ventilation grid.
- Carefully pull the air deflector out (C), checking that there is no water left from the defrosting.
- Clean the lower part of the appliance with a vacuum cleaner.
Period of non-operation
When the appliance is not in use for long period, take the following
precautions:
- Disconnect the appliance from electricity supply.
- Remove all food.
- Clean the appliance and all accessories.
- Leave the doors open to prevent unpleasant smells.
TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
What to do if…
Problem | Possible cause | Solution |
---|---|---|
The appliance does not operate. | The appliance is switched off. | Switch on the |
appliance.
| The mains plug is not connected to the mains socket correctly.| Connect the
mains plug to the mains socket correctly.
| There is no voltage in the mains socket.| Connect a different electrical
appliance to the mains socket. Contact a qualified electrician.
The appliance is noisy.| The appliance is not sup‐ ported properly.| Check if
the appliance stands stable.
The compressor operates continually.| Temperature is set incorrectly.| Refer
to “Control Panel” chapter.
| Many food products were put in at the same time.| Wait a few hours and then
check the temperature again.
| The room temperature is too high.| Refer to “Installation” chapter.
| Food products placed in the appliance were too warm.| Allow food products to
cool to room temperature before storing.
| The door is not closed correctly.| Refer to “Closing the door” section.
Door is misaligned or interferes with ventilation grill.| The appliance is not
levelled.| Refer to installation instructions.
Door does not open easily.| You attempted to reopen the door immediately after
closing.| Wait a few seconds between closing and reopening of the door.
The lamp does not work.| The lamp is in standby mode.| Close and open the
door.
| The lamp is defective.| Refer to “Replacing the lamp” section.
Problem| Possible cause| Solution
There is too much frost and ice.| The door is not closed correctly.| Refer to
“Closing the door” section.
| The gasket is deformed or dirty.| Refer to “Closing the door” section.
| Food products are not wrapped properly.| Wrap the food products better.
| Temperature is set incorrectly.| Refer to “Control Panel” chapter.
| Appliance is fully loaded and is set to the lowest temperature.| Set a
higher temperature. Refer to “Control Panel” chapter.
| Temperature set in the appliance is too low and the ambient temperature is
too high.| Set a higher temperature. Refer to “Control Panel” chapter.
Water flows on the rear plate of the refrigerator.| During the automatic
defrosting process, frost melts on the rear plate.| This is correct.
There is too much codensed water on the rear wall of the refrigerator.| Door
was opened too frequently.| Open the door only when necessary.
| Door was not closed completely.| Make sure the door is closed completely.
| Stored food was not wrapped.| Wrap food in suitable packaging before storing
it in the appliance.
Water flows inside the refrigerator.| Food products prevent the water from
flowing into the water collector.| Make sure that food products do not touch
the rear plate.
| The water outlet is clogged.| Clean the water outlet.
Water flows on the floor.| The melting water outlet is not connected to the
evaporative tray above the com‐ pressor.| Attach the melting water outlet to
the evaporative tray.
The temperature in the appliance is too low/too high.| The temperature is not
set correctly.| Set a higher/lower temperature.
| The door is not closed correctly.| Refer to “Closing the door” section.
Problem| Possible cause| Solution
| The food products’ temperature is too high.| Let the food products
temperature decrease to room temperature before storage.
| Many food products are stored at the same time.| Store less food products at
the same time.
| The thickness of the frost is greater than 4-5 mm.| Defrost the appliance.
| The door has been opened often.| Open the door only if necessary.
| There is no cold air circulation in the appliance.| Make sure that there is
cold air circulation in the appliance. Refer to “Hints and Tips” chapter.
If the advice does not lead to the desired result, call the nearest Authorized Service Centre.
Replacing the lamp
The appliance is equipped with a longlife LED interior light.
It is strongly recommended to use original spare parts only.
Use LED bulbs (E14 base) only. The maximum power is shown on the lamp unit.
CAUTION!
Disconnect the plug from the mains socket.
- Using a screwdriver, remove the screw from the lamp
- Detach the lamp cover in the direction of the Arrows
- Replace the bulb with the one that has identical characteristics and is specifically designed for household appliances.
- Reassemble the lamp
- Tighten the screw to the lamp
- Connect the plug to the mains socket.
- Open the door.
Make sure that the light switches on.
Closing the door
- Clean the door gaskets.
- If necessary, adjust the door. Refer to installation instructions.
- If necessary, replace the defective door gaskets. Contact the Authorised Service Centre.
NOISES
TECHNICAL DATA
The technical information is situated in the rating plate on the internal side
of the appliance and on the energy label.
The QR code on the energy label supplied with the appliance
provides a web link to the information related to the performance of the
appliance in the EU EPREL database. Keep the energy label for reference
together with the user manual and all other documents provided with this
appliance.
It is also possible to find the same information in EPREL using the link:
https://eprel.ec.europa.eu and the model name and product number that you
find on the rating plate of the appliance.
See the link www.theenergylabel.eu for
detailed information about the energy label.
INFORMATION FOR TEST INSTITUTES
Installation and preparation of the appliance for any EcoDesign verification
shall be compliant with EN 62552. Ventilation requirements, recess dimensions
and minimum rear clearances shall be as stated in this User Manual at Chapter
3. Please contact the manufacturer for any other further information,
including loading plans.
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol . Put the packaging in relevant
containers to recycle it. Help protect the environment and human health by
recycling waste of electrical and electronic appliances. Do not dispose of
appliances marked with the symbol with the household waste. Return the product
to your local recycling facility or contact your municipal office.
References
- Electrolux
- Electrolux
- Electrolux
- Register Your Appliance – Product Registration – Electrolux
- APPLiA Europe | The new Energy Label | Belgium
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>