Electrolux DBGL1032CN Cooker Hood User Manual

: October 30, 2023
: Electrolux

Table of Contents

Electrolux DBGL1032CN Cooker Hood
Product Information
Product Usage Instructions
SAFETY INFORMATION AND INSTALLATION
PRODUCT DESCRIPTION
- Control panel overview
DAILY USE
- Using the hood
- Remote-control
CARE AND CLEANING
- Cleaning the grease filter
ENVIRONMENTAL CONCERNS
Documents / Resources

Electrolux DBGL1032CN Cooker Hood

Electrolux-DBGL1032CN-Cooker-Hood-product

Product Information

The Electrolux Cooker Hood is available in different models including DBGL1032CN, DBGL5432CN, DBGL7732CN, KFG726R, KFG726X, LFG716W, LFG716X, LFG719R, LFG719W, and LFG719X. It is a stylish and innovative product that has been designed with the user in mind, providing great results every time it is used. The product comes with a user manual that includes safety information, installation instructions, and product description.

Control Panel Overview
The control panel of the Electrolux Cooker Hood has seven buttons:

Function Control Indicator
Lights On/Off
First Speed Level
Second Speed Level
Third Speed Level
Maximum Speed Level
Filter Notification

Daily Use
The Electrolux Cooker Hood is recommended to be used at different speeds depending on the cooking activity. The recommended speeds are:

Cooking Activity	Recommended Speed
Heating up food, cooking with covered pots	First or Second Speed Level

Cooking with covered pots on multiple cooking zones or burners,
gentle frying| Second Speed Level
Boiling, frying big quantities of food without a lid, cooking
on multiple cooking zones or burners| Third Speed Level
Boiling, frying big quantities of food without a lid, big
humidity| Maximum Speed Level

It is recommended to leave the hood operating for approximately 15 minutes after cooking.

Product Usage Instructions

Refer to the separate Installation Instructions booklet for Safety Information and Installation. Read carefully the Safety chapters before any use or maintenance of the appliance.
To operate the hood, press the first speed button to switch on the appliance.
If needed, press the light button to illuminate the cooking surface.
If needed, change the speed by pressing the desired button.
To turn off the appliance, press the first speed button again.
The hood can also be operated automatically by connecting it with a hob that has an infrared signal communicator. The speed of the fan is defined automatically based on the mode setting and temperature of the hottest cookware on the hob. The function can be activated from the panel of the hob.
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.

WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time. Welcome to Electrolux.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information: www.electrolux.com/support.
Register your product for better service: www.registerelectrolux.com.
Buy Accessories, Consumables and Original spare parts for your appliance: www.electrolux.com/shop.

CUSTOMER CARE AND SERVICE
Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate.

Warning/Caution-Safety information
General information and tips
Environmental information

Subject to change without notice.

SAFETY INFORMATION AND INSTALLATION

WARNING!
Refer to the separate Installation Instructions booklet for Safety Information and Installation. Read carefully the Safety chapters before any use or maintenance of the appliance.

PRODUCT DESCRIPTION

Control panel overview

	Function	Description
1	Hob²Hood	Indicator of the function to control hood from hob.
2	Lamp	Turns the lights on and off.
3	First speed / Off	The motor switches to first speed level. Second press

DAILY USE

Using the hood

Check the recommended speed according to the table below.

While heating up food, cook with covered pots.
While cooking with covered pots on multiple cooking zones or burners, gentle frying.
While boiling, frying big quantities of food without a lid, and cooking on multiple cooking zones or burners.
While boiling, frying big quantities of food without a lid, big humidity. The hood operates on maximum speed. After 6 minutes the appliance returns to the previous setting.

It is recommended to leave the hood operating for approximately 15 minutes after cooking.

To operate the hood:

Press the first-speed button to switch on the appliance.
If needed, press the light button to illuminate the cooking surface.
If needed, change the speed by pressing the desired button.

To turn off the appliance press the first speed button again.

Hob²Hood function
It is an automatic function which connects the hob with a hood. Both the hob and the hood have an infrared signal communicator. Speed of the fan is defined automatically on basis of mode setting and temperature of the hottest cookware on the hob. You can also operate the fan using the hob manually. The function can be activated from panel of the hob.

For more information how to use the function refer to the hob user manual.

Filter notification
Filter alarm reminds to change or clean the charcoal filter and clean the grease filter. The filter indicator is turned on for 30 seconds if the grease filter must be cleaned. The filter indicator flashes for 30 seconds if the charcoal filter must be replaced or cleaned.

Refer to cleaning the grease filter in care and cleaning chapter.
Refer to cleaning the charcoal filter or replacing the charcoal filter in care and cleaning chapter.

To reset the function press the button for 3 seconds.

To activate or deactivate the function:

1. To activate the function press the button for 3 seconds.
If the function is activated, the indicator flashes two times.
2. To deactivate the function press the button for 3 seconds.
If the function is deactivated, the indicator flashes once.

Remote-control

The appliance can be controlled with a remote control. Visit a local supplier to buy the remote control. The connection is originally enabled.

To connect or disconnect the remote control:

Switch off the appliance.
Press the for 3 seconds.
The indicator on the control panel flashes twice if the function is enabled and once if disabled.

CARE AND CLEANING

Notes on cleaning

Do not use abrasive detergents and brushes.
Clean the surface of the appliance with a soft cloth with warm water and mild detergent.
After cooking some parts of the appliance can get hot. To avoid stains appliance must be cooled down and dried with a clean cloth or paper towels.
Clean stains with a mild detergent.
Clean the appliance and grease filters each month. Clean the interior and grease filters carefully from fat. Fat accumulation or another residue may cause a fire.
Follow the instructions for cleaning the accessories when the filter notification is on. Refer to Filter notification in the daily use chapter.
Grease filters can be washed in a dishwasher.
The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolour, it has no influence on the performance of the appliance.
The time of saturation of the charcoal filter varies depending on the type of cooking and the regularity of cleaning the grease filter. The activated charcoal filter is not washable, cannot be regenerated and must be replaced approximately every 4/6 months of operation, or more frequently for particularly heavy usage.

Cleaning the grease filter

Filters are mounted with the use of clips and pins on the opposite side.

To clean the filter:

Press the handle of the mounting clip on the filter panel underneath the hood (1).
Slightly tilt the front of the filter downwards (2), then pull. Repeat the first two steps for all filters.
Clean the filters using a sponge with non-abrasive detergents or in a dishwasher.
- The dishwasher must be set to a low temperature and a short cycle. The grease filter may discolour, it has no influence on the performance of the appliance.
To mount the filters back follow the first two steps in reverse order. Repeat the steps for all filters if applicable.

Replacing the charcoal filter

WARNING!
The charcoal filter is non-washable!

To replace the filter:

Remove the grease filters from the appliance. Refer to “Cleaning the grease filter” in this chapter.
Press the front edge in slot towards the bottom part of the filter. Slightly tilt the front of the filter downwards.
To install a new filter, perform the same steps in reverse order. In any case, it is necessary to replace the filters at least every four months.

Replacing the lamp
This appliance is supplied with a LED lamp and a separate control gear (LED driver). These parts can be replaced by a technician only. In case of any malfunction refer to “Service” in the “Safety Instructions” chapter.

ENVIRONMENTAL CONCERNS

Recycle materials with the symbol. Put the packaging in relevant containers to recycle it. Help protect the environment and human health by recycling waste of electrical and electronic appliances. Do not dispose of appliances marked with the symbol household waste. Return the product to your local recycling facility or contact your municipal office.

www.electrolux.com/shop

Documents / Resources

| Electrolux DBGL1032CN Cooker Hood [pdf] User Manual
DBGL1032CN, DBGL5432CN, DBGL7732CN, KFG726R, KFG726X, LFG716W, LFG716X, LFG719R, LFG719W, LFG719X, DBGL1032CN Cooker Hood, DBGL1032CN, Cooker Hood, Hood
---|---