UNBRANDED S18 Electric Mountain Bike User Manual

June 4, 2024
UNBRANDED

UNBRANDED S18 Electric Mountain Bike

UNBRANDED-S18-Electric-Mountain-Bike-product

SW-LCD display

  • OPEN: Mode/M 1.5 seconds long press.
  • CLOSE: ln standby mode, long press Mode/M for 3 seconds.
  • SETTING: After booting, press UP+DOWN for 2.5 seconds(exit in the same way) The detailed settings are as follows:(on the boot state).

Wheel Diameter Setting:

  1. UP or DOWN
  2. 16-28inch(default 26inch)
  3. Select, Mode Confirm

Speed Setting:

  1. UP or DOWN
  2. 12-45 KM/H
  3. Select, Mode Confirm

Light Setting:

  1. UP or DOWN
  2. 1-3 (Brightness)
  3. Select, Mode Confirm

MPH/KM Setting:

  1. UP or DOWN
  2. MPH or KM/H
  3. Select, Mode Confirm

SPEED Setting:

  1. UP or DOWN For 3 seconds
  2. MAX/AVG/NOW
  3. Select, Mode Confirm

RANGE Setting:

  1. PRESS Mode/M
  2. Riding mileage/accumulated total mileage

Front Light Open:

  1. Exit Settings
  2. UP FOR 3 Seconds
  3. The front lamp will work
  4. Default: 1

Power Shift Setting:

  1. Exit Settings
  2. UP/DOWN
  3. 1-5 (Power)
  4. Default: 1

Cruise Mode Setting:

  1. Exit Settings
  2. PRESS DOWN FOR 3 Sec­onds
  3. Default: 6KM/H
  4. Pushing state, non-riding

Controller

  1. Battery negative connection line
  2. Battery positive connection line
  3. Phase line
  4. Tail light wire
  5. Integrated main line
  6. Power sensor line
  7. Motor Hall plug wireUNBRANDED-S18-Electric-Mountain-Bike-fig-10
  8. Please be careful not to get water into the controller box
  9. When the bike does not work: 1 )Check the connection of controller cables;
  10. Try to restart or Replace the controller; 3)Contact us by email

Motor Maintenance

UNBRANDED-S18-Electric-Mountain-Bike-fig-11

  1. Please check the integrity of the motor blocking piece regularly.
  2. Please check the integrity of the cable before and after riding.
  3. Please check the integrity of the motor shell before and after riding.
  4. Please do not use the motor in extreme environments, and do not let the motor work in water.
  5. When you find the motor power is insufficient, please get out of the bike and not force it.

FAQ

  • Is there a power usage or battery gauge on the bike?
    Yes, there is a full-screen LCD display. There is also an additional LED battery gauge on the side of the battery pack. 2x the info!

  • Is there a switch to prevent accidental starting?
    Yes, there is an on/off button on the battery pack. The brake levers also come standard with a safety power stop switch built in.

  • How do I lock it up and what can I do to help minimize the chance of it being stolen?
    AOSTIRMOTOR Bike has some great anti-theft features, including a locking battery rack with keys to keep the bike safe, and a rear wheel that is bolted down to reduce the chances to be stolen. Most standard U-locks and cable locks work fine on our AOSTIRMOTOR Ebike.

  • Does it work in the rain?
    The components are all waterproof and work very well in wet conditions, But we do not suggest using our bike on a rainy day. We suggest that you should keep your bike parked indoors and keep him in a dry situa­tion.

POWER BRINGS JOY
www.AOSTIRMOTOR.com. [email protected].

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

UNBRANDED User Manuals

Related Manuals