LEMOISTAR FW2 10 Inch Wall Mounted Oscillation Fan User Manual

October 30, 2023
LEMOISTAR

LEMOISTAR FW2 10 Inch Wall Mounted Oscillation Fan

Always here to help you

for any question or any help , please shoot a message to support@limo- it.com

HOWTO INSTALL

  1. Insert the holder to the screw into fan. please align the bulge in the holder with the groove part of the screw. then rotate the fixed Knobe clockwise to tighten it
    Notice: please make sure that the screw is vertical when fixing.

  2. Pass the type c plug through the fan base  as shown and insert into the type C port.

  3. Put the cable into the wire slot,

  4. Embed the motor body into the base.
    Ps: the slot under the motor body needs under to be inserted into the base first, and then embedded in the whole.

  5. After the motor body is completely embedded in the base.

Push  down the fixing buckle on the back of the base to lock it..

  1. Insert the cable into the type c port.

  2. First wipe off the dust on the surface where the wall needs to be installed.
    Then fix the wall bracket with super  glue ( included ) or nails ( included ).

  3. If you use glue. after the shelf is atached hte fixing strips ( inclued ) on the left and right sides.
    Then wait 48 hours before hanging the fan.

  4. Hang the fan base on the brackrt.

PACKAGE CONTANT

1*fan (2.2Ib/1020g) 1* Wall Bracket
2* Nails 1*Adapter(1.8m/5.9feet)
2 *fixing strip 1* Superglue
1* Remote Control 1*Instruactions
1* bases 1*Holder

SPECIFICATIONS

Product Name 10inch Wall fan-FW2
Main material ABS Plastic
Input DC12V1A
Output 12v/1.0A
Rated power 12W
Oscillating Degree 90
Vertical tilt Degree 60
Size information 8.69.811inches/218250280mm
Timer(hours) 0.5-1.5-4-8
RPM 600-1000-1200-138OR/min

HOW TO CLEAN

  1. Disconnect power cord from the plug.
  2. Use the screwdriver(not included) ato take the 4 (diameter is 0.1 inches) screws off
  3. Clean the fan with a clean cl0th. ( the fans head is not waterproof don’t put it into water or don’t use a damp cloth)
  4. Put the cover back.

Notice : Cleaning and maintenance shell not be done by children without supervision

TROUBLE SHOOTING

Question Possible Reason Suggested solution

Not working
No power| No power| Check the power supply
Power core , plug or socket damaged or not connected| Check the status of plug and socket are wall connected
Abnormal voltage| Check if the voltage of power supply is too high/low
Check the power plug and socket
Check if the socket overload or extend socket damage

PRODUCT DETAILS

BUTTON CONTRAOL

| Cycle in low-Mid-High-super-off)
Note: Long press to turn it off when this fan is running
---|---
| Oscillating(ON/OFF)
| Cycle in 0.5-1.5-4-8 hours

ATTENTION

  1. If the supply c0rd is damaged. it must be replaced by the manufacturer , its service agent or similarty qualified persons in order to aviod a hazard.
  2. Do not cover appliance by clothes or other object when operating to aviod overheat ot motor jam
  3. Do not use the power supply with power/voltage not match with this appliance . unplug and well stored the appliance if not in use.
  4. Stay away from the high temperature envirment or nearby the stove. otherwise, the operation of this appliance may be afffected
  5. Do not touch the supply cord and mains to aviod electrical shock . Do not pull the supply cord to liftt or move this applaince.
  6. The appliance should not be immersed when cleaning after used.
  7. Keep out of reach often children , children are not allowed to operate.
  8. It is intended to be used in household only.
  9. Do not disassemble any part of this appliance. otherwise, warranty would become ineffecive.
  10. Do not modify this appliance or in conjunction use with other instruments to aviod dangerous
  11. for yor safety , please do not put fingers or any foreign object into the fan
  • This appliance is not intended for use by persons*(included children) with reduced physcial , sensory or mental capabillties , or lock of experience and knowlegde ,uless they have been given supervision or instruction  concerning use of the appliance by  a person responsible for their safety
  • Do not place this appliance in the following envirment
    • very moist place like basement
    • Place exposed direct sun light or rain
    • Place for storage explosive materials
    • Extremely hot or coldplace
  • Please contact our customer service center for further assistance

WARRANTY

To ensure that we meet your needs , one year warranty is included from the purchase date for any defective products. the incorrect human operation , including disassembling , burning ,soaking and dropping are not covered under warranty. please write to support@limo-it.com for further assistance.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device mu st accept any interference received, including interference that may cause undesir ed operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide  reasonable protection against harmful interference in a residential installation. This equip ment generates uses and can radiate radio frequency energy and, if not installed and use d in accordance with the instructions, may cause harmful interference to radio communic ations. However, there is no guarantee that interference will not occur in a particular insta llalion. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to t ry to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radiornv technician for help important announcement

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals