Qifan Lighting QF-TD-24W Rotary Table Lamp User Manual
- June 4, 2024
- Qifan Lighting
Table of Contents
Qifan Lighting QF-TD-24W Rotary Table Lamp User Manual
Description of Function
DESK LAMP PRESS
ON/OFF
ROTATE LEFT:-
ROTATE RIGHT:+
NIGHT LIGHT CLICK
ON/OFF
LONG PRESS TIMING
1 BLINK TIMED 30 Min 1
2 BLINK TIMED 60 Min 2
3 BLINK TIMED 90 Min 3
COLOR TEMPERA TURE
CLICK
2700K-6300K
Wireless charging indicator
USB charging indicator USB
Attention: Wireless charging, USB charging and desk lamp lighting can
work at the same time.
Use of Attention
- To ensure the use effect, Please use the original power adapter.
- Please keep the lamp away from water or other liquids.
- If you need to clean the Rotary Table Lamp, please make sure that the power is disconnected.
- If the lamp doesn’t work, please do not disassemble it on your own in case of electric shock.
- To avoid damage to the eyes, please do not look directly at the light source of the lamp for a long time.
Note: For your safety, please abide by the above precautions.If NOT using the desk lamp and power adapter in accordance with the above precautions, we will not be responsible for any damage to the Rotary Table Lamp or any other accidents.
Functional characteristics
Flicker-free, UV-free.
Rotary Switches, easy operation.
Switch click stepless dimming, Choose natural light, white light, warm
light.
Use of imported LEDS, long service life.
Features wireless charging and USB charging ports.
Night light Setting the time function.
Night light With memory function.
Flexible rotating shaft, which can adjust lighting angle at will.
Folding structure, simple and elegant design.
Instructions
-
Plug the power adapter into a power socket （Specifications are DC
12V/2A) -
After power is applied Press the switch to turn on the light.The light colour is selected with a touch of a button.You can use the lamp according to the chart on the “Description of Function” page.
-
The Maximum output power of the USB output port is 5V/1A.
-
Place the mobile phone, or other divice with wireless charging receiver, on the wireless charging panel of the desk lamp.Mind that the center of the receiving coil must be aligned with the center position of the desk lamp’s wireless charging panel. When the power indicator changes from red to green, the mobile phone is charged.
-
Adjust the lighting angle through flexibly turning the head and arm of the desk lamp.
Note :Excessive adjustment of the joint part of the product can cause joint unction damage.
Specifications
Product name: Rotary Table Lamp
Product model: QF-TD-24W
Input: DC 12V/2A
Wireless charging output: 10W
USB charging output: 10w
Light service life: 50000hour
Material: Plastic
Lamp power: ＜6W
Color temperature: 2700k-6500k
Size of Products: 7517.5in
Product weight: 900g
Wireless charging time: 5h
USB charging time：5h
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.