AVALANCHE 20201017 Aluminum Alloy Core Bed Installation Guide
- October 30, 2023
- AVALANCHE
Table of Contents
AVALANCHE 20201017 Aluminum Alloy
The
AVALANCHE is a customized device with an aluminum alloy core bed. The version
number is 20201017. When purchasing the device, you agree to the purchase
agreement. Our company does not accept returns or replacements without reason.
Purchase agreement：
When you start to pay the down payment or full payment for our device, it
means that you have agreed to the purchase agreement of our device. Since our
device belongs to customized series, our company still does not accept the
return and replacement without reason.
Inspection Rules
Before signing for the device, please confirm whether the outer package is intact by taking photos or videos of the goods. After unpacking, verify the integrity and functionality of the device to ensure it can be used normally.
Use Agreement
Before use, correctly assemble the instrument according to the instructions. Clean the dirt and ash layer on the surface, track, and parts of the instrument.
Warnings:
- Do not use the device without the guidance of a professional trainer.
- Children under 18 years old must not use the device alone.
- Reliability and safety tests must be conducted before use.
- Our company is not responsible for any failure to use the device according to instructions.
Accessory Name
| Accessory name | Notes |
|---|---|
| Bed body | The aluminum alloy body does not need to be |
| Square box & box | |
| Springboard | It’s at the head of the bed |
| sliding panel | No assembly required |
| Soft pedal | without |
| Pull rope & foot | Shuttle according to the sample map |
| Draw bar | Fix according to the sample drawing |
| head pillow | Insert according to the sample |
| Heighten feet | The heightening foot is custom-made |
Note: The aluminum alloy body does not need to be assembled at the head
of the bed. No assembly is required without shuttle according to the sample
map. Fix according to the sample drawing.
Insert according to the sample. The heightening foot is custom-made.
Installation Instructions
-
Installation of flexible plug board (baffle & springboard)
-
Soft shoulder installation (the device used by shoulder is big and small gourd mouth + bolt device, safe and reliable)
-
Installation of draw rope rod (draw rope rod is divided into stainless steel pipe and bolt)
-
There are several installation methods for the installation of the pull rope. The following figure shows the general installation method:
-
The installation legend of the heightening foot is tail, and the right is head. The direction of the foot should not be wrong, as follows:
-
Tail foot (the other end without the handrail belongs to the tail foot)
-
The front foot, with carrying wheel, should be assembled at the lower foot of the head (the head with supporting rod belongs to the front foot)
-
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>