FORESiGHT SPORTS GC3 Launch Monitor User Manual

: June 10, 2024
: FORESiGHT SPORTS

FORESiGHT SPORTS GC3 Launch Monitor

SPORTS GC3 Launch Monito

Introduction

GOOD THINGS REALLY DO COME IN THREES

The GC3 is the Game Changer you’ve been holding out for. Industry-leading performance insight and true-to-life simulation come together in our most approachable offering yet. Thanks to the advanced photometric technology inside, the GC3 remains accurate and reliable both on the range and in your home simulator. Combine it with our FSX performance and gaming suite and enjoy hundreds of world-class courses, skill-building games, and global leagues and competitions. This user manual will help you better understand the proper set- up, operation, and care of your GC3.

Getting Started

WELCOME TO YOUR GC3

What’s In The Box

A. GC3

B. Power Cord
C. A/C Power Adapter

D. USB-C Cable

E. 28 Club Marker Pack

F. Alignment Stick

Feature Overview

You can use your GC3 right out of the box, but it is recommended that you plug in your GC3 and allow the battery to fully charge before use.
To power on the GC3, press and release the power button. The GC3 Indicator light will illuminate. To power off the GC3, press and release the power button again.

Powering on and Connecting to the Internet

The first time you power up your GC3, you will be prompted to connect to the internet.
There are multiple ways to accomplish this:

1. Wi-Fi: To connect with Wi-Fi, choose your network, then enter the password.
2. Wired Ethernet Cable: Alternatively, you can connect to a PC via an Ethernet cable by connecting to either your local router or switch.
Powering on and Connecting to the Internet
Note: To use all the functions of the GC3, it must connect to the internet at least once every 45 days. You will see a warning if you need to connect within 5 days. After 45 days, the GC3 will no longer connect with any supporting apps or software and you will see a screen prompting you to connect to the internet to restore all functions.

Indicator Light Settings

Indicator Light Colors:

Blue: indicates that the device is in Ball Mode
Red: indicates a error is present on the product. This would represent a Error Status.
White: indicates the device has the Quick Launch Menu Open. To resume use be sure to close the quick launch menu.

Indicator Light Status:

Blinking: Indicates the device is looking for a ball.
Solid: Indicates the device has locked onto a ball and is now ready for use.

Registration

Once connected to the internet, you will see a Registration QR Code on the GC3 display. Simply scan the code with your phone or tablet and follow the prompts to set up a login and register your device.

The GC3 requires online validation renewal every 45 days. If the validation of your device has expired, all data channels from the GC3 (USB, Ethernet, Wi-Fi & Bluetooth) will be blocked until validation renewal is completed. The GC3 will continue to work as a stand-alone device.

To find current registration information, swipe down to access the quick settings page and tap ABOUT, then ACCOUNT. Should you need to reach the registration page and are unable to locate the QR code, tap the ABOUT option, then WEB DASHBOARD.

Subscriptions

If you see the ADD A SUBSCRIPTION screen, scan the QR code with your phone or tablet and follow the prompts to set up your subscription.

Ball Placement & Hitting

To use your GC3, place upright approximately 2 feet away from the hitting area. If you are using a hitting mat, make sure the GC3 is raised to the same level as the hitting surface.
Ball Placement & Hitting

Place the ball on the ground in front of your GC3. If the ball is

outside of the hitting zone, you will see the MOVE BALL INTO HITTING ZONE display. If there are multiple balls in the hitting zone, you will see the MULTIPLE BALLS DETECTED display. Once the ball is in the hitting zone, the GC3 will display the READY screen and the LED light will change from blinking to solid After hitting the ball, the GC3 records your speed, launch angle, push/pull, spin, and carry.

Ball Data Explained

Speed| The measrrement of velocity just after impact. Ball speed is the main component in generating distance.
---|---
Launch Angle| The intial vertical angle of ascent relavitve to the ground measured in degrees. The lanch angle combined with ball spain anfd speed, detrmines the ball carry and total distance.
Push/Pull| In right -handed mode,push is when the horizintal direction of the ball is greater than or equal to zero. the ball moves’in to out away from the hitter .pull is the opposite ;the ball moves ‘out to in ‘towards the hitter.
Carry| the total distance of flght.
Slide Spain| the degree of side aways ( horizental )spin.a component of total spin that defines ball curvature or short shape. the more sider spin ,the greater the ball curvature.
Black Spain| The backward rotation of the ball. a component of total spin that defines ball lift and trajectory . the more back spin the greter the ball height .

Quick Settings

Navigating The Menu Screens

On your GC3 display, swipe down to access the Quick Settings page. On the Quick Settings display, you can access the BACKLIGHT, SETTINGS, LEFT/RIGHT- HANDED modes, ABOUT, and you can check the battery life.

Quick Settings Explained

Back light	Turn on/off the Screens back light
Setting	Turn on/off tracking mode ,acess target alignment ,check fire ware

,chosse unit of measurement .access WiFi . change the dispaly ,access diagnostics , access shot saver.
Left/Right handed| Toggle between leftt and right handed modes .
About| Access account information,version .patent. system information.web dashboard .and counters
Battery| check battery life .

Club Tracking

To turn on Club Tracking mode, swipe down to access the Quick Settings page, then go to SETTINGS, then TRACKING MODE.

Indicator Light Colors:

Blue Indicator Light indicates that the device is in Ball Mode
Green Indicator Light indicates that the device is in Club & Ball Mode

Applying a Club Marker

open the club marker packet (included) and follow the directions to apply the club marker to your club.

Clean the clubfaces with an alcohol pad or water.

Place club marker at the location (Above ) on the clubfaces , adhesive side down.

Firmly apply pressure to the club marker with your finger and gently pull the tab away ,leaving only marker on the clubface.

Club Data Explained

After your next swing, your GC3 will now display club speed, path in and path out, angle of attack, and efficiency.

Club Speed| The speed the club is traveling just prior to impact. A higher speed means greater potential distance.
---|---
Path in/Path out| The Direction the club head is moving at impact . A ‘0’path is astraight shot. A negative path means the ball moves ‘out to in’ and a positive path means the ball moves “in to out “.
Angle of Attack| The vertical angle of the club head at impact. Apositive number is hitting up on the ball and a negative number is hitting down on the ball.
Effiency| Efficiency, also known as Smash Factor , is the ratio between club head and golf ball velocities. a

Target Alignment

Using Alignment Stick

Target Alignment

To activate target alignment, swipe down to access the Quick Settings page. Select SETTINGS, then go to TARGET ALIGNMENT

USING THE ALIGNMENT STICK

Target alignment can be adjusted up to 10 degrees on the GC3 via the FSS Alignment Stick. To adjust alignment, place the FSS Alignment Stick in the GC3 hitting zone and align to your target. Once aligned, step away from the device to allow for calibration.

Using the Alignment Stick

After a few seconds, both LED indicators will show yellow and the unit will give an audible tone. The new alignment angle will be shown on the LCD screen.
Alignment can be viewed and reset at any time from the Target Alignment menu in System Options. To reset alignment to factory default in this screen, press the OK key. Alignment is always reset when the unit is powered off.

Storage And Maintenance

How to store the GC3
Prior to storing the GC3, make sure the device is powered off. Store the GC3 in a cool, dry environment in its original foam-lined packaging or in a specially designed carrying case to prevent damage.

Cleaning the GC3
To remove dirt, wipe the device with a damp cloth, be sure to gently clear the lenses in order to avoid scratching them. You may use an air can or compressed air to gently blow of loose items as well.

Safety

Safety Tips For Your GC3

To charge your GC3, use the power adapter that came with the device. Using any other power adapter or charger may cause damage to the device and may cause fire or injury.
DO NOT disassemble, change, or attempt to repair the GC3. This could result in electric shock and will void the manufacturer’s warranty.
DO NOT use the GC3 in environments where high humidity, smoke, or dust is present.
To avoid possible injury, DO NOT look directly into the GC3 when it is turned on.
If foreign objects or water enter the GC3, disconnect the device from external power and turn the power off. Continued use in this state can cause fire or electric shock.
The GC3 uses three digital cameras that are precisely calibrated. Do not drop or subject the device to any impacts.
After use, always store the GC3 in a safe, dry, and dust-free environment

Battery

Caution: Battery to be replaced only by a service professional. Risk of explosion if replaced with an incorrect type.

Specifications

Battery Life	5-7 HOURS
DIMENSION	6 Lx6.2 Wx12H
INTERFACES	USB-C/ Ethernet/ WiFi/Bluetooth
BALL DATA Collected	Ball Speed/Launch Angle/ Azimuth/Total Spin/Spin Axisw
Club Data Collected	Club Speed/ Smash Factor/Angle of Attack/path inout
Wegiht	5 vibes(2.3 kg)