RGNEGO FYD-926 Wood Induction Speaker User Manual

FYD-926 Wood Induction Speaker
User Manual

Function of Push-Buttons

1. Audio zone
2. Charging indicator light
3. ON/OFF button
4. 5V Power input port
5. AUX input port
6. Speaker

Thank you for choosing this product, before using, please fully charge it, and read user instruction. carefully.

Product features:

Exterior play back fucntion
Dual stereo speakers
Wood material
Built-in bass unit
*Charging LED light

Operation Instruction :

1. Charging speaker
   When charging to speaker, the charging indicator light lit simultaneously (red, blue light), it means it is charging. When fully charged, the red light is off, the charging time is about 4 hours. Can be charged via computer or charger 5V / 500mA to the product.

2. Proper use of the speaker
   Shutdown mode, the toggle switch is set to “ON” position, then blue light ON, the speaker start to work. External audio player Connect one end of the 3.5mm audio cable to the playback device and the other end to “AUX IN” interface of the speaker, you can hear audio playback from the device.

3. Low battery indicator
   When the blue light is dimmed or sound significantly smaller, indicating that the battery power is nearly exhausted, should be charged promptly.

Troubleshooting

1. Silent
   a, Whether the toggle switch to ‘ON” position, if on the “OFF” position, set the switch to “ON” position;
   b, Blue light indicates whether the product have power, if not lit, please charge it before use;
   c, Whether external audio play back device has opened, check and replace the audio cable; d, Whether put the speaker of the phone within induction area of the product

2. Small sound
   a, In normal use, the work light is significantly dimmed, charge it before use;
   b, External audio player sound is too small, you can transfer large to appropriate sound;
   If the above operations can not correct the problem, contact your service provider.

Accessories :
Speaker, charging cable, 3.5mm audio cable, instruction manual
Parameters:

Product name: Wood induction speaker (FYD-926)
Output Power: 403Ω
S/N: 80dB
THD: 5.1%| Playing time: 6-8 hours Battery Capacity: 1000mAh input power: DC5V/500mA Power Plug type: Micro USB Product size: 1457543mm Net Weight: around 180grams
---|---

FCC warning：

1. This device should be installed and operated with minimum distance 20cm between the radiator & your body.

2.  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
   (1) This device may not cause harmful interference, and
   (2) This device must accept any interference received, including interference that may cause undesired operation.

3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

4. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
   —Reorient or relocate the receiving antenna.
   —Increase the separation between the equipment and receiver.
   —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
   —Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>