Asnrc TWS5.2 Bluetooth Headset Instruction Manual

Asnrc TWS5.2 Bluetooth Headset

OVERVIEW

SPECIFICATION

• Matching mode: automatic matching

• Power-on prompt: power-on.

• Power off prompt: power off.

• Pairing status: bluetooth connected

• Connection status: bluetooth is connected

• Low power hint: low power.
  Key functions:

• Power on: long press 3 seconds to power on

• Power off: long press 3 seconds to power off

• Pause/play: click music to pause

• Answer/hang up the phone: / click on the incoming call to answer/hang up the phone

• Last place redial phone: double-click the last place to replay

• Last hit: three hits last hit

• Next song: three strikes next song

• Voice assistant/Sir: long press 2 seconds to summon Sir

• Language switch: double click on the matching red and blue lights

• Unconnected standby: automatically shuts down after 10 minutes.

Product parameter information

Bluetooth version: V5.2

Move the charging bin parameters

1. Input current 5V 1A
2. Output current 5V 300mAh
3. Charging time of charging warehouse: about 1H
4. Operating temperature: -10°C-55°C

Operating instructions

• Special note: if you use the headset for the first time or use it again after 1 hour, you need to take out the headset and put it back The charging warehouse wakes up the earphone, realizing the function of earphone automatically starting; The earphones are ready by the time they leave the factory Ear matching. If the left and right ears cannot form a team, please follow the following steps:
• Steps: turn on both earphones at the same time. The red and blue lights flicker alternately for about 5 seconds Move the left and right earphones to connect with each other, TWS team successfully. When the time to playpen the mobile phone bluetooth can be paired to search connection, after the successful pairing of the headset to use the project will not flash mode.
• Operation steps for the use of one earphone: take out any earphone from the charging warehouse and turn it on. The red and blue lights will flicker alternately. At this time, turn on the phone’s bluetooth to pair the search connection.
• Call voice assistant: after the headset is connected to the standby process, long press for 2 seconds to release the hand to wake up the voice assistant (SURI) function;
• Master-slave switching operation: after the TWS is connected, it can be used independently regardless of the main and secondary connections if one headset is without electricity or charging state, the normal use of the other headset will not be affected), and the two headphones can be used as the main sound channel alternately.
• Bluetooth reconnect operation: if the bluetooth and the phone have been paired successfully and the phone has not deleted the address code information (pairing name), the headset can be automatically reconnected by restarting the headset (or after the headset is plugged into the charging bin, it will automatically reconnect by unplugging the headset).
• Earpiece

1. Put the earphone in the charging compartment, and the earphone will display red light.The charging bin will display a blue light that is always on, indicating that the charging bin has electricity and the charging bin lamp of the headphone box will be off when the headset is charged.
2. When the blue light of the charging bin is lower than 1 grid, it means that the low electricity needs to be replenished for about 1 hour after the battery is fully charged, 4 blue lights will always be on;

Notes

1. Please do not drop, hit, scratch, twist, hit, crush or throw the bluetooth headset into the water.
2. When using a bluetooth headset, keep it away from the magnets, appliances and speakers;
3. Try to avoid placing the bluetooth headset in the extreme temperature (use the ambient operating temperature range of -10°C-45°C).
4. Avoid exposing the bluetooth headset to damp environment.
5. If you do not use the bluetooth headset for a long time, please charge it fully and charge it every other week to extend the service life of the headset;
6. Do not let the bluetooth headset near the fire source;
7. Please do not put the bluetooth headset and charging bin beside inflammable and explosive articles;
   Safety instructions: please use standard de charger (DC5v/ 300mA-IA) for charging the charging bin. Do not remove the charging bay and bluetooth headset. Or insert other items into the product to avoid damage or even injury to you.

Serious warning

Do not use this product while charging, please use the adapter designated by the manufacturer to charge the product.
Do not disassemble the lithium electronic battery and place it in the fire. Do not allow metal objects to touch or short-circuit the electrode.
Do not knock or squeeze the battery, avoid placing it in an environment of damp corrosion or overheating (>60°C).

Packing list

• Bluetooth headset 2pcs
• charging box 1pcs
• instruction manual 1pcs
• 1 charging cable

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>