CLOCKITY FJ3373 Wireless Weatherstation User Manual

CLOCKITY FJ3373 Wireless Weather station

Product Information

The product is a weather station with a wireless outdoor sensor that can display weather information such as weather forecast, barometric pressure, indoor and outdoor temperature, indoor and outdoor humidity, date, week, time, and moon phase. The product also has a snooze function and an alarm function that can be set manually. The comfort level of the indoor environment is calculated based on the indoor temperature and humidity, with a total of 5 levels. The current indoor temperature/humidity/barometric pressure and indoor temperature/humidity trend are displayed on the LCD
screen. After a successful connection with the outdoor sensor, the weather station can display the outdoor temperature/humidity and outdoor temperature/humidity trend.

Product Usage Instructions

1. First Installation: Press the button once to change the display calendar or second.
2. Manual Setting: To set the alarm time, press the ” ” button once to switch to the alarm activation mode. Press the button again to activate the alarm function. Use the ” or ” buttons to set the desired hour and minute. Press the button to confirm your setting. Use the ” or ” buttons to set the snooze minutes you need. Press the button to confirm your setting.
3. Alarm Function: The alarm will sound for 2 minutes if you do not turn it off by pressing any button. The alarm will automatically repeat after 24 hours. The rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times while the alarm signal is sounding. The snooze time range is 5 ~ 60MIN, OFF. If it is set to OFF, it means no snooze function. The snooze time unit is in minutes.
4. Moon Phases: The weather station has a display that automatically shows the current moon phase.
5. Comfort Display: The comfort level indoors is calculated based on the indoor temperature and humidity, with a total of 5 levels.
6. Display Information: The current indoor temperature/humidity/barometric pressure and indoor temperature/humidity trend are displayed on the LCD screen. After a successful connection with the outdoor sensor, the weather station can display the outdoor temperature/humidity and outdoor temperature/humidity trend.

Product structure

Explanation part-A (front)

• A1: Weather forecast
• A2: Air pressure
• A3: Outside temperature
• A4: Indoor temperature
• A5: Humidity outside
• A6: Indoor humidity
• A7: Date, week and time
• A8: Moon phase

Explanation part-B (back)

• B1: “SNOOZE/LIGHT” touch field
• B2: Keyboard
• B3: Battery Compartment
• B4: Support frame
• B5: Power connection

Explanation part-C (wireless outdoor sensor)

• C1: LCD Display – Temperature
• C2: LCD Display – Humidity
• C3: Send Signal LED
• C4: “°C/°F” button
• C5: “TX” Button
• C6: Battery Compartment

First installation

• Connect the weather station indoors with the supplied cable + adapter.
• Once the weather station is connected, all icons on the LCD screen will light up briefly for 3 seconds, you will hear a beep and the weather station will detect the indoor temperature & humidity.
• Take the wireless outdoor sensor and open the lid of the battery compartment, insert the 2 supplied ”AA” batteries into the outdoor sensor.
• Then install it outside in a desired location. Make sure that the sensor can receive sufficient information from the weather, do not place the sensor in front of an obstacle or where it cannot receive sunlight, etc. The sensor is IP44 splash-proof.
• The weather station now starts to connect to the outdoor sensor. This connection takes approximately 3 minutes and is indicated by a flashing reception RF antenna symbol on the “OUTDOOR” display area on the weather station.
• If the connection does not work, hold the ” ▼ ” button for 3 seconds and the weather station will reconnect to the sensor.

Manual setting

• Press the “ ” button once to change the display calendar or second.
• Press and hold the ” ” button for 2 seconds, the unit of temperature display starts flashing. Now use “ ▲ “ or “” ▼ ” button to set the temperature, the unit of temperature can be set to “°C” or “°F”.
• Press “ ” to confirm your setting, then the air pressure unit will start flashing. Now use the button “▲” or “” ▼ ” to set the unit of air pressure, the unit of air pressure can be set to “hPa” or “inHg”.
• Press “ ” to confirm your setting, the 12/24 hour display will now start flashing. Use the “▲ ” or ” ▼ ”’ buttons to set the correct 12/24 hour mode.
• Press “ ” to confirm your setting, the hour display will now start flashing. Now use the “▲ ” or ‘’ ▼ ” buttons to set the correct hour.
• Press “ ” to confirm your setting, the minute displays will start flashing. Use the “▲ ” or ”▼ ” buttons to set the correct minutes.
• Press the “ ” button to confirm your setting, the month and date icon will start flashing.
• Now use the “▲ ” or ” ▼ ” buttons to set the date display to Month/Date or Date/Month.
• Press the “ ” button to confirm your setting, the 2014 year display will start blink. Now use the “▲ ” or ” ▼ ” buttons to set the correct year.
• Press the “ ” button to confirm your setting, the month display will start flashing. Use the “▲ ” or ” ▼ ” buttons to set the correct month.
• Press the “ ” button to confirm your setting, the date display will start flashing. Use the“▲ ” or ” ▼ ” buttons to set the correct date.
• Press the “ ” button to confirm your setting, the language selection for the weekday displays will start flashing. Now use the “▲ ‘’ ‘’ ▼ ” buttons to select a language. Choice of: English, German, Italian, French, Spanish, Dutch and Danish.
• Press ‘’ ’’ to confirm your setting and to start the setting procedures, now proceed with the settings.

Set the daily alarms

• Press the ” ” button and display will be converted to alarm activation mode, in this mode, press the “ ” button again to activate the alarm function, which will display ”ON”, alarm icon display “ ” will display . Press the “ ” button to turn off the alarm, then the display shows “OFF” and the alarm icon “ ” is no longer displayed.
• Press and hold the “ ” button for 2 seconds of consumption until the hour display of the alarm time starts flashing. Use the “▲ ” or ”▼” buttons to set the automatic hour.
• Press the button to confirm, the alarm time minute display starts flashing. Use the “▲” or ”▼ ” buttons to set the minute.
• Press the “ ” button to confirm your setting, the alarm snooze time will start flashing. Use the “▲” or “▼” buttons to set the snooze minutes you need, they can also be turned off.
• Press the “ ” button to confirm your setting and use the setting procedure.

Alarm info

• The alarm will ring for a long time if you turn it off on 2 minutes to press. In this case, the alarm will be displayed automatically after 24 hours.
• Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times the alarm sounds.
• The snooze time setting range: 5~60MIN, OFF, when set to OFF, including no snooze function. The snooze time unit is in minutes.

Turn off the alarm and snooze function

• Press a button on behalf of the “ ” button and hold the button “ ” 2 seconds to stop the alarm.
• Touch the “ ” field or press the “ ” button, the alarm will sound to enter SNOOZE mode.
• In the button snooze mode, next to the ” button, press and hold the recorded “ ” key for 2 seconds to exit the snooze mode.

Moon phase
The weather station has a display that automatically shows the current moon phase.

Comfort display
The indoor comfort level is calculated based on the indoor temperature and humidity, there are 5 levels in total.

Display Temperature/Humidity/Barometric Pressure and Temperature/Humidity Trend

• The current indoor temperature/humidity/barometric pressure and the temperature/humidity trend (indoor) are displayed on the LCD screen.
• After successful connection with the outdoor sensor, the weather station can display the outdoor temperature/humidity and the temperature/humidity trend (outdoors)
• You may see the following displays:

Maximum/Minimum Temperature/Relative Humidity

• To toggle between indoor/outdoor maximum, minimum temperature and humidity data, press the “ MEMORY ” button:
  • One-time to display maximum temperature and humidity values.
  • Twice to display the minimum temperature and humidity values.
  • Three times to return to current temperature and humidity levels.
• To reset the maximum and minimum temperature and humidity, press and hold the “ MEMORY ” button for 2 seconds. This will reset all minimum and maximum recorded data to default.
• If the temperature reading is below the range, the LL.L will be displayed. If the temperature reading is above the range, the HH.H will be displayed.

Outdoor temperature alarm setting

• Press the “ ” button once to turn Alarm ON or OFF. The displayed icon “ ” means ON and when it disappears, the alarm is OFF.> Press and hold the “ ” button for 2 seconds until the Temperature warning icon starts flashing.
• The temperature alarm upper limit icon now starts flashing. Use the “▲” and “” ▼” buttons to set the desired maximum temperature. Press “ ” to confirm your setting.
• The icon of the lower limit of the temperature alarm starts flashing. Use the “▲” and “” ▼ ” buttons to set the required minimum temperature. Press the “ ” button to confirm your setting.

Temperature and frost warning

• Press the “ ” button to enable or disable the remote temperature warning. When the remote temperature alarm is activated, the icon will be displayed.
• When the temperature value of the external channel exceeds the set temperature range, the alarm will be activated, the weather station will give continuous alarm 5 times every minute, at the same time, the temperature alarm will flash with the alarm icon “ “, its temperature value and alarm upper limit icon “Hi ” or lower limit icon “Lo” will also flash.
• When the temperature of the outdoor sensor is –1°C (+30°F) to + 3°C (+37°F), the frost alarm is activated, the frost warning icon “ ” flashes.

Low battery
 When the battery icon “ ” appears, the batteries in the outdoor sensor should be replaced as soon as possible.

Weather forecasts

• The weather station calculates a weather forecast for approximately 12 hours station based on the bar printed pressure trend. Of course this forecast is not comparable to that of professional weather services supported by satellites and high performance computers, but only gives an indication of current developments.
• The weather station displays the following weather icon:

Adjust brightness

• Press the ” ” button to adjust the brightness. There is a choice of 4 different brightness options.
• When the brightness is not set to maximum, you can set it to maximum for 15 seconds by clicking the ” ” button. After 15 seconds, the weather station returns to its set brightness.

Safety
The product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the item in a safe way and understand the hazards involved. may arise.

• Children are not allowed to play with the product
• Cleaning and user maintenance shall not be made by children unless they are 8 years of age or older and supervised.
• Batteries can be life-threatening if swallowed. Therefore, keep the product and batteries out of the reach of small children. If a battery is swallowed, medical attention should be sought immediately.

Risk of battery leakage

• In case of battery leakage, remove it from the device immediately to avoid damage.
• Avoid contact with battery acid, rinse the affected area thoroughly with plenty of clean water and seek immediate medical attention.
• Only use batteries of the same type, do not mix used and new batteries.
• Avoid extreme environmental conditions and temperatures as these can damage the batteries. Eg. above radiators.
• Remove the batteries from the device if they have not been used for a long time.

Risk of equipment damage

• Use only the specified battery type.
• When inserting the battery, pay attention to the correct polarity. This is displayed in the battery compartment.
• Immediately remove empty batteries from the product.
• Do not make any changes to the article. Improperly performed repairs or changes can significantly endanger the user.

Important information

• The weather station works on both batteries or mains power. The outdoor sensor only works on batteries.
• Please read the user manual carefully before using the product
• Only use the device as intended in the user manual and use the device for its intended purpose.
• Never use compressed air, scouring pads, corrosive cleaning agents and/or aggressive liquids such as acetone and other agents to clean the device.

Declaration of Conformity
This product is manufactured in accordance with the harmonized European standards, you will find the declaration of conformity below:

• 2014/30/EU EMC Directive
• 2014/53/EU RED Directive
• 2011/65/EU RoHS Directive

The packaging is made from eco-friendly materials, which can be disposed of through your local recycling facility.

In the interest of protecting the environment, when your appliance has reached the end of its life, please do not throw it away in the household waste, but take it to a suitable center where it can be disposed of properly.

All batteries must be handed in at a collection point in your municipality, neighborhood or at the retailer. Such batteries can therefore be disposed of in an environmentally friendly manner.

Warranty and Support
For questions, assistance, support of warranty claims, please contact the seller.
Note : If you bought this product directly from Clockity, you will benefit of our after-sales service and warranty.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>