Bungee Adapter Installation Guide
- June 10, 2024
- Bungee
Table of Contents
Bungee Adapter
Bungee Adapter installation
Works on both the 1″ and ¾” straps
- A good starting place is the first hole on the collar strap. Insert one of the three screws in the hole, and thread it into the larger green holder nut with the supplied Allen wrench.
- Slide the bungee cord under the large green holder.
- Insert and tighten the second screw into the second hole of the large green holder.
- Skip six holes, on the seventh hole insert the screw. With the collar strap bent in a loop like a picture below, insert the two metal ends of the bungee cord on the stud.
- Lastly, thread the smaller green holder onto the stud, and use the Allen wrench to tighten it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>