KRYPTONITE 1518 Key Cable User Guide
- June 10, 2024
- KRYPTONITE
Table of Contents
KRYPTONITE 1518 Key Cable
1018, 1218, 1230, 1265, 1565, 1518
Key Cable
437 street Canton. MA 02021 (781)
BRACKET INSTALLATION
PROPER BICYCLE LOCK UP
Place the against an anchored statimary o*ct. Place the Kryptonite cable the
stationary object and through the bike frame Remove key. Check the lock before
leaving the bike to be sure it is properly secured. Whenever possible. capture
the anchored stationary object, the frame. and rear wheel within the cable.
Cable locks are deterrent security only. For additional, high security proper
lock-up information, please visit
www.kryptonitelock.com.
Tips :
- Always a vehicle in a well-lit area with high foot
- Always lock a vehicle to a solid object that the vehicle can rot lifted over.
- Make sure the object that the vehicle is locked to cannot cut
- Where always make sure the vehicle frame and wheels are secure.
- Lock according to the value of the vehicle — frame. back wheel, front wheel.
- Get the tightest fit possible! The less inside the or chain the better as it makes it diffcult for thieves to use their tools.
- position soundeth keyhole facing dawn.
KEY SAFE – FREE KEY REGISTRATION AND KEY REPLACEMENT PROGRAM:
For as long as the customer owns the Kryptonite lock. if keys are lost and the
key number has been registered with Kryptonite, Kryptonite will send the first
pair of standard replacement keys for FREE. TO register keys, complete the
form on Kryptonite’s website:
Kryptonitelock.com>CustomerService>Registerkeys/combination.
CARE & MAINTENANCE
Lubricate the lock several times a year to keep the lock In its best working
condition. Always use a lubricant that has only a silicone, graphite or Teflon
base. Face the lock cylinder upright and spray or pour the lubricant into the
cylinder. Let it sit for 5 minutes. Place a rag on the workstation and turn
the lock over onto the rag for a few minutes.
Note: Do not use WD-40! WD-40 is a solvent, not a lubricant and will
remove lubricant in the cylinder.
LIGHTED KEY:
If the lock comes With a lighted key: TO CHANGE THE BATTERIES: Remove both
screws and lift off key cover and replace the batteries (two I Sv lithium
batteries (AGI O. 389, 189, LRI 130 or LR54) with the’+’facing up. Make sure
the contact spring Is properly fitted into the underside of the button and
replace both key cover screws. TO REMOVE AND/OR REPLACE THE KEY BLADE FROM THE
LED CASE: Turn the I FD case over to the backside and unscrew the 2 screws.
Hold LED case in one hand, then pull upwards on the key ring of the Key Blade
to completely remove it. TO REINSERT A NEW KEY BLADE INTO THE LED CASE: Slide
the Key Blade into the opening of LED case until pu hear a click. Be sure the
stamp key code area is facing you. Insert the screws and tighten clockwise.
LIFETIME LIMITED PRODUCT WARRANTY
LLC. through its division CKryptoniteO extends a limit Efetime warranty to the original owner of manufactured by Kryptonite (the def«ts in material and This warranty to the Original user of This warranty is not transferable. This warranty pu legal rights. and may also have other rights. which vary from to For complete warranty information please visit Kryptonite’s website at www.kryptonitem.com or call Kryptonite at (USA only) or 781-828-6655. To contact Kryptonite, or call 1 (USA only) or 1 781-828-665s
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>