Jabra 510 Portable Bluetooth Speakerphone User Manual

Jabra 510 Portable Bluetooth Speakerphone

Jabra Speak 510

The Jabra Speak 510 is a portable speakerphone that allows you to answer, end, reject and mute calls. It can be connected to your PC via USB or Jabra Link 360, and wirelessly to your mobile device via Bluetooth. The speaker features an omni-directional microphone and wideband audio for exceptional sound quality. LED, audio indicators and voice guidance are also included.

Speaker Overview

• Mute microphone
• Bluetooth
• Battery level
• Volume down
• Answer call
• On/Off
• Volume up
• End/reject call
• Headset port
• USB cable
• Supplied with Jabra Speak 510+ only – Jabra Link 360

Turning on the Jabra Speak 510
To turn on the Jabra Speak 510, either plug the USB cable into any available USB port on your PC or press and hold (2 secs) the On/Off button. The same button can be used to turn the speaker off.

Charging the Jabra Speak 510
To charge the battery, plug the USB cable into any available USB port on your PC. The battery light will turn red when charging and green for 1 minute when fully charged.

Connecting the Jabra Speak 510
To connect the Jabra Speak 510, plug the USB cable into any available USB port on your PC and select the Jabra Speak 510 as the default audio device in Windows Control Panel sound settings and in your softphone audio settings.

Connecting to Jabra Link 360
To connect the speakerphone and Jabra Link 360, press and hold (2 secs) the Bluetooth button on the Jabra Speak 510 until the Bluetooth light flashes blue. Release the button when you hear the connection instructions. Plug the Jabra Link 360 into any available USB port on your PC. The connection is established when the light turns solid blue. Note: Ensure that all Bluetooth devices previously connected to the Jabra Link 360 are switched off.

Connecting to Mobile Device (Bluetooth)
To connect to your mobile device via Bluetooth, press and hold (2 secs) the Bluetooth button on the Jabra Speak 510 until the Bluetooth light flashes blue. Release the button when you hear the connection instructions. Enable Bluetooth on your mobile device and select the Jabra Speak 510 from the list of available Bluetooth devices. If prompted for a password, enter 0000.

WELCOME:v Thank you for purchasing the Jabra Speak 510. We hope you will enjoy it!

JABRA SPEAK 510 FEATURES

• Answer, end, reject and mute calls.
• Connect to PC via USB or Jabra Link 360.
• Connect wirelessly to mobile device via Bluetooth.
• Portable.
• Omni-directional microphone.
• Wideband audio for exceptional sound quality.
• LED, audio indicators and voice guidance.

SPEAKER OVERVIEW

TURN ON THE JABRA SPEAK 510

• Plug the Jabra Speak 510 USB cable into any available USB port on your PC, or
• Press and hold (2 secs) the On/Off button to turn the Jabra Speak 510 on or off.

CHARGING THE JABRA SPEAK 510

Plug the Jabra Speak 510 USB cable into any available USB port on your PC to charge the battery. The battery light is red when charging, and green for 1 minute when fully charged.

CONNECTING

1. Plug the Jabra Speak 510 USB cable into any available USB port on your PC.
2. Select the Jabra Speak 510 as the default audio device in Windows Control Panel sound settings, and in your softphone audio settings.

CONNECT TO JABRA LINK 360

The speakerphone and Jabra Link 360 are pre-paired and ready to use out of the box (Jabra speak 510+ only).

TO CONNECT THE SPEAKER AND JABRA LINK 360:

1. Press and hold (2 secs) the Bluetooth button on the Jabra Speak 510 until the Bluetooth light flashes blue. Release the button when you hear the connection instructions.
2. Plug the Jabra Link 360 into any available USB port on your PC.
3. The connection is established when the light turns solid blue.
   NOTE : Ensure that all Bluetooth devices previously connected to the Jabra Link 360 are switched off.

CONNECT TO MOBILE DEVICE

( BLUETOOTH )

1. Press and hold (2 secs) the Bluetooth button on the Jabra Speak 510 until the Bluetooth light flashes blue. Release the button when you hear the connection instructions.
2. Enable Bluetooth on your mobile device, and select the Jabra Speak 510 from the list of available Bluetooth devices. If prompted for a password enter 0000.

CONNECT TO BLUETOOTH HEADSET
For privacy, a bluetooth headset can be connected to the Jabra Speak 510.

1. Plug the Jabra Speak 510 into any available USB port on your PC.
2. Put the Bluetooth headset into pairing mode (refer to your headset manual for instructions).
3. Press and hold (8 secs) the Bluetooth button on the Jabra Speak 510 until the Bluetooth light flashes blue and then flashes green. Release the button when you hear ‘Connect to headset’.
4. The connection is established when the light turns solid blue.

CONNECT TO CORDED HEADSET

For privacy, a corded headset can be plugged into the Jabra Speak 510 headset port.

HOW TO USE THE JABRA SPEAK 510

MULTIPLE CALL HANDLING
The Jabra Speak 510 can accept and handle multiple calls simultaneously. SWITCH BETWEEN BLUETOOTH DEVICES

1. Press and hold the Bluetooth button and tap the Volume up or Volume down button to cycle between the connected devices. The connected devices will be announced.
2. Release the Bluetooth button when the correct device is announced. The Jabra Speak 510 will establish a connection with the device(s). When a connection has been established the device(s) will be announced.

VOICE GUIDANCE ON/OFF
To turn voice guidance on/off, press and hold (8 secs) the Mute button until you hear ‘Voice guidance off’ or ‘Voice guidance on’.
NOTE : Not all voice prompts will be disabled when voice guidance is turned off.

VOICE GUIDANCE

SOFTWARE

JABRA DIRECT
Jabra Direct is software designed to support, manage and enable optimal functionality for Jabra devices. It is highly recommended to download and install Jabra Direct. Download the latest version – jabra.com/direct

UPDATE JABRA SPEAK 510 FIRMWARE

Firmware updates improve performance or add new functionality to Jabra devices.

TO UPDATE FIRMWARE:

1. Connect to a PC via USB.
2. Download and install Jabra Direct.
3. Check for the latest firmware via Jabra Direct.You will receive notifications whenever there is an update for your device.

SUPPORT

FAQ

1. Q I hear crackling noises
   A: Bluetooth is a radio technology that is sensitive to objects between the Jabra Speak 510 and the connected device. Ensure the Jabra Speak 510 and the connected device are within range (up to 100 meters or 300 feet).

2. Q I cannot hear anything
   A – Increase the speaker volume. – Ensure that the Jabra Speak 510 is connected to a device.

3. Q I am having Bluetooth connection problems
   A:  Check your mobile device’s Bluetooth menu and delete/forget the Jabra Speak 510. Re-connect the Jabra Speak 510 to your Bluetooth device following the Bluetooth connection instructions.

4. Q Will the Jabra Speak 510 support other Bluetooth equipment?
   A: The Jabra Speak 510 is designed to work with Bluetooth mobile devices. It can also support other Blue-tooth devices that can support a headset, hands-free and/or advance audio distribution profile (A2DP).

HOW TO CARE FOR YOUR JABRA SPEAK 510

• Always store the Jabra Speak 510 with the power off and safely protected.
• Avoid storage at extreme temperatures (above 70°C/158°F or below -40°C/-40°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance.
• Do not expose the Jabra Speak 510 to rain or other liquids.

TECHNICAL SPECIFICATIONS

www.jabra.com/speak510

References

• Wireless Headsets and Headphones for Office, Music & Sport | Jabra
• Bluetooth & USB Speakerphone for remote workers | Jabra Speak 510

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>