i-PRO WV-QDC102C Dome Cover Instruction Manual
- June 10, 2024
- i-PRO
Table of Contents
i-PRO WV-QDC102C Dome Cover
Product Information
The product being referred to in the user manual is a camera manufactured by i-PRO Co., Ltd. The manual provides a warning that the company is not responsible for any injuries or property damage resulting from improper installation or operation inconsistent with the documentation. The manual also provides a reference to the company’s technical information website, where users can find more information and guidance related to the product.
Product Usage Instructions
The following steps outline how to remove the hooks from the top of the camera:
- Push the top of the front part downward at an angle from the top of the camera.
- Remove the hooks in order from the top.
- Remove forward.
It is important to follow these steps carefully to avoid damaging the camera and to ensure proper removal of the hooks.
- Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use.
- The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product.
- Read also the installation guide of the camera to be used.
i-PRO Co., Ltd. assumes no responsibility for injures or property damage resulting from failures arising out of improper installation or operation inconsisntent with this documentation. “<Control No.: C****>” used in these documents should be used to search for information on our technical information website (https://i-pro.com/global/en/surveillance/training- support/support/technical-information) and will guide you to the right information
Preface
This product is the clear type dome cover. The latest information about the
supported cameras
- Do not use this product except with suitable cameras. Failure to observe this may cause a drop resulting in injury or accidents.
- Refer installation work or dome cover replacement to the dealer. Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer.
- The screws and bolts must be tightened to the specified torque.
Failure to observe this may cause a drop resulting in injury or accidents. When using this product, also read the “Precautions” described in the operating instructions for the camera to be attached.
Specifications
- Ambient operating temperature : –30 °C to +50 °C {–22 °F to +122 °F}
- Dimensions : 48 mm (W) × 103.5 mm (H) × 47 mm (D) {1-7/8 inches (W) × 4-1/16 inches (H) × 1-27/32 inches (D)}
- Mass.: Approx. 10 g {0.02 lbs.}
- Finish : Acrylic resin, Clear
Standard Accessories
Operating Instructions (this document)
Note:
The front part is secured with hooks. Push the top of the front part downward
at an angle from the top of the camera, remove the hooks in order from the
top, and remove forward
Note:
- When replacing the dome cover part, be careful not to touch the surface directly.
- After replacing the dome cover, attach the protective sheet again
- Attach the protective sheet to the dome cover for the installation work hereafter
QR CODE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>