LIFE 516980073 Godiva Ceiling Fan User Manual

LIFE 516980073 Godiva Ceiling Fan

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS.
Read the operating instructions carefully before putting the appliance into operation and keep the instructions, the receipt and, if possible, the box with the internal packing. If you give this device to other people, please also pass on the operating instructions.

USER MANUAL SYMBOLS
Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the machine:

• WARNING: This sign warns you of dangers to your health and indicates possible injury risks.
• CAUTION: This sign refers to possible hazards to the machine or other objects.
• NOTE : This sign highlights tips and information

SAFETY INSTRUCTIONS

1. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

2. Children should not play with the appliance.

3. Cleaning and maintenance of the appliance must not be done by children without supervision.

4. Use the fan only for purposes described in the instruction manual.

5. The appliance is intended exclusively for private, domestic use and for the intended purpose. This appliance is not suitable for professional use.

6. Do not use the appliance outdoors.

7. WARNING: The electrical connection and installation of the ceiling fan must be done by a certified and specialized electrician and always in accordance with national regulations for electrical installations.

8. CAUTION: Before installing the ceiling fan, turn off the power to the main panel. Disconnect the fan from the power supply before installing or repairing it.

9. CAUTION: The fan must be grounded.

10. Make sure the power cord is properly grounded to avoid the risk of electric shock.

11. The fan must be installed in such a way that the blades are at a height of more than 2.30 meters from the floor.

12. During installation, make sure that there is a distance of at least 15cm. from the edge of the fins to the wall and from any other object. Keep in mind that the longer this distance, the better the air flow from your fan.

13. The support hook must be able to support the weight of the fan in motion and a weight of at least 30 kg to ensure proper placement.

14. Do not connect the fan to a dimmer switch. This can cause engine noise
    (even damage) and poor performance of the appliance.

15. It is not recommended to operate the ceiling fan and gas appliances in the same room at the same time.

16. Before turning on the fan, make sure all connections are stable and secure.

17. WARNING: Due to the natural movement of the fan, some connections may loosen. Check support joints, brackets and blade fittings twice a year to make sure they are secure.

18. Keep the appliance away from heat sources, direct sunlight, moisture
    (never immerse it in any liquid) and sharp edges.

19. Do not use the appliance near bathtubs, showers, sinks, swimming pools, etc. where it may get wet or come into contact with water.

20. To protect against electrical shock, do not immerse the fan, plug or cord in water or any other liquid or spray with liquids.

21. Unplug from the electrical outlet when not in use, when moving the fan from one location to another, before putting on or taking off parts and before cleaning.

22. Do not operate the appliance without supervision. If you leave the room, you should always turn off the appliance.

23. CAUTION: Never attempt to stop the fan blades when operating.

24. CAUTION: To avoid injury, do not place or insert any object into the fan blades when the appliance is connected to the power supply or when it is in operation. Avoid contact with any moving part.

25. CAUTION: Do not place clothes or other objects on the fan.

26. CAUTION: Do not use the appliance near curtains.

27. Periodically check the appliance and its cable for any damage.

28. WARNING: Do not use the appliance if it has been damaged in any way or if there are any visible signs of damage to the appliance. To avoid possible danger, do not attempt to repair the device yourself. Contact a qualified technician for repair. Use only original spare parts.

29. Do not attempt to repair the appliance yourself. Always contact an authorized technician.

30. WARNING: Use only original spare parts. The use of accessories not recommended or sold by the manufacturer of the device may cause hazards.

31. Do not use the appliance if its surface is cracked.

32. Do not operate any appliance, with a damaged cord plug after the appliance malfunctions, or has been dropped damaged in any manner.

33. If the power cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

34. Do not use the appliance unless all its parts are fully assembled.

35. Do not use or store the appliance in places where there are flammable materials and gases, or in an environment with a lot of dust, air or steam.

36. Do not use the appliance near an open flame or other heating device.

37. WARNING: Do not use the appliance in the presence of potentially explosive or flammable liquids or gases.

38. CAUTION: Keep the appliance away from children and pets.

39. Children should be supervised to ensure that they do not play with the appliance. In order to ensure your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
    CAUTION: Do not allow small children to play with the foil. There is a danger of suffocation!
    Your fan may make a slight noise at low speed. This is not a malfunction of the appliance or a defect because it is electrical noise caused by a power

BATTERY SAFETY INSTRUCTIONS OF REMOTE CONTROL

1. Different types of batteries or new and used batteries should not be used together.
2. WARNING: Remove the batteries if the remote control is not used for a long time to prevent battery leakage.
3. Do not expose the remote control to direct sunlight.
4. Always ensure that the battery compartment cover is properly closed.
5. CAUTION: Do not attempt to charge expired batteries or non­rechargeable batteries. Buy new rechargeable batteries.
6. CAUTION: Never dispose batteries in a fire. Danger of explosion and fire!

PARTS IDENTIFICATION

1. Mounting plate
2. Screw
3. Upper canopy
4. Down rod
5. Decorative cover
6. Security bolt
7. R lock
8. Screw
9. Blade
10. Motor
11. Blade mounting screw
12. Mounting screw
13. LED light
14. Lampshade cover

REMOTE CONTROL

1. Medium air fan speed selection key
2. Low air fan speed selection key
3. High air fan speed selection key
4. Fan ON / OFF button
5. LED light ON/ OFF button/ change color temperature
6. Timer activation key (1 hour)
7. Timer activation key (2 hours)
8. Timer activation key (4 hours)
9. Timer activation key (8 hours)
10. Light indicator

CEILING FAN INSTALLATION
WARNING: The electrical connection and installation of the ceiling fan must be done by a certified and specialized electrician and always in accordance with national regulations for electrical installations.

1. Remove all packing materials and keep them away from babies and children. The following are included in the package:

2. Place the mounting plate in a suitable place on the ceiling (following safety instructions) and secure it with the supplied screws.
   NOTE: The mounting screws included in the package are intended for concrete wall. For constructions from other material, e.g. wooden constructions, the appropriate type of screw should be used.

3. Remove by unscrewing the arched metal parts above the round plate and place them on the blades securing them with 2 screws on the two ends of each arch.

4. Secure the blades to the motor body using 2 mounting screws for each blade: Unscrew the blade retainer screws located on the motor body. Place each blade in place (on the opposite side to where you placed the metal arcs in the previous step) and align the holes in the fins with the holes on the motor body. Then carefully tighten the 2 screws of each blade until you are sure that the blades are secured on the motor body and there is no risk of them coming out of position during the operation of the appliance.

5. Then pass the wires through the round plate hole, apply the round plate onto the motor body aligning the plate holes with the motor holes and secure with the 3 screws.

6. Unscrew the screws on the lamp bracket (which are used to attach the lamp to the motor) and then connect the motor power wires to the LED lamp wire. Then place the three screws you removed in the corresponding holes and screw them until the lamp is secured on the base.

7. Choose whether to use the small or large support arm. Remove the support pin and lock R from the arm. Route the bracket through the top cover and protective cover, then route the power cables through the bracket.

8. Loosen the two screws of the motor support shaft, Then lower the arm with the desired length down into the hole of the motor support shaft, insert the support pin and secure with the lock R and. tightening with the 2 screws until it locks into place. Lower the decorative cover to hide the screws.

9. Hang the ball joint and the fan on the mounting plate. Make sure that the guide pin of the down rod is inserted into the socket of the ball joint.

10. Connect the motor cables to the remote control receiver and the power supply as shown in the picture below.

    • Neutral – N (Blue cable)
    • Motor (phase) – L (Brown cable)
    • Lamp (phase) – L (Black cable)During connection of the wires, securely connect the copper wires of each cable and connect the terminal to the cable.
      Be careful to ensure that all the wires of the cable are properly inserted into the terminal and that no bare copper protrudes from the terminal, to avoid the possibility of short circuit and electric shock.

11. Insert the remote control receiver between the bracket and the ball joint, as shown in the following picture.

12. Loosen two screws on the mounting bracket and install the upper canopy in such a way that the loose screws go from the largest to the smallest holes in the mounting bracket. Tighten the two loose screws to secure the upper canopy in place.

13. Place the lamp cover onto the lamp holder by turning it clockwise to lock it into place. NOTE: If during operation, the fan seems to shake, double-sided tape a balance pad to a blade and test. If the shaking persists, try the same procedure with the remaining blades.

USE OF REMOTE CONTROL

1. Use the remote control to set the fan speed and switch the light and the fan on/off, and to set the desired operating time.
2. Open the battery compartment cover on the remote control and insert 2x AAA batteries following the correct polarity. (Batteries are not included in the package).
3. Reassemble the battery compartment cover.
4. Mark the infrared sensor with the remote control and press the desired key for the corresponding function.
   NOTE: If you do not use the appliance for a long time, remove the battery from the remote control to prevent leakage of battery fluid.

USING THE APPLIANCE

1. Select the rotation speed of the fan by pressing the speed button on the remote control. The fan has 3 available operating speeds:
   • High speed
   • Medium speed
   • Low speed
2. You can switch the light on / off by pressing the corresponding key on the remote control.
3. Select the desired light level and color temperature by pressing the LIGHT button on the remote control. Press once for 3000K color temperature, twice for 4000K color temperature and three times for 6000K color temperature.
   TIMER
   The timer can be set for a certain period of time (1H, 2H, 4H, 8H).
   Press the timer button to set the desired operating time.

CLEANING AND MAINTENANCE
Follow the instructions to safely take care of the appliance.

1. Always make sure that the appliance is unplugged before cleaning it.
2. Wipe the body of the device with a soft damp cloth and wipe well to dry.
3. Be careful not to let the cord and the appliance come into contact with water.
4. Do not use anything abrasive that can scratch or damage the appliance. Do not use a wire brush or other abrasive utensils for cleaning. Do not use chemical solvents (such as benzene, alcohol or gasoline) as they may cause irreversible damage to the unit.

STORAGE

1. Always unplug the appliance before storing it.
2. The appliance should be disassembled before storing.
3. Always store the appliance in a well-ventilated, humid, safe and clean place. For the better protection of the appliance, store it in its original packaging.

Ionias Kalochori, 570 09 Thessaloniki, Greece,
TEL. +30 2310 700.777
e-mail: info@sun.gr –
www.life.gr

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>