QIZHOU BTL Wireless Headphone Instructions
- June 10, 2024
- QIZHOU
Table of Contents
QIZHOU BTL Wireless Headphone
Product Information
The Wireless Headphone is a product that allows you to listen to audio wirelessly. It has a Bluetooth version of JL 5.2 and operates with an impedance driver unit. The frequency band is within the range of 2.402GHz-2.480GHz, and the frequency range is 20Hz-20kHz. The battery name is not specified, but it uses a battery model with a rating that is not mentioned. The transmission range of the headphones is not specified, and it takes a charging time that is not mentioned. The charging mode and charging current are not specified, but the continuous service time is not defined, and it has a standby time. The maximum volume of the headphones is not mentioned.
Product Usage Instructions
- Long press the button to power on the headphones.
- Choose Pair Name: BT-UNICORN to connect your device with the headphones.
- Make sure to read the manual carefully before using the product and keep it properly.
- Do not let children under three years old use the headphone due to choking hazards from small parts.
WIRELESS HEADPHONE
ATTENTION: PLEASE READ THIS MANUAL CAREFULLY BEFORE USING THE PRODUCT AND KEEP IT PROPERLY.
BUTTON INTRODUCTION
-
Push button: Control the light. There will be a voice prompt when turning on or off the light.
-
Press button:
A. When playing music: Press the function once to stop/play; Press twice in a row to the previous song; Press three times in a row to the next song B. When the call comes, Press the function once to answer/end. -
Microphone: Automatically turn on after connection
-
Audio port: Connect the headphone to your device with the given audio cable.(Headphones will automatically turn off wireless connection and Microphone if use this audio port.).
-
Charging port.
-
Reminder light: Red light flashes Intermittently when not paring when connecting successfully reminder light will turn off; The Reminder light flashes a blue light when charging, Reminder light will turn off when fully charging.
Battery below 10%, audio reminder: Battery is running low When charging, the Bluetooth function can be used normally, but it is not recommended to use the Bluetooth function during charging, otherwise it may cause the device to heat up.
WAY OF USE
Long press ＂ O＂ to power on the headphones and then choose Pair Name: BT-
UNICORN to connect your device to the headphones.
PARAMETER
| PRODUCT NAME | WIRELESS HEADPHONE |
|---|---|
| WIRELESS VERSION | JL 5.2 |
| IMPEDANCE | 32±15% Ω/ 1KHz |
| DRIVER UNIT | 40MM |
| Working temperature | -0 ℃ to +35 ℃ |
| FREQUENCY BAND | 2.4GHZ |
| FREQUENCY RANGE | 20HZ ~20KHZ |
| BATTERY NAME | Lithium-ion battery |
| BATTERY MODEL | 902030 |
| BATTERY RATING | **Nominal Voltage:3.7V Rated Capacity:500mAH ,1.85Wh |
Weight:0.0093kg
TRANSMISSION RANGE| ≤ 10M
CHARGING TIME| 1.5~2.5H
CHARGING MODE| MICRO USB 5V
CHARGING CURRENT| 450MA
CONTINUOUS SERVICE TIME| 20- 25H
STANDBY TIME| > 2 MONTHS(POWER OFF STATE)
MAX VOLUME| ≤ 95DB**
PACKING LIST
- 1pcs WIRELESS HEADPHONE
- 1pcs INSTRUCTION SHEET
- 1pcs USB CHARGING CABLE
- 1pcs 3.5mm AUDIO CABLE
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device and its antenna(s) must not be co-located or operated in
conjunction with any other antenna or transmitter. RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
WARNING
- PLEASE STORE AND USE THE PRODUCT AT ROOM TEMPERATURE.
- DO NOT EXPOSE THE PRODUCT TO RAIN OR HUMIDITY.
- DO NOT THROW, TO AVOID PRODUCT DAMAGE DUE TO DROP.
- DO NOT DISASSEMBLE, REPAIR OR MODIFY THE PRODUCT BY YOURSELF.
- DO NOT WIPE THIS PRODUCT WITH CHEMICAL SOLVENT.
- DO NOT THROW AWAY OR SET FIRE TO AVOID DANGER.
- WARNING: To avoid the danger of suffocation, keep the plastic bag away from children and babies, Do not use this bag in cribs, beds, carriages, or playpens,The plastic bag could block the nose and mouth and prevent breathing, This bag is not a toy
- This good is a lithium-ion/polymer cell, contained in equipment. The Watt-hour rating is 1.85 Wh. Each battery is of a type proved to meet the requirements of each test in the UN MANUAL OF TEST AND CRITERIA, Part III,sub-section 38.3, Each package is marked with a lithium battery mark. According to IATA DGR, lithium-ion batteries are in compliance with Section II of PI 967.
WARNING – California Proposition 65 NONE WARNING CHOKING HAZARD -Small parts Not for Children under 3 years old.
