MARSHYDRO FC-E Series LED Grow Light Medical Lamp User Manual

MARSHYDRO FC-E Series LED Grow Light Medical Lamp User Manual

FC-E3000

Weight: 11.7LB 5.3KG
Dimensions: 23.723.83.1IN 60.260.47.9CM
Power: 300W±5%
Voltage: 100-277Vac
Frequency: 50/60Hz
PPE: 2.8pmol/j
PPF: 896umo1/S

FC-E4800

Weight: 20.1LB 9.1KG
Dimensions: 33.633.53.11N 85.385.27.9CM
Power: 480W±5/0
Voltage: 100-277Vac
Frequency: 50/60Hz
PPE: 2.8pmol/j
PPF: 1344umol/S

FC-E6500

Weight: 23.6LB 10.7KG
Dimensions: 45.345.33.11N 115.1115.17.9CV
Power: 730W±5%
Voltage: 100-277Vac
Frequency: 50/60Hz
PPE: 2.8pmol/i
PPF: 2044umo1/S

FC-E8000

Weight: 26.5LB 12KG
Dimensions: 45.745.33.21N 116.2115.18.1CIV
Power: 800W±5%
Voltage: 100-277Vac
Frequency: 50/60Hz
PPE: 2.8pmol/j
PPF: 2240umol/S

FC-E1000W

Weight: 33.1LB 15KG
Dimensions: 67.345.32.95 IN 171115.17.5CM
Power: 1000W±5%
Voltage: 100-277Vac
Frequency: 50/60Hz
PPE: 2.8pmol/j
PPF: 2810umol/S

FC-E SERIES ACCESSORIES

ASSEMBLY INSTRUCTIONS

1. Please follow the steps in the instruction manual to assemble the light and do not change it without authorization. Any improper installation step may cause personal injury or property loss.
2. Please install the light in a suitable location, use standard accessories to hang the light, fix it to prevent it from falling, and make sure there are no flammable and explosive items within 0.5 meters.
3. Please note that the safety and stability of the operating site is the premise of light maintenance and repair.
4. Please make sure the tight connections of all the parts before using

Assembly

1. Install (1)Eyes Bolts and (2)End Caps to the support bars. The joint end should be placed on one side.
   

2. Fasten the light bars with ©Thumb Screws. (Recommended to fix on the green anchors provided)
   

3. Attach the adjustable (4)Snap-in Brackets to the Driver and secure it with (5)Plastic Nuts. Connect the (6)All-in-one Cable to the Light Bar (7)Joints and screw them tightly .Tighten the (6)Waterproof Connector
   

4. Snap the Dryer on the Light Bars; or Hang it Up with ©Steel Hook (FC-E6500/FC-E8000/FC-E1000W only)
   

HOW TO EXTEND FC—El 000W TO CORE COVERAGE 4X6?

1. Adding extension light bar. (Left and Right side both are available)
   

2. Puting the screws in the holes then assemble light bar.

3. Using an alien key to tighten the nut.
   

Dimming Operation

DAISY CHAIN OPERATION

1. Connect Multiple Lights with Dimming Cable (Up to 60S FC-E3000 Can be Daisy-Chained,FC-E4800,FC-E6500,FC-E8000,FC-E1000W Support Up to 60 Lights)
   

2. Choose one as main-light, others as sub-lights (eg: A is main-light,B&C are sub-lights)
   

3. Turn A’s dimmer switch to DIM, and turn others’ to EXT

4. The intensity of all lights stay the same with A

5. Control the intensity of all lights through the dimmer knob of A
   

Cautions

1. For daisy chain operation, the total power cannot exceed the rated power of your timer.
2. Voltage application range 120V–277V, please use under rated voltage.
3. For FC-E3000/FC-E4800/FC-E6500/FC-E8000/FC-E1000W: when connected to 5-15P polarized plug, input voltage is 120V, 60Hz; when connected to 6-15P polarized plug, input voltage is 240V, 60Hz; when connected to 7-15P polarized plug, input voltage is 277V, 60Hz.
4. Do not touch the light panel when it is working.
5. Wear protective glasses when look at the light directly.
6. Do not use a damaged power cord in case of fire or electric shock.
7. Unplug power cord in rainy days to prevent lightning strikes.
8. Please unplug the light when cleaning and repairing.
9. The light belongs to class I protective equipment, so the light must be well grounded.
10. The power supply should be connected by professionals.
11. Do not disassemble, repair or refit the light without authorization of the manufacturer or non-professionals.
12. The maximum operating temperature is 40 °C. Do not operate the light above this temperature;
13. Do not connect the light with other dimming devices without permission.

Want to know more details?
Please visit our official website: www.mars-hydro.com
All eligible MARS HYDRO products carry a 30-day satisfaction guarantee from the day the product is received.
All returned products must be in the orgional packaging along with all components and accessories, without man-made damage and can’t affect the second sale.

Within 1 year:
FREE components, repairing and shipping.

1 year- 5 year:
Buyer pay the 2 way shipping fees and repairing fees.

W: www.mars-hydro.com
E: [email protected]
T: 1 626 587 8506(US No.)
A: JinTie Industrial Park, LongGang District, ShenZhen,518100,China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>