KID TRax KT1604 Classic Pedal Car Owner’s Manual

June 10, 2024
KID TRax

KID TRax logo

KID TRax KT1604 Classic Pedal Car

WARNING
This manual contains important safety and use information.
Keep this manual for future reference.

  • An adult must read this entire manual
  • Adult supervision is required at all times

Safety

WARNING

FAILURE TO FOLLOW THE SAFETY INSTRUCTIONS LISTED BELOW MAY RESULT IN SERIOUS INJURY OR DEATH.

The owner’s manual contains assembly, use and maintenance instructions.

Child Safety Warnings

  • Adults supervising children must read and understand this entire manual before allowing any child to use this product.
  • Adults must evaluate their own children as to maturity, strength, judgment and ability to follow safety rules. Published age guidelines are not a substitute for careful evaluation of your own child.
  • Adults must teach children about thinking ahead while riding as this may be the first time a child has ever controlled a ride-on toy. While you supervise, see through the child’s eyes, and verbally teach them about steering and avoiding obstacles in the approved riding area.
  • Riding a ride-on toy can be a dangerous activity, even under the best of circumstances. Good choices regarding where and when to ride, constant adult supervision of riding, and practice and careful riding by the child can all help to minimize risk. However this ride-on toy is intended to move and therefore it is possible for the rider to lose control, fall off and/or get into dangerous situations that no amount of care, instruction or expertise can eliminate.
  • If this inherent risk is not acceptable, adults should not allow children to ride this ride-on toy.

Safe Riding Warnings

  • Not to be used by children under three (3) years of age.
  • Do not exceed the maximum weight capacity of 60 lbs. (27 kg)
  • Do not allow more than one (1) rider.

ADULTS AND SUPERVISORS, PLEASE NOTE:

  1. Always instruct all children of common sense rules and safe practices.

  2. Be aware that flat, hard surfaces provide the safest experience for child riders.

  3. Do not allow the child rider to operate the ride-on toy near streets, roads, sidewalks, walkways, or any other place where they may encounter other moving vehicles.

  4. Never leave children unattended with this ride-on toy. Continuous adult supervision is required.

  5. If necessary, adults and supervisors are always responsible for setting up gates and barriers to ensure a safe riding environment for the child rider.

  6. Be aware that this ride-on toy does not have braking capabilities. Allowing use of this ride-on toy in areas that require braking may cause rolls, crashes, serious injury, or death to the child rider.

  7. Teach children not to allow other children to use this ride-on toy. Communicate this message to other adults and supervisors of fellow children with which your
    child interacts.

  8. Sternly alert children that hands, legs, hair, and clothing can potentially get caught in moving parts. Ensure they never place a body part or piece of clothing near a moving part of the ride-on toy. Avoid loose clothing.

  9. Instruct children to always wear shoes when using the ride-on toy.

  10. Firmly instruct children to use the ride-on toy in a safe manner. Unsafe behaviors include, but are not limited to:

    • Traveling at unsafe speeds
    • Not riding in the seated position
    • Riding at night or in any conditions of low visibility
    • Riding in any wet conditions including rain, snow, and ice
    • Any kind of stunt riding: jumps, ramps, stairs, hills, sloped surfaces, or other actions involving any notable risk
    • Any kind of off-road riding: rough terrain, dirt, mud, gravel, or any others that involve notable risk
    • Riding near any pool or open body of water
    • Pushing, pulling, or shoving the driver in any way while operating the ride-on toy
    • Pulling or hitching the ride-on toy with other similar moving ride-on toys or products

Assembly Warnings

  • The ride-on toy must be assembled by an adult who has read and understands the instructions in this manual.

  • Choking hazard to children under the age of 3 years.
    This ride-on toy contains small parts that are for adult assembly only. Keep small children away when assembling.

  • Remove and dispose of all protective materials, plastic bags and packaging before assembly.

Pre-Ride Safety Checklist

To be performed by a supervising adult
Before every ride, it is important to carry out the following safety checks. Do not ride a ride-on toy that is not in proper working condition! Replace any worn or broken parts as needed.

Steering and Control

  • The steering wheel or handlebars are tightened and secured in the mount or dashboard.
  • The steering wheel is positioned so that the rider can easily operate and steer the ride-on. There must be no difficulty for the rider in turning and/or operating the foot pedal or steering wheel.
  • The steering wheel is aligned so that the steering column and front wheels are oriented in the same direction.

Wheels

  • The wheels are securely attached to the ride-on and they are in good condition. It is acceptable to have slight lateral movement in each wheel.
  • The wheels have no holes and are not worn down in any one area and that the traction strips are intact and secured to the wheels.

Ride-on

  • Make sure the ride-on is:
    • Clean, dry, and in good condition.
    • All pieces, including steering wheel or handlebars, wheels, and/or hub caps are securely attached.
    • There are no cracks or structural problems on the ride-on toy.
    • If the ride-on toy shows any sign of damage or missing parts DO NOT RIDE IT until the condition is corrected.
  • Make sure all safety labels are in place and readable, and understood by the rider.

Parts Checklist

METAL PEDAL CAR: KT1604 | KT1606 | KT1607

Check that all parts listed are present.

Number| Part name| Qty| | Number| Part name| Qty
---|---|---|---|---|---|---
| Steering wheel cap nut (hardware bag 4)| 1| | U-bracket nut to frame (hardware bag 2)| 2
| Steering wheel| 1| | Steering column gasket (hardware bag 4)| 1
| Steering wheel washer (hardware bag 4)| 1| | Steering column| 1
| Steering column spacer (hardware bag 4)| 1| | Steering column nut| 1
| Windshield| 1| | Steering column washer| 1
| Windshield bolt (hardware bag 3)| 2| 21| Steering column bolt| 1
| Windshield washer (hardware bag 3)| 2| 22| Wheel washer (hardware bag 1)| 2
| Windshield nut (hardware bag 3)| 2| 23| Wheel| 4
| Metal car body| 1| 24| Self-locking wheel nut (hardware bag 1)| 4
| U-bracket flat head bolt (hardware bag 3)| 2| 25| Hub cap| 4
| U-bracket| 1| 26| Drive train| 1
| U-bracket washer to car (hardware bag3)| 2| 27| Seat nut (hardware bag 3)| 2
| U-bracket nut to car (hardware bag 3)| 2| 28| Seat washer (hardware bag 3)| 2
| U-bracket square bolt (hardware bag 2)| 2| 29| Seat bolt (hardware bag 3)| 2
| U-bracket washer to frame (hardware bag 2)| 2| 30| Rear axle| 1
| 31| Bushing (hardware bag 1)| 2

Hardware Bag

  1. wheel assembly
  2. U-bracket assembly
  3. Main body assembly
  4. Main body assembly

Hardware Bag 3: Main body assembly Hardware Bag 4: Main body assembly

Parts

METAL PEDAL CAR: KT1604 | KT1606 | KT1607

KID TRax-KT1604-Classic-Pedal-Car-16

Parts Checklist FIRE TRUCK: KT1605

Check that all parts listed are present.

Number| Part name| Qty| | Number| Part name| Qty
---|---|---|---|---|---|---
| Steering wheel cap nut (hardware bag 4)| 1| 23| Steering column| 1
| Steering wheel| 1| 24| Steering column nut (hardware bag 5)| 1
| Steering wheel washer (hardware bag 4)| 1| 25| Steering column washer (hardware bag 5)| 1
| Steering column spacer (hardware bag 4)| 1| 26| Steering column bolt (hardware bag 5)| 1
| Windshield| 1| 27| Wheel washer (hardware bag 1)| 2
| Windshield nut (hardware bag 3)| 2| 28| Wheel| 4
| Windshield washer (hardware bag 3)| 2| 29| Wheel nut (hardware bag 1)| 4
| Windshield bolt (hardware bag 3)| 2| 30| Hub cap| 4
| Bell cord| 1| 31| Drive train frame| 1
| Bell| 1| 32| Seat nut (hardware bag 3)| 2
| Bell bolt (hardware bag 5)| 2| 33| Seat washer (hardware bag 3)| 2
| Bell washer (hardware bag 5)| 2| 34| Seat bolt (hardware bag 3)| 2
| Bell nut (hardware bag 5)| 2| 35| Rear axle| 1
| Fire truck body| 1| 36| Ladder bracket nut (hardware bag 5)| 4
| U-bracket top bolt (hardware bag 3)| 2| 37| Ladder bracket washer (hardware bag 5)| 4
| U-bracket top washer (hardware bag 3)| 2| 38| Ladder bracket bolt (hardware bag 5)| 4
| U-bracket top nut (hardware bag 3)| 2| 39| Ladder bracket| 2
| U-bracket| 1| 40| Ladder nut (hardware bag 5)| 2
| U-bracket square screw hardware bag 2)| 2| 41| Ladder washer (hardware bag 5)| 2
| U-bracket washer to frame (hardware bag 2)| 2| 42| Ladder long bolt (hardware bag 5)| 2
21| U-bracket nut to frame (hardware bag 2)| 2| 43| Ladder| 2
22| Steering column gasket (hardware bag 4)| 1| 44| Bushing (hardware bag 1)| 2

Parts FIRE TRUCK: KT1605

KID TRax-KT1604-Classic-Pedal-Car-5

FIRE TRUCK: KT1605 HARDWARE BAGS

Hardware Bag

  1. wheel assembly
  2. U-bracket assembly
  3. Main body assembly
  4. Main body assembly
  5. Accessories

Assembly

METAL PEDAL CAR: KT1604 | KT1606 | KT1607 | FIRE TRUCK: KT1605

Assemble the drive train

  1. Insert the rear Axle.
  2. Slide the rear axle through the axle tube until it is centered.
  3. Attach the wheels.
  4. Insert the bushing and wheel onto the rear axle and fasten with the wheel nut.
  5. Insert the washer and wheel onto the front axle and fasten with wheel nut.
  6. Attach the U-bracket.
    • Place the U-bracket over the top of the front axle
    • Align the holes on the U-bracket with the holes on the front axle
    • Insert the bottom U-bracket bolt through the U-bracket and front axle
    • Fasten the U-bracket with the washers and nuts

KID TRax-KT1604-Classic-Pedal-Car-11

Assemble the metal body

Note: Body styles vary depending on your model

  1. Place the car body over the drive train.

    • Align the holes in the seat with the holes in the seat base on the drive train
    • The U-bracket should fit into the square brace located under the car body
  2. Attach the U-bracket to the car.

    • Align the holes on the U-bracket with the holes on the square bracket
    • Insert the top U-bracket bolt through the both the U-bracket and square brace
    • Fasten with the washers and nuts
  3. Fasten the seat to the drive train.

    • Insert a seat bolt down into each hole of the seat
    • Fasten with the washer and bolts
  4. Attach the windshield.

    • Place the windshield into the notch on the hood of the car
    • Insert a bolt into the holes on each side of the windshield
    • Fasten with the washers and nutsKID TRax-KT1604-Classic-Pedal-Car-12
  5. Insert the steering column.

    • Insert the steering column washer onto the long end of the steering column until it reaches the stop
    • Insert the steering column up through the drive train and into the steering column bracket
    • The short end of the steering column inserts up into the front axle
    • Fasten the steering column bolt, washer and nut onto the short end of the steering column
  6. Attach the steering wheel.

    • Insert the steering column tube over the end of the steering column
    • Insert the steering wheel over the end of the axle
    • Fasten with the washer and cap nut
      Before final step: Check that all hardware is tightened and the steering works properly.
  7. Attach the hubcaps.

    • Snap each hubcap into the prongs on the front of the wheels

KID TRax-KT1604-Classic-Pedal-Car-13

Note: If you are assembling the fire truck (model KT1605) continue to the next page for further assembly instructions.

Assembly FIRE TRUCK: KT1605

Assemble the fire truck components

  1. Attach the ladder bracket.
    • Align the bottom holes on the ladder bracket with the holes on the back end of the fire truck body
    • Insert a bolt through each ladder bracket hole and fasten with the washer and nut
    • Repeat these steps for the opposite ladder bracket
  2. Attach the ladder.
    • Place the ladder onto the ladder brackets
  3. Attach the bell.
    • Align the holes on bell bracket with the holes on the hood of the fire truck
    • Insert the bolts through the bell bracket
    • Fasten with the washer and nut from under the fire truck hood
    • Tie one end of the cord to the top of the fire truck bell and the opposite end to the steering wheel

KID TRax-KT1604-Classic-Pedal-Car-15

Maintenance

Service

The ride-on toy should be checked for damage, missing or badly worn parts before each use.

  • Check the tightness of the fasteners before each use. · Check the tightness of the wheels before each use.
  • Store the ride-on toy indoors or cover it with a tarp to protect it from the wet weather. Keep it away from sources of heat, such as stoves and heaters.
  • Do not leave the vehicle in the sun for long periods of time or fading may occur. Store in shade or cover with tarp.
  • Clean the vehicle with a soft, dry cloth. Do not use car wax, abrasive cleaners or wash the vehicle with soap and water.

Do not return this product to the place of purchase. If your ride-on toy needs service, repairs or replacement parts, call:

Pacific Cycle Consumer Relations
Hours: 8:00 am ­ 5:00 pm (CST) Monday – Friday
Phone: 877-741-6154 Email: customerservice@kidtraxtoys.com For a complete list of replacement parts, please contact Pacific Cycle Consumer Relations.
To order parts, please have the model number available, which can be found underneath the seat.

Warranty

One Year Limited Warranty
Pacific Cycle, Inc. (PC) warrants this product to the original retail purchaser as follows: The ride-on toy is warranted against defective materials or workmanship for one year from the date of original purchase. PC will, at its option, provide replacement parts or replace this product. PC reserves the right to substitute if the part or model has been discontinued. To make a claim under this warranty you must contact us at www.kidtraxtoys.com; fax us at 1-800-858-2800, 24 hours a day; write to Kid Trax Consumer Relations Department, Kid Trax Toys,P.O. Box 344 Olney, IL 62450 or call 1-877-741-6154 from 8 a.m. to 5 p.m., Monday through Friday, CST. Proof of purchase is required, and shipping charges are the responsibility of the consumer.

Warranty Limitations
This warranty does not include damages which arise from accident, misuse, abuse, neglect or other causes not arising out of defects in materials or workmanship, nor does it cover damages arising out of service by other than an authorized PC service center. For personal use only. Not for commercial use. The original owner shall pay all labor charges connected with the repair or replacement of all parts. Under no circumstances does this limited warranty include the cost of shipment or transportation to or from an authorized repair center or Kid Trax retailer.

Limitation of Damages
The warranty and remedies as set forth are exclusive and in lieu of all others, oral or written, expressed or implied. In no event will PC or the dealer selling this product be liable to you for any damages, including incidental or consequential damages, arising out of the use or inability to use this product. Some states do not allow limitations as the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you.

Limitations of Warranties and Warranty Terms
Any warranties, including implied warranties of the merchantability and fitness for a particular purpose, shall be limited to the duration and terms of the express written warranty. This warranty gives you specific legal rights, and you may have other rights, which vary from state to state. Neither PC nor the dealer selling this product authorized any person to create for it any other warranty, obligation or liability in connection with this product.

Pacific Cycle Consumer Relations Hours: 8:00 am ­ 5:00 pm (CST) Monday – Friday Phone: 877-741-6154
Email: customerservice@kidtraxtoys.com

© 2021 Pacific Cycle Inc. 4902 Hammersley Rd.
Madison, WI 53711

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals