Velleman VTSI100 Soldering Iron User Manual

: June 10, 2024
: Velleman

Table of Contents

Introduction
Symbols
Safety Instructions
General Guidelines
How to Solder
Maintenance
Features
Documents / Resources

VTSI100 Soldering Iron
User Manual

Introduction

To all residents of the European Union Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules. If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

Symbols

01 CE marking
02 Read and understand this manual and all safety signs before using this appliance.
03 Triman.
04 Green dot.

Safety Instructions

This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision. There are no userserviceable parts inside the device. Refer to an authorized dealer for service and/or spare parts.
Do not immerge the device in any liquid. Keep the main unit away from high heat and fire.
Handle a heated soldering iron with extreme care as the high temperatures may cause burns.
The soldering iron may produce smoke at first use due to a dried-out heating element. This is normal and should only last for approx. 10 minutes.
Never file the soldering tip.
WARNING: This tool must be placed on its stand when not in use.
The temperature of the soldering iron will drop if it is used without the tip.
Let the soldering iron cool after use.
If the supply cord is damaged it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

General Guidelines

Refer to the Velleman ® Service and Quality Warranty on www.velleman.eu.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
Keep this manual for future reference.

How to Solder

File off any dirt, rust or paint on the parts you wish to solder. Heat the parts with the soldering iron.
Apply resin-based solder to the part and melt it with the soldering iron.
NOTE: Be sure to apply a solder paste to the part before applying non- resin-based solder.
Wait for the solder to cool and harden before moving the soldered part.

Maintenance

Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents or strong detergents.

Features

power supply: 220-240 VAC, 50 Hz
power rating: 100 W
spare bit: BITSI100

Use this device with original accessories only. Velleman Group nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.velleman.eu. The informationin this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Group nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

Imported for Perel by Velleman Group nv
Legen Heirweg 33, 9890 Gavere, Belgium
www.velleman.eu
©Velleman Group nv
V. 01 – 16/11/2022