ASUS VY279HGE Series LCD Monitor User Guide

ASUS VY279HGE Series LCD Monitor

Introduction

Copyright © 2023 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Notices

Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

ENERGY STAR complied product

ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.
All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 10 and 30 minutes of user inactivity. To wake your computer, click the mouse or press any key on the keyboard. Please visit http://www.energystar.gov/powermanagement for detail information on power management and its benefits to the environment. In addition, please visit http://www.energystar.gov for detail information on the ENERGY STAR joint program.

NOTE : Energy Star is NOT supported on Free DOS and Linux-based operating system.

This product implements power management functionality. In case of no signal input after 10 seconds, the product automatically goes to sleep/ standby mode.

Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
This Class B digital apparatus meets all requirements of the Canadian Interference
– Causing Equipment Regulations.

Safety Information

• Before setting up the monitor, carefully read all the documentation that came with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or moisture.
• Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
• Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• Do not overload power strips and extention cords. Overloading can result in fire or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges.
• Never push objects or spill liquid of any kind into the slots on the monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100-240V AC.
• If you encounter technical problems with the monitor, contact a qualified service technician or your retailer.
• Adjustment of the volume control as well as the equalizer to other settings than the center position may increase the ear-/headphones output voltage and therefore the sound pressure level.
• Ensure to connect the power cord to a socket-outlet with earthing connection.
• The supplied power adapter and/or power cable are designed to use with the product only. Do not use with other products.

This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Please check local regulations for disposal of electronic products.

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
  Do not lift the display by the stand or the cord.

• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.

• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the monitor. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself!

Conventions used in this guide

WARNING : Information to prevent injury to yourself when trying to complete a task.
CAUTION : Information to prevent damage to the components when trying to complete a task.
IMPORTANT : Information that you MUST follow to complete a task.
NOTE : Tips and additional information to aid in completing a task.

Where to find more information
Refer to the following sources for additional information and for product and software updates.

1. ASUS websites
   The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com

2. Optional documentation
   Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.

3. About Flicker
   https://www.asus.com/Microsite/display/eye_care_technology/

Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling information in different region.

Product information for EU energy label

Welcome!

Thank you for purchasing the ASUS®
LCD monitor!
The latest widescreen LCD monitor from ASUS provides a broader, brighter and crystal-clear display, plus a host of features that enhance your viewing experience.
With these features, you can enjoy the convenience and delightful visual experience that the monitor brings to you!

Package Contents

Check your package for the following items:

• LCD monitor
• Monitor arm
• Monitor base
• Quick start guide
• Warranty card
• Power cord
• HDMI cable
• L-shaped screwdriver (optional)
• 4 screws

If any of the above items is damaged or missing, contact your retailer immediately.
If you need to replace the power cord or the connection cable(s), please contact ASUS customer service.

Monitor Introduction

Front view

1. Power indicator
   • The color definition of the power indicator is as the below table. Status| Description
   ---|---
   White| On
   Amber| Standby mode
   Off| Off

2. Central button:
   • Press this button to turn the monitor on during standby mode.
   • Press this button to display the OSD menu when the OSD is off.
   • Enters the OSD menu.

3. Up key:
   • Press this button to turn the monitor on during standby mode.
   • Brightness shortcut key. To change the hotkey function, go to the Shortcut > Shortcut 1 menu.
   • Move the option upwards or increase the option value.

4. Right key:
   • Press this button to turn the monitor on during standby mode.
   • Power Off shortcut key.
   • Enter the option of the next layer.

5. Down key:
   • Press this button to turn the monitor on during standby mode.
   • Energy Saving shortcut key. To change the hotkey function, go to the
   Shortcut > Shortcut 2 menu.
   • Key Lock shortcut key. Press and hold it for 5 seconds to enable/disable
   Keys Lock.

6. Left key:
   • Press this button to turn the monitor on during standby mode.
   • Exit the OSD menu or return to the previous layer.

Back view

1. Control button.
2. AC-IN port. This port connects the power cord.
3. HDMI port. This port is for connection with an HDMI compatible device.
4. Earphone jack. This port is only available when an HDMI/DisplayPort cable is connected.
5. Kensington lock slot.
   

Assembling The Monitor Arm/base

To assemble the monitor base:

1. Have the front of the monitor face down on a table.
2. Place the arm hinge of the stand assembly onto its compartment on the rear of the monitor.
3. Attach the base into the arm, making sure the tab on the arm fits into the groove on the base.
4. Fix the base to the arm by fastening the bundled screw.
   We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.
   

Base screw size: M6 x 12 mm.
Hinge screw size: M4 x 10 mm.

Adjusting The Monitor

• For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you.
• Hold the stand to prevent the monitor from falling when you change its angle.
• The recommended adjusting angle is +23˚ to -5˚.
  

It is normal that the monitor slightly shakes while you adjust the viewing angle.

Detaching The Arm (For Vesa Wall Mount)

The detachable arm/base of this monitor is specially designed for VESA wall mount.
To detach the arm/base:

1. Have the front of the monitor face down on a table.
2. Loosen the screw on the base. (Figure 1)
3. Remove the base. (Figure 2)
4. Remove the arm cover. (Figure 3)
5. Use a screwdriver to remove the screw(s) on the hinge, then remove the hinge. (Figure 4)
   

We recommend that you cover the table surface with soft cloth to prevent damage to the monitor.

• The VESA wall mount kit (100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load 22.7kg (Screw size: M4 x 10 mm)

Connecting The Cables

Connect the cables as the following instructions:

• To connect the power cord: Connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet.

• To connect the HDMI cable:
  a. Plug one end of the HDMI cable to the monitor’s HDMI port.
  b. Connect the other end of the HDMI cable to your computer’s HDMI port.

• To use the earphone: connect the end with plug type to the monitor’s earphone jack when an HDMI signal is fed.

If you need to replace the power cord or the connection cable(s), please contact ASUS customer service.

Turning On The Monitor

Press any button to turn on the monitor . See page 1-2 for the location of the power button. The power indicator lights up in white to show that the monitor is ON.

OSD (On-screen Display) Menu

How to reconfigure

1. Press the Central button to display the OSD menu.
2. Press the Up and Down keys to toggle between options in the OSD menu. As you move from one icon to another, the option name is highlighted.
3. To select the highlighted item on the menu, press the Central button.
4. Press the Up and Down keys to select the desired parameter.
5. Press the Central key to enter the slide bar and then use the Up, Down, Left, right keys, according to the indicators on the menu, to make your changes.
   

OSD function introduction

1. Splendid
   This function contains 8 sub-functions you can select for your preference.
   
   • Standard Mode: Best choice for document editing with Splendid Video Enhancement.
   Standard Mode meets Energy Star® requirements.
   • sRGB Mode: Best choice for viewing photos and graphics from PCs.
   • Scenery Mode: Best choice for scenery photo display with Splendid Video Enhancement.
   • Theater Mode: Best choice for movies with Splendid Video Enhancement.
   • Game Mode: Best choice for game playing with Splendid Video Enhancement.
   • Night View Mode: Best choice for dark-scene games or movies with Splendid Video Enhancement.
   • Reading Mode: This is the best choice for book reading.
   • Darkroom Mode: This is the best choice for a weak ambient light environment.
   • In the Standard mode, the following function(s) are not user-configurable: Saturation, Skin Tone, Sharpness, ASCR.
   • In the sRGB mode, the following function(s) are not user-configurable: Brightness, Contrast, Saturation, Color Temp., Skin Tone, Sharpness, ASCR.
   • In the Reading mode, the following function(s) are not user-configurable: Contrast, Saturation, Color Temp., Skin Tone, ASCR.

2. Eye Care
   In this function, you can adjust settings to better protect your eyes.
   
   • Blue Light Filter: In this function, you can adjust the blue light filter from 0 to Max.

• 0: No change.
• Max: The higher the level, the less blue light is scattered. When blue light filter is activated, the default settings of Standard Mode will be automatically imported. Besides maximum level, the brightness is user-configurable. Maximum is the optimized setting. It is in compliance with TUV low blue light certification. The brightness function is not user configurable.
  When color augmentation is in default value (50).
  Please refer to the following to alleviate eye strains:
  • Users should take some time away from the display if working for long hours. It is advised to take short breaks (at least 5 mins) after around 1 hour of continuous working at the computer. Taking short and frequent breaks is more effective than a single longer break.
  • To minimize eye strain and dryness in your eyes, users should rest the eye periodically by focusing on objects that are far away.
  • Eye exercises can help to reduces eye strain. Repeat these exercises often. If eye strain continues please consult a physician. Eye exercises: (1) Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal.
  • High energy blue light may lead to eye strain and AMD (Age-Related Macular Degeneration). Blue light filter to reduce 70% (max.) harmful blue light to avoiding CVS (Computer Vision Syndrome) when the user adjusts blue light filter bar to maximum level.
  • Rest Reminder: This function provides you a rest reminder according to how long you set for your working time. For example, if you set a 30-minute working time and there will be a pop up reminder appeared on the upper left corner of the monitor for 5 seconds when time is up. Press any key to make this reminder OSD disappear.
  When this function is enabled, the following functions are not available:
  Splendid Demo Mode, GamePlus, QuickFit.
  • Color Augmentation: The adjusting range of color enhancement is from 0 to

100. • This function is not available when sRGB Mode is selected in the Splendid menu.
     • This function is not available when Reddish or Yellowish is selected in the Skin Tone menu.

101. Color
     Set a desired color setting from this menu.
     
     • Brightness : The adjusting range is from 0 to 100.
     • Contrast : The adjusting range is from 0 to 100.
     • Saturation : The adjusting range is from 0 to 100.
     • Color Temp.: Contains 4 modes including Cool, Normal, Warm and User Mode.

102. Image
     Set the image related setting from this menu.
     
     • Sharpness: The adjusting range is from 0 to 100.
     • Trace Free: Adjusts the response time of the monitor.
     • Aspect Control: Adjusts the aspect ratio to Full or 4:3.
     4:3 is only available when input source is in 4:3 format.
     • ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
     • Motion Sync: Offers a more clear mode while displaying motion pictures. Please note this function only works when the refresh rate is 144Hz. It includes two modes: Normal Mode and Advanced Mode, which can provide different effects.
     • When this function is enabled, the system will automatically reduce the brightness level.
     • If the AMD Free Sync is enabled, the Motion Sync function is grayed out.
     • AMD FreeSync Premium: Allows an AMD FreeSync supported graphics source (HDMI to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and lowlatency display update.
     This function is not available when Motion Sync is enabled.

103. Settings
     Allows you to adjust the system.
     
     • Splendid Demo Mode: Splits the screen into two for Splendid modes comparison. (Scenery mode only)
     • Volume: Adjusts the volume level.
     • GamePlus: The GamePlus function provides a toolkit and creates a better gaming environment for users when playing different types of games.

• Corsshair: The crosshair overlay with different crosshair options lets you choose the one that best suits the game you’re playing.

• Timer: You can position the timer on the upper left corner of the display so you can keep track of the gaming time.

• FPS Counter: The FPS (frames per second) counter lets you know how smooth the game is running.

• Display Alignment: Display Alignment displays alignment lines on 4 sides of the screen, serving as an easy and handy tool for you to line up multiple monitors perfectly.
  • QuickFit: You can have a preview of the document or photo layout directly on screen without printing test copies.

• Alignment: This facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel.
  

• Paper size: You can view the documents in real size on the screen.
  

• Photo: The various real photo sizes displayed provides photographers and other users to accurately view and edit their photos in real size on the screen.
  
  • Power Saving: Reduces power consumption. The default setting is “Deep Level”. When “Deep Level” is selected, the maximum brightness value is fixed and Splendid mode is fixed at “Standard Mode”.
  • OSD Setup:

• Adjusts the OSD timeout from 10 to 120 seconds.

• Enables or disables the DDC/CI function.

• Adjusts the OSD background from opaque to transparent.
  • Language: There are 22 languages for your selection, including English, French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian, Ukrainian.
  • Key Lock: To disable all function keys. Press the Down key for over 5 seconds to cancel the key lock function.
  • Information: Shows the monitor information.
  • Power Indicator: Turns the power LED indicator on/off.
  • Power Key Lock: Enables or disables the power key.
  • All Reset: “Yes” allows you to restore the default settings.

  6. Shortcut
     Defines the functions for Shortcut 1 and 2 buttons.
     
     • Shortcut 1/Shortcut 2: selects a function for Shortcut 1 and 2 buttons.
     When a certain function is selected or activated, your shortcut key may not support. Available function choices for shortcut: Blue Light Filter, Splendid, Brightness, Contrast, Color Temp., Volume, Game Plus, Rest Reminder, Color Augmentation, Energy Saving.

Specifications Summary

0.3 W
Temperature (Operating)| 0˚C~40˚C
Temperature (Non-operating)| -20˚C~+60˚C
Dimensions (W x H x D) without stand| 615.58 x 366.17 x 55.86 mm
Dimensions (W x H x D) with stand| 615.58 x 436.83 x 201.7 mm
679 x 445 x 148 mm (package)
Weight (Esti.)| 5.2 kg (Net); 4.7 kg (without stand); 5.8 kg (Gross)
Multi-languages| 22 languages (English, French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish, Romanian, Hungarian,
Turkish, Simplified Chinese, Traditional Chinese,
Japanese, Korean, Thai, Indonesian, Persian, Ukrainian)
Accessories| Quick start guide, warranty card, power cord, HDMI cable, L-shaped screwdriver (optional), 4 screws
Compliance and Standards| CE, CB, CU, RCM, cTUVus, UKrSEPRO, KC (EK)/ MSIP (KCC)/ E-Standby (E-Boy), PSE,
VCCI, Energy Star, HDMI, Windows 10 & 11 WHQL, MEPS, EU Energy Label, CEC, RoHS, WEEE, EuP (Power Saving Only), EPEAT Silver, PC Recycle, J-MOSS, TUV Low Blue Light, TUV Flicker Free, ISO 9241-307, Ukraine Energy,
Sdoc, Vietnam Energy Efficiency

*Specifications are subject to change without notice.
**Measuring a screen brightness of 200 nits without audio/ USB/ Card reader connection.

Outline Dimensions

Troubleshooting (FAQ)

• Press the    button to check if the monitor is in the ON mode.
• Check if the power cord is properly connected to the monitor and the power outlet.

The power LED lights amber and there is no screen image|

• Check if the monitor and the computer are in the ON mode.
• Make sure the signal cable is properly connected the monitor and the computer.
• Inspect the signal cable and make sure none of the pins are bent.
• Connect the computer with another available monitor to check if the computer is properly working.

Screen image is too light or dark|

• Adjust the Contrast and Brightness settings via OSD.

Screen image bounces or a wave pattern is present in the image|

• Make sure the signal cable is properly connected to the monitor and the computer.
• Move electrical devices that may cause electrical interference.

Screen image has color defects (white does not look white)|

• Inspect the signal cable and make sure that none of the pins are bent.
• Perform All Reset via OSD.
• Adjust the R/G/B color settings or select the Color Temperature via OSD.

Supported Operating Mode

Resolution Frequency| Vertical Frequency (Hz)| Horizontal Frequency (KHz)
---|---|---
640 x 480| 60Hz| 31.469KHz
640 x 480| 67Hz| 35KHz
640 x 480| 72Hz| 37.861KHz
640 x 480| 75Hz| 37.5KHz
720 x 400| 70Hz| 31.469KHz
800 x 600| 56Hz| 35.156KHz
800 x 600| 60Hz| 37.88KHz
800 x 600| 72Hz| 48.077KHz
800 x 600| 75Hz| 46.875KHz
1024 x 768| 60Hz| 48.363KHz
1024 x 768| 70Hz| 56.476KHz
1024 x 768| 75Hz| 60.023KHz
1152 x 864| 75Hz| 67.5KHz
1024 x 768| 85Hz| 68.677KHz
1152 x 864| 75Hz| 67.5KHz
1280 x 720| 60Hz| 44.772KHz
1280 x 720| 60Hz| 45KHz
1280 x 960| 60Hz| 60KHz
1280 x 1024| 60Hz| 63.981KHz
1280 x 1024| 75Hz| 79.976KHz
1440 x 900| 60Hz| 55.469KHz
1680 x 1050| 60Hz| 64.674KHz
1920 x 1080| 60Hz| 66.587KHz
1920 x 1080| 120Hz| 137.2KHz
1920 x 1080| 144Hz| 158.11KHz
720 x 480P| 59.94/60Hz| 31.469KHz/31.5KHz
720 x 576P| 50Hz| 31.25KHz
1280 x 720P| 50Hz| 37.5KHz
1280 x 720P| 59.94/60Hz| 44.955KHz/45KHz
1440 x 480P| 59.94/60Hz| 31.469KHz/31.5KHz
1440 x 576P| 50Hz| 31.25KHz
1920 x 1080P| 50Hz| 56.25KHz
1920 x 1080P| 59.94/60Hz| 67.433KHz/67.5KHz
1920 x 1080P| 100Hz| 112.5KHz
1920 x 1080P| 120Hz| 135KHz

References

• ASUS Global
• Homepage | ENERGY STAR
• ASUS Eye Care Monitors

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>