GAME OF BRICKS 76917 Light Kit for 2 Fast 2 Furious Nissan Skyline Instruction Manual
- June 11, 2024
- Game Of Bricks
Table of Contents
GAME OF BRICKS 76917 Light Kit for 2 Fast 2 Furious Nissan Skyline
Product Information
The Light Kit for 2 Fast 2 Furious Nissan Skyline GT-R (R34) is a product
designed to enhance the visual appeal of your Lego model.
The kit includes aviation-grade wire with high tension and pressure tolerance
that provides a perfect hidden-line effect. The product comes with three bags
of Lego pieces that need to be assembled to install the light kit. The
installation is complete when the light kit is connected to the battery box or
any other power source with a maximum voltage of 6V.
Product Usage Instructions
- Open the box and verify that all the components are present.
- If you face any challenges during the installation process,reach out to support@gameofbricks.eu for assistance. The company offers two years of free light kit maintenance.
- Begin assembly by following the instructions in bag 1 (Step 1,2, 3, and 4).
- Next, follow the instructions in bag 2 (Step 2, 3, 4, 5, 6, and 7).
- Finally, follow the instructions in bag 3 (Step 3, 4, and 5).
- Connect the light kit to the battery box. If you plan to use another power source, make sure the maximum voltage is 6V.
- Be careful not to cut through the severely thin aviation-grade wire during installation as it might be susceptible to shearing.
Also, avoid pressing brick pieces down on the wire.
Thank You
For Purchasing this product. To give you the perfect hidden-line effect, we
use severely thin aviation-grade wire with high tension and pressure
tolerance. However, due to its thin nature,be careful not to cut through it as
it might be susceptible to shearing during installation. Always be careful not
to press brick pieces down on the wire.
Let’s Get Started
if you face any challenges, please feel free to reach out via
support@gameofbricks.eu Please note that we
offer 2 years of free light kit maintenance.
INSTRUCTION
Step 1 (Bag 1)
ASSEMBLY
Step 2
SETTING
Step 3
Connect light kit to the battery box and installation will be complete. If you would like to use another power source, please make sure the maximum voltage is 6V.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>