GAME OF BRICKS 76914 Light Kit for Ferrari 812 Competizione Instruction Manual
- June 11, 2024
- Game Of Bricks
Table of Contents
GAME OF BRICKS 76914 Light Kit for Ferrari 812 Competizione
Thank You
For Purchasing this product. To give you the perfect hidden-line effect, we
use severely thin aviation-grade wire with high tension and pressure
tolerance. However, due to its thin nature, be careful not to cut through it
as it might be susceptible to shearing during installation. Always be careful
not to press brick pieces down on the wire.
Let’s Get Started
if you face any challenges, please feel free to reach out via
support@gameofbricks.eu Please note that we
offer 2 years of free light kit maintenance.
Product Information
The Light Kit for Ferrari 812 Competizione 76914 is a product that provides
LED lighting to enhance the look of your Ferrari model. The kit uses aviation-
grade wire that is severely thin, with high tension and pressure tolerance.
However, due to its thin nature, it is susceptible to shearing during
installation. It is important to be careful not to cut through the wire or
press brick pieces down on it.
The light kit comes with two bags containing different parts required for
installation. The kit can be connected to the battery box, and it is
recommended to use a maximum voltage of 6V for power.
If you face any challenges during installation, you can reach out to
support@gameofbricks.eu for assistance. The
product comes with a 2-year free maintenance offer.
Product Usage Instructions
- Step 1: Open Bag 1 and follow the instructions provided to install the light kit components.
- Step 2: Open Bag 2 and follow the instructions provided to install the remaining light kit components.
- Step 3: Connect the light kit to the battery box. If you prefer to use another power source, make sure the maximum voltage is 6V.
Note: Be careful not to cut through the severely thin aviation-grade wire during installation, as it may shear easily. Also, avoid pressing brick pieces down on the wire.
INSTALLATION
STEP 1
STEP 2
Connect light kit to the battery box and installation will be complete. If you would like to use another power source, please make sure the maximum voltage is 6V.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>