XENX SC-01 Shortcuts Companion User Manual
- June 11, 2024
- XENX
Table of Contents
XENX SC-01 Shortcuts Companion
Thank you for choosing the XENX SC-01 Shortcuts Companion. This product comes with a Bluetooth dongle and a quick start guide. Please note that the AA-size battery required for the controller is not included in the package.
Product Package Content
- Shortcuts Companion
- Bluetooth Dongle
- Quick Start Guide
Installation Instructions
- Install Battery Open the battery cover on the back of the controller and insert a standard AA-size battery. Close the battery cover.
- Install Driver Download and install the XENX Driver from www.xenx-tech.com/download
- Plug in the Bluetooth Dongle to the Computer
- Configure Quick Shift Layouts The Quick Shift Layouts can be configured through the Driver Interface. Use the Mode Selection Key to cycle through the available modes, and use the Wheel Key and Key 1 and Key 2 to select the desired layout.
Quick Shift Layouts
| Layout | Wheel Up | Wheel Down | Wheel Click | Key 1 | Key 2 |
|---|---|---|---|---|---|
| Normal | PageUp | PageDown | Ctrl+0 | Key 1 | Ctrl+Key 1 |
| QShift1 | PageUp | PageDown | Ctrl+0 | Key 1 | Ctrl+Key 1 |
| QShift2 | PageUp | PageDown | Ctrl+0 | Ctrl+Key 1 | Ctrl+Key 2 |
| QShift1+QShift2 | PageUp | PageDown | Ctrl+0 | Ctrl+Key 1 | Ctrl+Key 2 |
FCC Information and Copyright
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Support
If you have any questions or concerns, please contact us at support@xenx- tech.com or visit our website at www.xenx- tech.com.
Thank you for choosing XENX SC-01 Shortcuts Companion
Package content
Install battery
Open the battery cover on the back side of the controller. Install a standard AA-size battery and close the battery cover.
Install driver
Please download the install XENX Driver with the following link：
Plug XENX Bluetooth dongle to the computer
Start configuring your favorite Shortcuts keys in Xenx Driver
Mode Selection Key
FCC STATEMENT
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC RF warning statement: the device has been evaluated to meet general
RF exposure requirements, The device can be used in portable exposure
conditions without restriction.
User Manual download page
Warranty information
Should you have any questions, please contact us
support@xenx-tech.com www.xenx- tech.com
©2022 Xenx Technology Limited. All Right Reserved. * AA size battery is not included
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>