HOMVILLA 8808 LED Alarm Clock User Guide

LED Alarm Clock
Please Read It Carefully Before Use
User Guide

8808 LED Alarm Clock

Video Guide

https://youtu.be/-QNQXScDmk8

BUTTON LAYOUT

Power On

The alarm clock has 2 modes of use: USB powered mode and no power connection mode. Regardless of which mode you use, you will first need to turn the alarm switch to ON.

• USB powered mode
  1. Use the included power cord to connect the alarm clock to the adapter (5V/1A or 5V/2A).
  2. In this mode, the alarm clock screen will remain on.

• No power connection mode
  1. You can also use this alarm clock without power connection, but please fully charge the alarm clock before use this mode.
  2. Disconnect the power cord.
  3. In this mode, the alarm screen will automatically turn off after 6 seconds of light, and then enter the energy-saving state. Press any button and it will light up again for 6 seconds.
  4. This alarm clock has voice-activated function. You can also light up the screen by making a sound.
  Note: Remove the protective film on the surface of the alarm clock screen before use.
  Note: The voice-activated function can only be used when the power supply is NOT connected.

Set the Time

1. Press and hold the “TIME SET” button for 3 seconds, the “hour” digits will flash.
   Press the “+” or “-” button to adjust “hour”.

2. Press the “TIME SET” button to confirm “hour” setting and enter “minute” setting, the “minute” digits will flash. Press the “+” or “-” button to adjust “minute”.

3. Press the “TIME SET” button again to confirm “minute” setting and complete time setting.
   Note: When setting the time, pay attention to whether the time format is 12-hour or 24-hour.
   When the time format is 12-hour, the alarm clock will display AM or PM. You can short press the “TIME SET” button to switch the time format.

Set the Alarms

Before setting the alarms, make sure that the alarm switches on the back of the alarm clock are all turned on. Otherwise, the alarms you set will not be activated.

When the alarm switches are turned on, the screen will display the alarm icons and .

1. Press and hold the “ALARM SET” button for 3 seconds, it enters alarm #1 setting.
   The “hour” digits will flash. Press the “+” or “-” button to adjust “hour”.

2. Press the “ALARM SET” button to confirm “hour” setting and enter “minute” setting, the “minute” digits will flash. Press the “+” or “-” button to adjust “minute”.

3. Press the “ALARM SET” button again to confirm “minute” setting and enter alarm #1 ringtone setting. Press the “+” or “-” button to select an alarm ringtone.

4. Press the “ALARM SET” button again to complete alarm #1 setting and enter alarm #2 setting.

5. Repeat the above steps to complete the alarm #2 setting.
   Note: If you are using 12-hour time format, you need to pay special attention to whether the alarm time you set is correct (AM or PM).
   Note: If you set the same alarm time for the 2 sets of alarms and keep 2 sets of alarms on, alarm #2 will take precedence.

Set the Alarm Volume

In time display mode, press the “-” button repeatedly to switch among 3 levels of volume. When switching to the volume you want to set, you can either wait for the music playback to finish and automatically completing the volume setting, or you can confirm the volume setting by pressing other button manually.

Alarm Switch

There are 2 alarm switches on the back of the alarm clock, which can independently control 2 sets of alarms.

1. Turn the alarm switch to ON, the alarm or alarm will be turned on, and the alarm icon or will be displayed on the screen.
2. Turn the alarm switch to OFF to turn off the alarm.
3. When the alarm goes off, press any button on the back of the alarm clock to stop the alarm, and the alarm will go off tomorrow. If there is no operation, the alarm will keep ringing for 2 minutes and then stop, and the alarm will go off tomorrow.
4. If you need to turn off the alarm completely (i.e., the alarm will not go off in the future), you need to turn the alarm switch to OFF.
5. If you need to pause the alarm and let it go off again after 5 minutes, please refer to the next chapter “Snooze Function”.

Snooze Function

When the alarm goes off, touch the “SNOOZE/LIGHT” button to pause the alarm and enter snooze mode. The alarm icon will keep flashing and the alarm will goes off  again after 5 minutes. Snooze mode has no limit on the number of times. When the alarm goes off again, you can still press the “SNOOZE/LIGHT” button to enter snooze mode.
You can press any button on the back of the alarm clock to exit snooze mode and stop the alarm.

Adjust Screen Brightness

• Manual adjustment
  Touch the “SNOOZE/LIGHT” button to adjust the screen brightness. There are 4 levels of brightness.

• Automatic adjustment
  If you use USB powered mode, the alarm clock will automatically adjust the screen brightness at different times. It automatically adjust to high brightness from  7:0019:00, adjust to medium brightness from 19:00-0:00, and adjust to low brightness from 0:00-7:00. During this time, you can still manually adjust the screen brightness by touching the “SNOOZE/LIGHT” button.

Note: If you have manually adjusted the screen brightness, the automatic screen brightness adjustment function will be disabled. To use this feature again, you need to reset the alarm clock.

Switch Temperature Unit and Time Format
In time display mode, press the “+” button to switch the temperature unit between degrees Celsius and Fahrenheit.
In time display mode, press the “TIME SET” button to switch the time format between 12-hour and 24-hour.
Note: In order to ensure the accuracy of the temperature, please leave the alarm clock for more than 30 minutes after opening the package.

Low Battery Alert

When the alarm clock displays the low battery icon , the screen flickers abnormally or the screen does not display, please use the included USB power cord to connect the alarm clock to the adapter to charge it in time. Please only use 5V/1A or 5V/2A adapter/ power bank/ USB power supply port. Using a higher wattage power source may cause damage to the alarm clock’s batteries or electronic components.

Daily Maintenance

Do not use the alarm clock in hot and humid environments. Keep the alarm clock dry and use soft tissue or cloth to clean the alarm clock.
In the case of crash, abnormal display, inability to operate buttons, etc., press the reset button to restore the alarm clock to factory settings.
This alarm clock is used as a reference for healthy life and cannot be used as a professional measuring instrument.
If you do not use this alarm clock for a long time, please charge it every 3 months.
For one-on-one guidance, please contact us at support@homvillalife.com or directly on Amazon (find your order and contact us, or search for HOMVILLA on Amazon)

SPECIFICATIONS

Shenzhen 518000, China
Weight| 158g| EC REP| UNLIMITE
24 Rue Lamartine
Eybens, 38320, France unlimite-sas@hotmail.com
Material| ABS| UK REP| LEDA TECHNOLOGY CO., LIMITED 4D Salisbury Road, Weston- Super-Mare, Somerset, United Kingdom, 8522 8EW ledatec@hotmail.com

Service Email
support@homvillalife.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>