ring BHACT001 Mobile Connectivity Device User Guide
- June 11, 2024
- Ring
Table of Contents
Mobile Connectivity Device
Quick Start Guide
-
In the app, tap Set Up a Device.
-
Scan this QR code.
This identifies your device for fast and easy setup. -
Find the OBD-II port on your automobile.
It’s often found in the footwell below the steering wheel. If a cover or device is blocking the port, remove it. -
Fully insert your device into the port. Then give it a wiggle to make sure it’s secure.
Do not connect device using a Y-adapter cable.
IMPORTANT PRODUCT INFORMATION
SAFETY AND COMPLIANCE INFORMATION
Use Responsibly. Read all instructions and safety information before use.
SAFETY INFORMATION
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
Do not expose your device to liquids. If your device gets wet, carefully unplug it without getting your hands wet and wait for the device to dry completely before plugging it in again. Do not attempt to dry your device with an external heat source, such as a microwave oven or a hair dryer. If the device appears damaged, discontinue use immediately. To avoid risk of electric shock, do not touch your device during a lightning storm.
CAUTION: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
If your vehicle is going to be parked for an extended period of time, we recommend that you unplug the device to avoid draining your vehicle’s battery.
Product Specifications
Device Name: Mobile Connectivity Device
Model: 5AT3T6
Electrical Rating:
12-20V, 250mA max (at 12V), 3W max (at 12v)
Operating Conditions: -4°F to 140°F (-20°C to 60C°),
0-95% humidity (non-condensing)
FCC COMPLIANCE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Information on this device is on file with the FCC and can be found by inputting the device’s FCC ID into the FCC ID Search form avail-able at fcc.gov/oet/ea/fccid.
The party responsible for FCC compliance is Ring LLC, 12515 Cerise Ave, Hawthorne, CA 90250 USA
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part IS of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
INFORMATION REGARDING EXPOSURE TO RADIO FREQUENCY ENERGY:
The Device meets the FCC Radio Frequency Emission Guidelines and are certified with the FCC Information on these Products is on file with the FCC and can be found by inputting such Products FCC ID (which can be found on the bottom of the Device) into the FCC ID Search form available at fcc.gov/oet/fccid
FOR PORTABLE DEVICE USAGE
(<20cm from body/SAR needed)
RADIATION EXPOSURE STATEMENT:
The product complies with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.
The output power of the radio technology used in the Products is below the radio frequency exposure limits set by the FCC. Nevertheless, it is advised to use the product in such a manner that minimizes the potential for human contact during normal operation.
RECYCLING YOUR DEVICE PROPERLY:
In some areas, the disposal at certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to amazon.com/devicesupport.
TERMS OF SERVICE AND WARRANTY
By purchasing or using the product, you agree to the Terms of Service found at
ring.com/terms.
For information on our warranty, visit
ring.com/legal.
IC12022 Ring LLC or its affiliates. Ring and all related marks are trademarks of Ring LLC or its affiliates.