EOBDTOOL BM2 Vgate Bluetooth 4.0 Battery Assistant Wireless 6-20V Automotive Battery Load Tester User Manual
- June 4, 2024
- EOBDTOOL
Table of Contents
EOBDTOOL BM2 Vgate Bluetooth 4.0 Battery Assistant Wireless 6-20V
Automotive Battery Load Tester User Manual
The product is used to monitor the car battery, starting system and charging system. After being installed on the battery, the mobile phone can monitor the starting status and charging status of the battery in real time through the Bluetooth 4.0 connection.
App-connected product application distance:
The maximum signal distance without blocking is 10 meters. If exceed 10 meters or block exists, it will affect the signal strength.
How to Install the Product
-
Install red connector to positive pole and black to negative pole, then firm them.(Fig 1)
(Builtin short circuit prevention safety switch, it will automatically cut off power when current is too large. Also reverse connection protection built in,will not damage vehicle and product in case of reverse polarity.)
-
Search Vgate Asst on App Store or Google Play to download app.
App Operation
- Turn on the Bluetooth of mobile ,Run App.
- Click “ ” in the upper left corner and select Bateery Asst to connect.(Fig 3)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>