URBAN PRIME Smart Rear Light for Bikes User Manual
- June 11, 2024
- URBAN PRIME
Table of Contents
URBAN PRIME Smart Rear Light for Bikes
Product Information: Smart Rear Light for Bikes
The Smart Rear Light for Bikes is a bike accessory that functions as a safety light for bikers. It comes with a built-in rechargeable battery that can be charged using a DC 5V, 1A charger or a computer USB port. The light features a smart brake system and flashing modes that can be controlled using the On/Off button.
Product Usage Instructions
- How to Install: Follow the instructions provided in the user manual to install the Smart Rear Light for Bikes on your bike.
- On/Off Button Operation: To power on the light, long press the On/Off button. To power off, long press the button again. To switch the flashing mode, short press the button.
- How to Use Smart Brake: Refer to the user manual for instructions on how to use the smart brake system.
- How to Charge: To charge the Smart Rear Light for Bikes, use a DC 5V, 1A charger or a computer USB port. Connect the device to the charger using the MRICO-USB input.
- Notice: Follow these safety precautions while using the Smart Rear Light for Bikes:
- Do not throw the used battery into water or uncontrolled natural environment.
- Do not place the product on fire or in an extremely high temperature environment.
- If the product is not used continuously for six months, charge it at least once to avoid affecting your experience.
- The product is only suitable for use in light rain environment. Do not use the product in moderate or heavy rain or drop soaked in the water.
How to install
Use of On/Off Button
- Long press: Power on
- Long press again: Power off
- Short press: Switch the flashing mode
How to use smart brakes
This product has a brake warning function. Due to the diversity and complexity of road conditions, 100% successful detection cannot currently can not been guaranteed. Please do not use the brake indicator as the only criterion for safety judgment.
- Turn on the smart brake function: in the charging state, long press the power button, the light will flash.
- Turn off the smart brake function: in the charging state, press and hold the power button again, the 4 lights below the light will always be highlighted.
How to charge
This product has a built-in rechargeable battery. Please use a DC 5V, 1A charger or a computer USB port to recharge the device.
Safe use notice
- Do not throw the used battery into water or uncontrolled natural environment. Do not place the product on fire or in an extremely high temperature environment.
- When the product is not used continuously for six months. Please charge it at least once. Otherwise it may affect your experience.
- The product is only suitable for use in light rain environment. Do not use the product in moderate or heavy rain or drop soaked in the water.
Imported and distributed by M.T. Distribution Srl
via Bargellino 10 c/d, 40012, Calderara di Reno, (BO) Italy
www.platum.com
Errors and omissions excepted
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>