BOSE ControlCenter CV41 4-to-1 Converter Instruction Manual
- June 11, 2024
- Bose
Table of Contents
ControlCenter CV41 4-to-1 Converter
Instruction Manual
Important Safety Instructions
Please read this owner’s guide carefully and save it for future reference.
This product is intended for installation by professional installers only!
This document is intended to provide professional installers with basic
installation and safety guidelines for this product in typical fixed-
installation systems. Please read this document before attempting
installation.
WARNING:
-
All Bose products must be installed in accordance with local, state, federal and industry regulations. It is the installer’s responsibility to ensure installation of the product is performed in accordance with all applicable codes, including local building codes and regulations. Consult the local authority having jurisdiction before installing this product.
-
To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture.
-
Do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids such as vases, on or near the apparatus.
Exposure to liquid may create a fire hazard. -
Do not place any naked flame sources, such as lighted candles, on or near the apparatus.
-
This product is not intended for installation or use in indoor water facility areas (including, without limitation, indoor pools, indoor water parks, hot tub rooms, saunas, steam rooms and indoor skating rinks).
CAUTION: Do not make unauthorized alterations to the product; doing so
may compromise safety, regulatory compliance, system performance, and may void
the warranty.
This symbol means there are important operating and maintenance instructions
in this guide.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources, such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Refer all servicing to qualified personnel.
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
This product conforms to all applicable EU directive requirements. The
complete Declaration of Conformity can be found at
www.Bose.com/compliance
**This product conforms to all applicable Electromagnetic Compatibility
Regulations 2016 and all other applicable UK regulations.
The complete declaration of conformity can be found at:
www.Bose.com/compliance
www.Bose.com/compliance
China Importer: Bose Electronics (Shanghai) Company Limited, Level 6, Tower D,
No. 2337 Gudai Rd. Minhang
District, Shanghai 201100
UK Importer: Bose Limited Bose House, Quayside
Chatham Maritime, Chatham, Kent, ME4 4QZ, United
Kingdom
EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The
Netherlands
Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas
405-204, Lomas de Chapultepec,
11000 México, D.F. For importer & service information: +5255 (5202) 3545
Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10,
Section 3, Minsheng East Road, Taipei City 104, Taiwan.
Phone Number: +886-2-2514 7676
Limited Warranty**
Your product is covered by a limited warranty, Visit
pro.Bose.com for warranty details.
Use the ControlCenter CV41 4-to-1 converter to create a single home run
connection back to a PowerShare PS602, PS404A, or PS604A amplifier when
multiple CC-1 zone controllers are distributed throughout an installation.
Connect each zone controller to the CV41 converter using CAT 5 cables with
RJ-45 connectors, then run a single CAT 5 cable from the CV41 converter to
the amplifier.
For more information, see the ControlCenter Zone Controllers Installation and
Operation Guide.
CV41 Converter Diagram
Connecting the CV41 Converter
Connect up to two CC-1 zone controllers to a PS602 amplifier, as shown below.
If the two CC-1 zone controllers are ganged together first, then the CV41
converter is not required.
Connect up to four CC-1 zone controllers to a PS404A or PS604A amplifier, as
shown below. You can also gang any combination of CC-1 zone controllers
together first, then use the CV41 converter to create a single home run to
the amplifier. All inputs on the CV41 converter are identical, so any input
combination is acceptable.
©2022 Bose Corporation, All rights reserved.
Framingham, MA 01701-9168 USA
www.pro.Bose.com
All trademarks are the property of their respective owners
AM771894 Rev. 02
April 2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>