dals SM-STTL20-BK Axis Digital Stick Lamp Installation Guide
- June 11, 2024
- dals
Table of Contents
Installation guide for Guide d’installation pour
AXIS Digital Stick SM-STTL20-BK SM-STFL50-BK
SM-STTL20-BK Axis Digital Stick Lamp
MODEL / MODELE| WATTS| LUMENS| KELVIN| INPUT /
ENTREE| DIMMABLE’
---|---|---|---|---|---
SM-STTL20-BK| 8W| 300 Im| RGB + CCT 2700-6500K| 120VAC| √
SM-STFL50-BK| 16W| 600 Im| RGB + CCT 2700-6500K| 120VAC| √
Dais Connect
To pair your product, follow the steps on the App Pour connecter votre
produit, suivre les &apes sur /’application
ITEMS INCLUDED IN THE BOX
- 20″ table or 50″ floor LED light
- Lamp base Luminaire
- Hardware Accesssoires
ASSEMBLY
Screw the lamp unto the base , put the end cap and plug the adapter into the
wall.
WARRANTY
DALS offers a 5 year warranty from the date of purchase which covers repairs or replacements of defective parts of the housing, optics, and electronics. To contact DALS customer service call 1 877 430 1818 or send an e-mail to [email protected].
FCC COMPLIANCE
FCC STATEMENT
AXIS (DIGITAL) SM-STTL20-BK SM-STFL50-BK
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: —Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver. —Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. —Consult the dealer or an experienced radio/ TV
technician for help.
FCC Radiation Exposure Statement : This equipment complies with FCC
radiation exposure limits set forth for an uncontrolled environment. In order
to avoid the possibility of exceeding the FCC radio frequency exposure limits,
Human proximity to the antenna shall not be less than 20cm (8 inches) during
normal operation
IC COMPLIANCE
CANICES-5(‘)/NMB-5(*) Industry Canada Notice This device contains licence-
exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to
the following two conditions: (1) This device may not cause interference. (2)
This device must accept any interference, Including Interference that may
cause undesired operation of the device
2.Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
ISED RF Exposure statement This equipment complies with ISED radiation
exposure limits set forth for an uncontrolled environment. In order to avoid
the possibility of exceeding the ISED radio frequency exposure limits, Human
proximity to the antenna shall not be less than 20cm (7.9 inches) during
normal operation
1877 430 1818
www.dals.com
INS_STXLXX
Download the free Dals Connect app