TANGMAI N6 Neckband Bluetooth 5.0 Headphones User Manual
- June 4, 2024
- TANGMAI
Table of Contents
N6
User Manual
Manual before operating your device. In order to avoid unnecessary injuries,
please do not Disassemble this product by yourself, and please use a standard
charger.
Product Contains
Product Specification
Driver: 10mm
Support Profile: HFP / AVRCP / A2DP
Charging Time: Up to 60 minutes
Working Voltage: 5V
Standby time: 100 hours
Playtime: Up to 50 hours (60% volume)
Transmission Range: Up to 10m
Working Temperature: -30°C – 70°C
Wight: 28.5 g
Power On
Long press power button for 3 seconds, and the white light on for 1 second.
Power Off
Long press power button for 5 seconds, and the red light on for 1 second.
Bluetooth Pairing
When power off, long press the power button until the white and red light blinks alternatively indicating that N6 is in pairing mode. Turn on the Bluetooth on your cellphone or laptop and open the Bluetooth menu. Select“N6” and connect the device, the white and red light off when you connect the cellphone. The device will automatically turn off if not connected cell phone within 7 minutes.
Dual Pairing
Connect your neckband with Device 1.
Turn on the Bluetooth of Device 1, and connect the neckband with Device 2.
Turn on the Bluetooth of Device 1, both devices will be paired to use.
Product Control
Product Charging
Warranty
The warranty covers your device, including accessories against manufacturing
defects for 1 year from the date of purchase.
Which are not covered in the warranty.
Unauthorized tampering, modifications or repairs of the device.
Physical damage of the device on the account of abuse, handling, storage,
installation, or testing including any use that is not in accordance with the
product manual.
Certification
“This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.”FCC ID: 2A7GB-N6
Safety For You
| Do not expose the device to liquids, moisture, or humidity. It has
electronics and a battery in it. Neither of them likes getting wet.
---|---
| Don’t use abrasive cleaning solvents to clean your device. Wipe them down
with a slightly damp cloth if and when necessary.
| Remove and clean the earbuds tips regularly, to ensure that you always enjoy
the best sound possible from your device.
| Do not expose the device to extremely high or low temperatures as this may
damage the battery or even deform the plastic parts.
| Don’t throw your device in a fire to dispose of it. The internal battery may
explode.
| Don’t try to disassemble your device. There are no user-serviceable parts
inside it.
| Try not to drop your device and keep it away from sharp objects such as keys
in your pockets.
| Only charge your device from 5V USB ports such as phone chargers and laptops
or PCs.
| Never listen to music at high volumes or you may permanently damage your
hearing.
****| Pay attention to your surroundings and never wear any headphones while
riding, driving, or walking in traffic. You do not come with any warranty.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modi? cations to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet the general RF exposure requirements.
The device can be used in portable exposure conditions and compliance with
exposure requirements.