724AEON2B Noir Closed Back Headphones User Guide
- June 11, 2024
- AEON2
Table of Contents
724AEON2B Noir Closed Back Headphones
Features
- Driver: 62mm x 34mm Dan Clark Audio designed single-ended planar magnetic.
- Titanium “Memory Metal” headband.
- Leather comfort strap.
- Synthetic leather ear pads.
- Matched drivers:+/- O.5 dB between 100-7KHz
Safety Instructions
- Read instruction manual carefully and completely before using this headphone.
- Keep the headphone, accessories, and packaging out of reach of pets and children. This product contains small parts which may present a choking hazard.
- Use only attachments, accessories, and spare parts supplied or recommended by Dan Clark Audio.
- Protect your hearing from high volume levels. Permanent hearing damage can occur when headphones are used at high volume levels for extended periods of time.
- Do not expose headphone or accessories to extreme temperatures.
- Always keep headphone dry.
Headphone Fit Adjustments
You can adjust the fit of your headphone by re-positioning the headband
slider. To adjust the headband move the sliders up or down until you achieve
your desired fit. It may be necessary to remove thick glasses or hats to
achieve a proper seal between your head and ear pad. An improper fit can cause
a bad seal resulting in poor bass response.
Tip: Try inserting the arms of your glasses into the top of the ear pad
instead of resting them directly on your ears.
Attaching a Cable
All Dan Clark Audio planar-magnetic products use Hirose-style connectors. To attach your cable hold the male connector by the boot and rotate it into the female receptacle on the headphone until you feel it click into place. To release the cable, pull down on the top of the connector’s metal jacket.
Storing the Cable
Store AEON 2 cable in the cable pouch located underneath the lid of the
compact travel case.
IMPORTANT Cable plug and connectors should always be stored within the
pouch to prevent scratching the headphones
Storing the Headphones
-
Move the sliders up until the leather is against the titanium headband.
-
Place foam block between ear pads. Hold the headphone by the headband with one hand, grip both cups with the other hand as shown. Gently squeeze the cupts to keep them together while folding.
-
Push the cups into the area inside of the headband. The headphones should fold nicely inside.
-
Place headphones into the case as shown.
Product Care
- The synthetic leather ear pads may be cleaned gently with a moistened cloth. Do not use cleaners or protectants, this may damage the pad.
- Clean any other surfaces with a clean, dry, and lint-free microfiber cloth.
- For the first 50-100 hours of use the headphone will ‘burn-in; during this time the sounds will stabalize.
Replacing Ear Pads
This headphone is equipped with our”peelable” ear pad technology so the pads
may be easily removed and swapped for other ear pads to achieve different
fitment or sound signatures.
To remove the pad gently lift the “point” above the cable jack until it
detaches and peel off the baffle. Store unused ear pads on a clean and flat
surface or using waxed paper. If the ear pads lose their”stick” use a
microfiber cloth and alcohol to wipe down the black rubber base of the pad and
the baffle of the headphone and let dry before re-applying the pad.
Carry Case
Your Dan Clark Audio headphones comes with a custom EVA case for protection. There is a pouch inside the case to store your cable and a small amp, DAC, or DAP
Warranty
Dan Clark Audio offers a 2-year warranty for headphones. The warranty
commences on the date of purchase and covers the heaphone cable and
accessories.
Warranty is transferable provided there is documentation of original purchase
that confirms purchaser bought the headphones in their country of residence.
Warranty is void and is non-transferable for”Gray Market” headphones (e.g.
international customers purchasing from US resellers and shipping to a friend
or freight-forward for export to any country with an authorized reseller).
Warranty does not cover damage by the owner (dismantling the unit, dropping,
damage by failure of electronics, etc.) or naturally occurring compression or
other wear to ear pads. Acts of God and all the rest of the usual caveats
apply which reinforce a warranty issue is something Dan Clark Audio did wrong,
or that was instrinsically wrong with the product we received from our
suppliers. We will repair or replace defective goods at our discretion.
Please see http://DanClarkAudio.com for details on return merchandise
authorizations for warranty issues and returns.
Registration
Visit https://DanClarkAudio.com/register to register your product
3366 Kurtz St
Suite 200
San Diego, CA 92110
+ 1 ( 6 1 9) 501 -631 3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>