dals 2004-3K LED Recessed Panel Light Installation Guide
- June 9, 2024
- dals
Table of Contents
dals 2004-3K LED Recessed Panel Light
Product Information
The MODEL 2004-3K and 2006-3K are LED recessed lights with a luminous flux of 770 lm and 1100 lm respectively. The lights consume 11W and 14W of power respectively. These lights are suitable for damp locations and have a color temperature of 3000K. They are also dimmable*.
Please note that the dimming feature may require additional compatible hardware or dimmer switches.
The product comes with a 5-year warranty from the date of purchase that covers the repair or replacement of defective parts of the housing, optics, and electronics. To contact DALS customer service, call 1-877-430-1818 or send an e-mail to [email protected].
Product Usage Instructions
Before you start using the LED recessed light, please follow these steps:
- Ensure that the power source is turned off.
- Verify that the product you received matches the specifications listed in the user manual.
- Read through the user manual carefully before installing or using the product.
- If you have any questions or concerns, please contact DALS customer service for assistance.
To use the LED recessed light:
- Choose a suitable location to install the light, ensuring that it is a damp location as specified in the user manual.
- Cut a hole in the ceiling according to the dimensions provided in the user manual (12 cm or 30 cm).
- Connect the wires according to the wiring diagram provided in the user manual.
- Insert the LED recessed light into the hole and secure it in place using the clips provided.
- Turn on the power source and test the light to ensure it is working properly.
- If you wish to use the dimming feature, please ensure that you have compatible hardware or dimmer switches installed.
For any further questions or assistance, please contact DALS customer service.
Specification
Works with most dimmers. Refer to the DALS website for the dimmer compatibility list.
ITEMS INCLUDED IN THE BOX
SIDE VIEW OF INSTALLATION
BEFORE YOU START
BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE
CIRCUIT BREAKER.
Instructions pertaining to a risk of fire, electric shock, or injury to
persons. Recessed downlight installation requires knowledge of luminaire
electrical systems. Installation should be done by a certified electrician. To
prevent wiring damage or abrasion, do not expose wiring to the edges of sheet
metal or other sharp objects. Suitable for Damp Locations, Energy Star rated,
IC-rated for direct contact with insulation, and ETL certified listed
compliant. This class B digital apparatus complies with Canadian ICES-005.
This digital apparatus does not exceed the Class B limits for radio-noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of the Canadian Department of Communications.
INSTALLATION INSTRUCTIONS
- Drill a hole in the ceiling and prepare supply wires. Install and unshield the line feed wire 6» (15 cm) and strip wires 5/8» (1.6 cm). Bring supply power to the junction box through knockout.
- Open the lid of the junction box. Use the wirenuts to match the white wire from the line feed with the white wire of the junction box, to match the black wire from the line feed with the black wire of the junction box, and to match the copper wire from the line feed and with the green wire of the junction box.
- Route the junction box through the cut-out and connect the recessed LED panel to the junction box with the quick connector.
- Compress the springs and push the fixture in the opening. It is easier to do one spring at a time.
WARRANTY
DALS offers a warranty of 5 years from the date of purchase that covers the repair or replacement of defective parts of the housing, optics, and electronics. To contact DALS customer service call 1-877-430-1818 or send an e-mail to [email protected].