Yuebu R06 Wireless Neckband Bluetooth Headphones User Manual
- June 9, 2024
- Yuebu
Table of Contents
Yuebu R06 Wireless Neckband Bluetooth Headphones
Functional Overview
- The R06 neck-mounted fashionable bluetooth headset supports bluetooth devices such as mobile phones, tablet computers, and laptops;
- Display the current power of Bluetooth on the IOS system;
charging method
- Please use the standard charging cable of this product when charging, and insert the charger into the charging port on the headset
- The red light is always on when charging
- After fully charged, the red light goes out and the blue light is always on
Power on & Shutdown
Power on: Press and hold the button for 3 seconds in the power-off state, the
blue light will turn on, and there will be a power-on prompt tone
Shutdown: In standby/work mode, long press the button for 3 seconds, the
red light will turn on, and the shutdown prompt will sound
Bluetooth pairing
- When the headphone is turned off, press and hold the button until the prompt tone that the Bluetooth function of the headphone is successfully turned on appears, and the headphone prompt light flashes alternately in blue and red
- Turn on the bluetooth device to search for the earphone model R06, click the earphone model to pair, there will be a prompt sound when the pairing is successful, and the blue light flashing of the bluetooth earphone prompt light
key operation
Play/Pause: Short press the button to pause the playback when the music
is playing;
Press the button to resume playback in the paused state
Previous song: long press the button when the music is playing
Next song: long press the button when the music is playing
Volume up: short press the button when playing music
Volume down: short press the button when playing music
Answer/end a call: short press the key once
Reject a call : long press the key for 2 seconds
Product parameters
Item model number: R06
Bluetooth version: V5.1
Working range: ≥10 m
Battery capacity: 180mAh
Frequency range: 20HZ-20KZ
Impedance: 32Ω
Charging time: ≈ 2 hours
Work time: ≈ 13-16 hours
Standby time: 300 hours
Input voltage: 5V
Speaker size: 14MM
Weight ≈ 0.024kg
Precautions
Do not place this product in a high temperature environment;
Do not place this product in water;
Do not throw this product into fire;
Please use the USB cable provided with this product to charge;
Do not leave this product in a charged state for a long time, causing
negligence and affecting the service life;
This product contains lithium ion polymer batteries. It is strictly forbidden
to disassemble the product casing without permission to avoid damage to the
product and may cause damage to the battery or other dangers.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.