Neomounts PLASMA-C100D Signage Display Mount Instruction Manual
- June 9, 2024
- Neomonts
Table of Contents
Neomounts PLASMA-C100D Signage Display Mount
PARTS
How to Install
STEP 1
Install the ceiling plate
STEP 2
- Install the adapter brackets
STEP 3
Attach the VESA plate to the screen and use spacers if necessary.
STEP 4
- Route the cables and place the cover
STEP 5
- Adjust the mount to your desired position and adjust the torque.
Caution
- To ensure safety. please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
- The manufacturer shall not be legally responsible for anv equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
- The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising Out Of human factors or acts Of nature. such as earthquakes or typhoons.
- It is recommended that the mount be installed by qualified personnel onlv_
- At least two persons are needed to install or remove the product to avoid the hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity, or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- 00 not installed in places subject to any shock or vibration.
- 00 not installed in places subject to direct exposure to bright light, as it may cause eve fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation
- To ensure a safe installation, first, check the structure of the wall. ceiling or floor and select a Secure mounting location.
- The wall, ceiling, or floor should be strong enough to sustain a weight Of at least four times Of the display and mount combined. The mounting must be able to withstand earthquakes or Other strong
- Do not modify any accessories or use broken parts. Contact your dealer with any questions,
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall. ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling, or floor type and installation of the mount, the warranty of the prt%duct shall only cover the body of the mount. The warranty of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.
Frequently Asked Questions
What is the Neomounts PLASMA-C100D signage display mount?
The Neomounts PLASMA-C100D is a wall mount for large signage displays, designed for use in commercial or public settings.
What is the weight capacity of the Neomounts PLASMA-C100D?
The Neomounts PLASMA-C100D can support displays up to 100 kg (220 lbs).
What size displays can the Neomounts PLASMA-C100D accommodate?
The Neomounts PLASMA-C100D can accommodate displays ranging from 42 inches to 100 inches.
What is the VESA pattern supported by the Neomounts PLASMA-C100D?
The Neomounts PLASMA-C100D supports VESA patterns up to 800 x 600 mm.
Can the Neomounts PLASMA-C100D be used with curved displays?
No, the Neomounts PLASMA-C100D is designed to be used with flat displays only.
Is the Neomounts PLASMA-C100D easy to install?
Yes, the Neomounts PLASMA-C100D is designed to be easy to install and comes with all the necessary hardware and instructions.
Does the Neomounts PLASMA-C100D allow for easy cable management?
Yes, the Neomounts PLASMA-C100D includes cable management clips to help keep cables organized and out of sight.
Can the Neomounts PLASMA-C100D be adjusted once installed?
Yes, the Neomounts PLASMA-C100D allows for easy tilt adjustment of up to 15 degrees.
Is the Neomounts PLASMA-C100D compatible with all wall types?
No, the Neomounts PLASMA-C100D is designed for use with solid walls only.
Does the Neomounts PLASMA-C100D come with a warranty?
Yes, the Neomounts PLASMA-C100D comes with a 5-year warranty.
Download PDF Link : Neomounts-PLASMA-C100D-Signage-Display- Mount-
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>