dals LEDWALL-A Wall Lamp Installation Guide
- June 10, 2024
- dals
Table of Contents
dals LEDWALL-A Wall Lamp
Installation guide for LEDWALL-A
- Works with most dimmers. Dimming range: 10%-100%. Refer to DALS website for dimmer compatibility list.
ITEMS INCLUDED IN THE BOX
- Fixture
- 2x glass diffuser lens
- Mounting plate
- Aluminum plate and cap
- Mounting hardware
WARRANTY
DALS offers a 5 year warranty from the date of purchase which covers repairs
or replacements of defective parts of the housing, optics, and electronics. To
contact DALS customer service call 1 877 430 1818 or send an e-mail to
[email protected].
BEFORE YOU START
BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE
CIRCUIT BREAKER.
LEDWALL-A
A Instructions pertaining to a risk of fire, electric shock or injury to
persons. Installation must be done according to local electrical codes.
Installation should be done by a certified electrician.
This class B digital apparatus complies with Canadian ICES-005. This digital
apparatus does not exceed the Class B limits for radio-noise emissions from
digital apparatus as set out in the Radio Interference Regulations of the
Canadian Department of Communications
- Make electrical connections. (see connection details)
- Fasten the the mounting bracket to the junction box.
- Dimensions: 3.61″ x 3.61″ x 1.59″.
- Connect the mounting bracket to the fixture with the quick connectors.
- Mount the fixture onto the mounting bracket and secure in place using provided screws
Install black aluminum plate + aluminum cap for a down light only
dals
Tel: 1 877 430 1818
Website: www.dals.com
INS_LEDWALL-A….REV7