DAEWOO 50DM55UQP Colour Television with Remote Control User Manual

: June 10, 2024
: Daewoo

50DM55UQP Colour Television with Remote Control

Safety Information

Before using the TV, please read the safety information section in the user manual to prevent any accidents.

Markings on the Product

The TV has markings on it that indicate its power rating, voltage, and other important information. Refer to the user manual for more details.

Introduction

This section provides a brief introduction to the TV and its features.

Accessories Included

The TV comes with a remote control, batteries, power cord, and instruction manual.

Features

The TV has features such as video playback, audio playback, picture display, subtitle support, and support for various DVI resolutions.

Stand Installation & Wall Mounting

The TV can be installed with a stand or mounted on a wall. Refer to the user manual for instructions on how to install the stand or mount the TV on a wall.

Video

The TV supports video playback.

Audio

The TV supports audio playback.

Picture

The TV supports picture display.

Subtitle

The TV supports subtitle display.

Supported DVI Resolutions

The TV supports various DVI resolutions. Refer to the user manual for more details.

Specification

The user manual contains detailed specifications of the TV.

Licences

The TV may have licenses for certain features. Refer to the user manual for more details.

Disposal Information

The user manual provides information on how to dispose of the TV properly.

Antenna Connection

The TV can be connected to an antenna. Refer to the user manual for instructions on how to connect the antenna.

Other Connections

The TV has other connections such as HDMI, USB, and Ethernet. Refer to the user manual for instructions on how to use these connections.

Turning On/Off the TV

The TV can be turned on/off using the power button on the TV or the remote control. Refer to the user manual for more details.

TV Control & Operation

The user manual provides instructions on how to operate the TV using the buttons on the TV or the remote control.

Remote Control

The TV comes with a remote control that can be used to operate the TV. Refer to the user manual for instructions on how to use the remote control.

Initial Setup Wizard

The TV has an initial setup wizard that guides users through the setup process. Refer to the user manual for more details.

Home Screen

The home screen displays various options such as Live TV, Channels, Recordings, and Settings. Refer to the user manual for more details.

The Live TV mode menu content includes options such as Channels, TV Options, Record, and Settings. Refer to the user manual for more details.

Channels

The TV has various channel options. Refer to the user manual for more details.

TV Options

The TV options include settings such as picture, sound, and network settings. Refer to the user manual for more details.

Record

The TV can record programs. Refer to the user manual for
instructions on how to record programs.

Settings

The TV has various settings such as picture, sound, network, and device preferences. Refer to the user manual for more details.

Network & Internet

The TV can be connected to the internet. Refer to the user manual for instructions on how to connect to the internet.

Channel List

The channel list displays all available channels. Refer to the user manual for more details.

Programme Guide

The programme guide displays information about programs. Refer to the user manual for more details.

Connecting to the Internet

The TV can be connected to the internet using Wi-Fi or Ethernet.Refer to the user manual for instructions on how to connect to the internet.

Multi Media Player

The TV has a multimedia player that can play media files from USB or mobile devices. Refer to the user manual for more details.

USB Recording

The TV can record programs to a USB device. Refer to the user manual for instructions on how to record programs to a USB device.

Instant Recording

The TV can do instant recording. Refer to the user manual for more details.

Watching Recorded Programmes

The TV can play recorded programs. Refer to the user manual for instructions on how to play recorded programs.

Timeshift Recording

The TV can do timeshift recording. Refer to the user manual for more details.

Disk Format

The TV supports various disk formats. Refer to the user manual for more details.

Schedule List

The schedule list displays scheduled programs. Refer to the user manual for more details.

CEC

The TV supports CEC. Refer to the user manual for more details.

Google Cast

The TV supports Google Cast. Refer to the user manual for more details.

Product Usage Instructions: TV

Read the safety information section in the user manual before using the TV.
Refer to the user manual for instructions on how to install the stand or mount the TV on a wall.
Connect the TV to an antenna using the instructions provided in the user manual.
Connect other devices such as HDMI, USB, or Ethernet using the instructions provided in the user manual.
Turn on/off the TV using the power button on the TV or the
remote control.
Use the buttons on the TV or the remote control to operate the TV.
Use the initial setup wizard to guide you through the setup process.
Use the home screen to access various options such as Live TV, Channels, Recordings, and Settings.
Use the Live TV mode menu content to access options such as Channels, TV Options, Record, and Settings.
Use the channel list to view available channels and the programme guide to view program information.
Connect the TV to the internet using Wi-Fi or Ethernet using the instructions provided in the user manual.
Use the multimedia player to play media files from USB or mobile devices.
Use USB recording to record programs to a USB device.
Use instant recording to do instant recording.
Use timeshift recording to do timeshift recording.
Play recorded programs using the instructions provided in the user manual.
Use the schedule list to view scheduled programs.
Refer to the user manual for instructions on how to use CEC and Google Cast.

English – 1 –

Safety Information

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
In extreme weather (storms, lightning) and long inactivity periods (going on holiday) disconnect the TV set from the mains.
The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable. If the TV set is not disconnected electrically from the mains, the device will still draw power for all situations even if the TV is in standby mode or switched o .
Note: Follow the on screen instructions for operating the related features.
IMPORTANT – Please read these instructions fully before installing or operating
WARNING: This device is intended to be used by persons (including children) who are capable / experienced of operating such a device unsupervised, unless they have been given supervision or instruction concerning the use of the device by a person responsible for their safety. · Use this TV set at an altitude of less than 5000 meters
above the sea level, in dry locations and in regions with moderate or tropical climates. · The TV set is intended for household and similar indoor use but may also be used in public places. · For ventilation purposes, leave at least 5cm of free space around the TV. · The ventilation should not be impeded by covering or blocking the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. · The power cord plug should be easily accessible. Do not place the TV, furniture, etc. on the power cord. A damaged power cord/plug can cause fire or give you an electric shock. Handle the power cord by the plug, do not unplug the TV by pulling the power cord. Never touch the power cord/plug with wet hands as this could cause a short circuit or electric shock. Never make a knot in the power cord or tie it with other cords. When damaged it must be replaced, this should only be done by qualified personnel. · Do not expose the TV to dripping or splashing of liquids and do not place objects filled with liquids, such as vases, cups, etc. on or over the TV (e.g., on shelves above the unit).

· Do not expose the TV to direct sunlight or do not place open ames such as lit candles on the top of or near the TV.
· Do not place any heat sources such as electric heaters, radiators, etc. near the TV set.
· Do not place the TV on the floor and inclined surfaces.
· To avoid danger of su ocation, keep plastic bags out of the reach of the babies, children and domestic animals.
· Carefully attach the stand to the TV. If the stand is provided with screws, tighten the screws firmly to prevent the TV from tilting. Do not over-tighten the screws and mount the stand rubbers properly.
· Do not dispose of the batteries in fire or with hazardous or ammable materials.
WARNING
· Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
· Excessive sound pressure from earphones or headphones can cause hearing loss.
ABOVE ALL – NEVER let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the case.

Caution

Serious injury or death risk

Risk of electric shock Dangerous voltage risk

Maintenance

Important maintenance component

Markings on the Product

The following symbols are used on the product as a marker for restrictions and precautions and safety instructions. Each explanat on shall be cons dered where the product bears related mark ng only. Note such information for security reasons.

Class II Equipment: This appliance is designed in such a way that it does not require
a safety connection to electrical earth.

Hazardous Live Terminal: The marked terminal(s) is/are hazardous live under normal
operating conditions.

Caution, See Operating Instructions: The marked area(s) contain(s) user replaceable coin or button cell batteries.

Class 1 Laser Product: This product contains Class 1 laser source that is safe under reasonably foreseeable condi-
tions of operation.

English – 2 –

WARNING
Do not ingest the battery, Chemical Burn Hazard This product or the accessories supplied with the product may contain a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
A television may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: · ALWAYS use cabinets or stands or mounting
methods recommended by the manufacturer of the television set. · ALWAYS use furniture that can safely support the television set. · ALWAYS ensure the television set is not overhanging the edge of the supporting furniture. · ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls. · ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed. · NEVER place a television set in an unstable location. · NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support. · NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture. · NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed. · The equipment is only suitable for mounting at heights 2 m. If the existing television set is going to be retained and relocated, the same considerations as above should be applied.
Apparatus connected to the protective earthing of the building installation through the MAINS connection or through other apparatus with a connection to protective earthing and to a television distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection to a television distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range (galvanic isolator)

WALL MOUNTING WARNINGS

· Read the instructions before mounting your TV on the wall.
· The wall mount kit is optional. You can obtain from your local dealer, if not supplied with your TV.
· Do not install the TV on a ceiling or on an inclined wall.
· Use the specified wall mounting screws and other accessories.
· Tighten the wall mounting screws firmly to prevent the TV from fall. Do not over-tighten the screws.
Figures and illustrations in this user manual are provided for reference only and may di er from the actual product appearance. Product design and specifications may be changed without notice.

English – 3 –

Introduction
Thank you for choosing our product. You’ll soon be enjoying your new TV. Please read these instructions carefully. They contain important information which will help you get the best from your TV and ensure safe and correct installation and operation.
Accessories Included
· Remote Control · Batteries: 2 x AAA · Instruction Book
Features
· Remote controlled colour TV · AndroidTM operating system · Google Cast · Voice Search (optional) · Fully integrated digital terrestrial/cable/satellite TV
(DVB-T-T2/C/S-S2) · HDMI inputs to connect other devices with HDMI
sockets · USB input · Stereo sound system · Teletext · Headphone connection · Automatic programming system · Manual tuning · Sleep timer · On/O timer · Switch o timer · Picture o function · No signal auto power o function · Ethernet (LAN) for Internet connectivity and service
· 802.11 a/b/g/n/ac built in WLAN Support · HbbTV Ultra HD (UHD) TV supports Ultra HD (Ultra High Definition – also known as 4K) which provides resolution of 3840 x 2160 (4K:2K). It equals 4 times the resolution of Full HD TV by doubling the pixel count of the Full HD TV both horizontally and vertically. Ultra HD contents are supported from HDMI, some of the Over-the-Top (OTT) services, USB inputs and over DVB-T2 and DVB-S2 broadcasts.

High Dynamic Range (HDR) / Hybrid LogGamma (HLG)
Using this feature the TV can reproduce greater dynamic range of luminosity by capturing and then combining several di erent exposures. HDR/HLG promises better picture quality thanks to brighter, more realistic highlights, more realistic colour and other improvements. It delivers the look that filmmakers intended to achieve, showing the hidden areas of dark shadows and sunlight with full clarity, colour and detail. HDR/HLG contents are supported via native and market applications, HDMI, USB inputs and over DVB-S broadcasts. When the input source is set to the related HDMI input press the Menu button and set the HDMI EDID Version option in the TV Options>Settings>Device Preferences>Inputs menu as EDID 2.0 or Auto EDID in order to watch HDR/HLG content, if the HDR/HLG content is received through an HDMI input. The source device should also be at least HDMI 2.0a compatible in this case.
Dolby Vision
Dolby VisionTM delivers a dramatic visual experience, astonishing brightness, exceptional contrast, and vivid colour, that brings entertainment to life. It achieves this stunning image quality by combining HDR and wide colour gamut imaging technologies. By increasing the brightness of the original signal and using a higher dynamic colour and contrast range, Dolby Vision presents amazing true-to-life images with stunning detail that other post-processing technologies in the TV aren’t able to produce. Dolby Vision is supported via native and market applications, HDMI and USB inputs. When the input source is set to the related HDMI input press the Menu button and set the HDMI EDID Version option in the TV Options>Settings>Device Preferences>Inputs menu as EDID 2.0 or Auto EDID in order to watch Dolby Vision content, if the Dolby Vision content is received through an HDMI input. The source device should also be at least HDMI 2.0a compatible in this case. In the Picture Mode menu two predefined picture modes will be available if Dolby Vision content is detected: Dolby Vision Bright and Dolby Vision Dark. Both allow the user to experience the content in the way the creator originally intended with di erent ambient lighting conditions. To change the Picture Mode setting press the Menu button while watching the Dolby Vision content and go to Picture menu. While watching Dolby Vision Content via an application, except YouTube, Net ix and Multi Media Player, you will not be able to access the Picture menu and set the Picture Mode.

English – 4 –

Stand Installation & Wall Mounting
Assembling / Removing the pedestal
Preparations
Take out the pedestal(s) and the TV from the packing case and put the TV onto a work table with the screen panel down on the clean and soft cloth (blanket, etc.)
· Use a at and firm table bigger than the TV.
· Do not hold the screen panel part.
· Make sure not to scratch or break the TV.
Assembling the pedestal
1. Place the stand(s) on the stand mounting pattern(s) on the rear side of the TV.
2. Insert the screws provided and tighten them gently until the stand is properly fitted.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall- hanging bracket or repacking the TV.
· Put the TV onto a work table with the screen panel down on the clean and soft cloth. Leave the stand(s) protruding over the edge of the surface.
· Unscrew the screws that fix the stand(s).
· Remove the stand(s).
When using the wall mount bracket
Your TV is also prepared for a VESA-compliant wall mount bracket. If it is not supplied with your TV, contact your local dealer to purchase the recommended wallhanging bracket.
Holes and measurements for wall mount bracket installation;

Antenna Connection
Connect the aerial or cable TV plug to the AERIAL INPUT (ANT) socket located on the left side of the TV or satellite plug to the SATELLITE INPUT (LNB) socket located on the rear side of the TV. Rear side of the TV

/1%
1. Satellite Left side of the TV
$17

2. Aerial or cable If you want to connect a device to the TV, make sure that both the TV and the device are turned o before making any connection. After the connection is done, you can turn on the units and use them.

Other Connections

If you want to connect a device to the TV, make sure that both the TV and the device are turned o before making any connection. After the connection is done, you can turn on the units and use them.

Connector

Type

HDMI Connection (back&side)

SPDIF

SPDIF (Optical Out) Connection
(back)

HEADPHONE

Headphone Connection
(back)

LAN

USB Connection
(side)
CI Connection
(side)
Ethernet Connection
(back)

Cables LAN / Ethernet Cable

Device
CAM module

When using the wall mounting kit (contact your dealer to purchase one, if not supplied), we recommend that you plug all your cables into the back of the TV before mounting on the wall. Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings. The USB inputs on the TV support devices up to 500mA. Connecting devices that have current value above 500mA may damage your TV. When connecting equipment using a HDMI cable to your 79WRJXDUDQWHHVXFLHQWLPPXQLW against parasitic frequency radiation and trouble- free transmission of high GH¿QLWLRQ VLJQDOV VXFK DV . FRQtent, you have to use a high speed shielded (high grade) HDMI cable with ferrites.

VESA WALL MOUNT MEASUREMENTS

Hole a ern

Sizes (mm)

200

Screw Sizes

min. (mm)

Length (X)

max. (mm)

Thread (Y)

English – 5 –

English – 6 –

Turning On/Off the TV
Connect power
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz socket.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.
Plug the power cable to the mains socket outlet. The TV will switch on automatically.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights up. To switch on the TV from standby mode either:
· Press the Standby button on the remote control.
· Press the control button on the TV.
The TV will then switch on.
To switch the TV into standby
The TV cannot be switched into standby mode via control button. Press and hold the Standby button on the remote control. Power o dialogue will appear on the screen. Highlight OK and press the OK button. The TV will switch into standby mode.
To switch o the TV
To power down the TV completely, unplug the power cord from the mains socket.
Quick Standby Mode
In order to switch the TV into quick standby mode either;
· Press the Standby button on the remote.
Press again to go back to operating mode.
· Press the control button on the TV.
Press the control button again to go back to operating mode.
Your TV continues to operate in the quick standby mode state, as it regularly checks for updates. This is not a malfunction, it meets the requirements for energy consumption. In order to minimize energy consumption switch your TV into standby mode as explained above.

TV Control & Operation

The control button allows you to control the Quick Standby-On functions of the TV. Note: 7KHSRVLWLRQRIWKHFRQWUROEXWWRQPDGLHUGHSHQGLQJ on the model. To turn the TV o (Quick Standby): Press the control button to turn the TV into quick standby mode. To turn the TV o (Standby): The TV cannot be switched into standby mode via control button. To turn on the TV: Press the control button, the TV will turn on. Note: Live TV settings menu OSD in Live TV mode cannot be displayed via the control button. Operation with the Remote Control Press the Menu button on your remote control to display Live TV settings menu when in Live TV mode. Press Home button to display or return to the Home Screen of the Android TV. Use the directional buttons to move the focus, proceed, adjust some settings and press OK to make selections in order to make changes, set your preferences, enter a sub-menu, launch an application etc. Press Return/Back to return to the previous menu screen. Input Selection Once you have connected external systems to your TV, you can switch to di erent input sources. Press the Source button on your remote control consecutively or use the directional buttons and then press the OK button to switch to di erent sources when in Live TV mode. Or enter the Inputs menu on the Home Screen, select the desired source from the list and press OK. Changing Channels and Volume You can adjust the volume by using the Volume +/- buttons and change the channel in Live TV mode by using the Programme +/- buttons on the remote.

Remote Control

Inserting the Batteries into the Remote
Remove the screw that secures the battery compartment cover on the back side of the remote control first. Lift the cover gently. Insert two 1.5V – size AAA batteries. Make sure the (+) and (-) signs match (observe correct polarity). Do not mix old and new batteries. Replace only with same or equivalent type. Place the cover back on. Then screw the cover back on again.
Standby Button
Press and hold the Standby button on the remote control. Power o dialogue will appear on the screen. Highlight OK and press the OK button. The TV will switch into standby mode. Press brie y and release to switch the TV into quick standby mode or to switch on the TV when in quick standby or standby mode.

1. Standby: Quick Standby / Standby / On 2. Numeric buttons: Switches the channel in Live TV
mode, enters a number or a letter in the text box on the screen
3. Language: Switches among sound modes (analogue TV), displays and changes audio language (digital TV, where available)
4. Home: Opens the Home Screen 5. Mute: Completely turns o the volume of the TV 6. Volume +/7. Guide: Displays the electronic programme guide in
Live TV mode
8. Directional buttons: Navigates menus, setting options, moves the focus or cursor etc., sets record time and displays the subpages in Live TV-Teletext mode when pressed Right or Left. Follow the on-screen instructions.
9. OK: Confirms selections, enters sub-menus, views channel list (in Live TV mode)
10. Back/Return: Returns to previous menu screen, goes one step back, closes open windows, closes teletext (in Live TV-Teletext mode)
11. Net ix: Launches the Net ix application 12. Menu: Displays Live TV Settings menu (in Live TV
mode), displays available setting options such as sound and picture
13. Stop: Stops the media being played 14. Rewind: Moves frames backwards in media such as
movies
15. Record: Records programmes in Live TV mode 16. Coloured Buttons: Follow the on-screen instructions for
coloured button functions
17. Text: Opens and closes teletext (where available in Live TV mode)
18. Pause: Pauses the media being played, starts timeshift recording in Live TV mode
Play: Starts to play selected media 19. Fast forward: Moves frames forward in media such
as movies
20. MyButton1: Opens the picture mode setting menu on available sources
21. YouTube: Launches the YouTube application 22. Exit: Closes and exits from Live TV Settings menus,
closes the Home Screen, exits from any running application or menu or OSD banner, switches to last set source
23. Info: Displays information about on-screen content 24. Source: Shows all available broadcast and content
sources, closes the Home Screen and switches to last set source
25. Programme +/-: Increases/Decreases channel number in Live TV mode
26. Subtitles: Turns subtitles on and o (where available)

English – 7 –

English – 8 –

Initial Setup Wizard

Note: Follow the on-screen instructions to complete the initial setup process. Use the directional buttons and the OK button RQWKHUHPRWHWRVHOHFWVHWFRQ¿UPDQGSURFHHG
When turned on for the first time, a welcome screen will be displayed. Select your language and press OK. Follow the on-screen instructions to setup your TV and install channels. The installation wizard will guide you through the setup process. You can perform initial setup anytime using the Reset option in the Settings>Device Preferences menu. You can access the Settings menu from the Home screen or from the TV options menu in Live TV mode.
1. Welcome Message and Language Selection
“Welcome” message will be displayed along with the language selection options listed on the screen. Select the desired language from the list and press OK to continue.
2. Country
In the next step select your Country from the list and press OK to continue.
3. Initial Setup
After the country selection you can start the initial setup wizard. Highlight Continue and press OK to proceed. You will not be able go back and change the language and country once you proceed. If you need to change your language or country selection after this step, you will have to switch the TV into standby mode so the setup process starts from the beginning when you next switch on the TV. In order to do this, press and hold the Standby button. A dialogue will be displayed. Highlight OK and press OK.
4. Search for accessories
A search for accessories will be performed after the initial setup has started. Follow the on-screen instructions to pair your remote control (depends on the model of the remote control) and other wireless accessories with your TV. Press Back/Return button to end adding accessories and proceed.
5. Quick Setup
If you didn’t priorly connect your TV to the Internet via Ethernet a screen will be displayed where you can transfer your Android phone’s WLAN network and Google Account to your TV. Highlight Continue and press OK to proceed. Follow the on-screen instructions on your TV and your phone to complete the process. You can also skip this step by selecting Skip option. Some steps may be skipped depending on the settings made in this step.
If you did priorly connect your TV to the Internet via Ethernet a message will be displayed stating that you are connected. You can choose to continue with wired connection or change the network. Highlight Change

network and press OK if you want to use wireless connection instead of wired connection.
6. Network Connection
You will be directed to the next step automatically, if you connect your TV to internet via Ethernet at this point. If not, available wireless networks will be searched and listed on the next screen. Select your WLAN network from the list and press OK to connect. Enter the password using the virtual keyboard if the network is password protected. Select the Other network option from the list, if the network that you want to connect has hidden SSID.
If you prefer not to connect to the Internet at this point you can skip this step by selecting Skip option. You can connect to internet later using the Network & Internet menu options in the Settings menu from the Home Screen or from the TV options menu in Live TV mode.
This step will be skipped if internet connection has been established in the previous step.
7. Sign in to your Google account
If connection succeeds, you can sign in to your Google account on the next screen. You need to be signed in to a Google account in order to use Google services. This step will be skipped if no internet connection has been established in the previous step or if you already signed in to your Google account in Quick Setup step.
By signing in, you will be able to discover new apps for videos, music and games on Google Play; get personalised recommendations from apps like YouTube; buy or rent the newest movies and shows on Google Play Movies & TV; access your entertainment and control your media. Highlight Sign In and press OK to proceed. You can sign in to your Google account by entering your e-mail address or phone number and your password. You can also create a new account.
If you prefer not to sign in to your Google account at this point you can skip this step by selecting Skip option.
8. Terms of Service
Terms of Service screen will be displayed next. By continuing, you will agree to the Google Terms of Service, the Google Privacy Policy and the Google Play Terms of Service. Highlight Accept and press OK on the remote to confirm and proceed. You can also view Terms of Service, Privacy Policy and Play Terms of Service on this screen. To display the content an internet connection is needed. A message will be displayed mentioning the web site address on which this information can also be viewed, in case internet access is not available.
9. Location
On the next screen, you can allow or disallow Google and third party apps to use your TV’s location information. Select Yes to confirm and press OK. To skip this

English – 9 –

step without confirmation, select No and proceed by pressing the OK button. You can change this setting later using the Settings>Device Preferences>Location menu on the Home Screen.
10. Help improve Android
Automatically send diagnostic information to Google, like crash reports and usage data from your device and apps. This information won’t be used to identify you. Select Yes to confirm and press OK. To skip this step without confirmation, select No and proceed by pressing the OK button. You can change this setting later using the Settings>Device Preferences>Usage & Diagnostics menu on the Home Screen.
Information on Google services and some features of your TV will be displayed next. You can turn on personal results for Assistant by choosing the related option when prompted. Press OK consecutively to proceed.
11. Password
Depending on the country selection you made in the earlier steps, you may be asked to define a password (PIN) at this point. Press OK to proceed. The selected PIN cannot be 0000. This PIN will be required in order to access some menus, contents or to release locked channels, sources etc. You will have to enter it if you are asked to enter a PIN for any menu operation later.
12. Parental controls
Depending on your earlier selections you may be asked to set your parental control preference in the next step. You can block programmes according to their age rating information by selecting one of the related options or you can turn this function o by selecting the O option. Highlight your selection and press OK or Right directional button to continue.
13. Select TV Mode
In the following step of the initial setup, you can set the TV’s operation mode either as Home or as Store. Store option will configure your TV’s settings for store environment. This option is intended only for store use. It is recommended to select Home for home use.
14. Chromecast built-in always available
Select your chromecast availability preference. If set as On your TV will be detected as a Google Cast device and allow Google Assistant and other services to wake your TV up to respond to Cast commands, even when on standby mode and the screen is o .
15. Tuner Mode
Note: If you don’t want to perform a tuner scan, select one of the available options anyway. You can skip the scan at some later stage of the installation wizard. If you skip this step you can perform a channel search later using the related Channels menu options.
The next step is the selection of the tuner mode. Select your tuner preference to install channels for Live TV function. Antenna/Aerial, Cable and Satellite options

are available. Highlight the option that corresponds to your environment and press OK or Right directional button to proceed.
Antenna/Aerial
If Antenna/Aerial option is selected, the TV will search for digital terrestrial and analogue broadcasts. On the next screen highlight Scan option and press OK to start the search or select Skip Scan to continue without performing a search.
Note: If the country selected does not have analogue broadcasts, the analogue search option may not be available.
Cable
If Cable option is selected, the TV will search for digital cable and analogue broadcasts. If any, available operator options will be listed on the Select Operator screen. Otherwise this step will be skipped. You can select only one operator from the list. Highlight the desired operator and press OK or the Right directional button to proceed. On the next screen select Scan option to start a search or select Skip Scan to continue without performing a search. If Scan is selected a configuration screen will be displayed next. Scan Mode, Frequency(KHz), Modulation, Symbol Rate(Ksym/s), Network ID options may need to be set. To perform a full scan set the Scan Mode as Full/Advance if available. Depending on the selected operator and/or Scan Mode some options may not be available to be set.
Note: If the country selected does not have analogue broadcasts, the analogue search option may not be available.
Once you are done with setting available options, press the Right directional button to proceed. The TV will start to search available broadcasts.
Satellite
If Satellite option is selected, Satellite Type screen will be displayed next. Preferred Satellite and General Satellite options will be available. Select one and press OK to proceed.
Note: Preferred Satellite and General Satellite options may not be available depending on the selected country. In this case the ‘9%6 &RQ¿JXUDWLRQ 6HWWLQJ screen will be displayed after selecting the tuner mode as Satellite.
If Preferred Satellite option is selected, next screen will be Select Operator screen. You can select only one operator from the list. Highlight the desired operator and press OK or the Right directional button to proceed. Some of the following options may be preset depending on the selected operator in this step. Check the parameters before proceeding and adjust if necessary.
The first of the DVBS Con guration Setting screens will be displayed next. First antenna type should be set. Direct, Single Cable, DiSEqC 1.0 and DiSEqC 1.1 options are available. Highlight the antenna type that

English – 10 –

corresponds to your satelite system and press OK or the Right directional button to proceed to the next step.
Depending on the country and antenna type selections you made in the earlier steps of the initial setup process, Load Preset List screen may be displayed next. Highlight Load Preset List and press OK or the Right directional button to proceed with the SatcoDX installation. You can also skip this step by selecting Skip option.
After selecting the antenna type and preset list installation preference, configure the parameters on the second DVBS Con guration Setting screen according to your environment. You may be able to set up di erent satellites depending on the selected antenna type and operator in the previous steps. The satellite options are named di erently depending on the antenna type. Direct, Satellite Position or DiSEqC options may be available. Highlight the desired satellite option and press OK. Then select the satellite for that option from the list of available satellites. After you completed the configuration changes, press the Right directional button to proceed.
If Load Preset List option is selected in the previous step next steps will be skipped and the preset channel list installation will start. If the correct satellite has not been selected for SatcoDX installation, a warning dialogue will be displayed on the screen. The satellite/s that can be selected will be listed. Press OK to close the dialogue and then set the satellite accordingly.
Select Operation screen will be displayed next. Select Scan and press OK or the Right directional button to proceed with the scanning configurations. Select Skip Scan to proceed without performing a scan and complete the initial setup.
DVBS Scan Configure screen will be displayed next if Scan option is selected. Following options will be available: Scan Mode and Channels. You can choose to perform a full scan or a network scan. Set the Scan Mode accordingly. If you are going to perform a network scan, make sure that you have selected the correct transponder under the Reference Transponder option on the second of the DVBS Configuration Setting screens or adjusted the Frequency, Symbol Rate (Ksym/s) and Polarisation parameters accurately using the User De ned option. You may not be able to change the Scan mode setting depending on the previous selections. If the Channels option is set as Free encrypted channels will not be installed. Additional options may also be available depending on the selected operator, configure these settings according to your preferences. Once you are done with setting the available options, press the Right directional button to start scan while Scan Mode or Channels is highlighted.
While the search continues you can press the Back/ Return button twice, highlight Skip Scan and press

OK or Right directional button to stop the search. The channels that have already been found will be stored in the channel list.
When the initial setup is completed a message will be displayed. Press OK to finish the setup.
You will be asked to give your consent to the collection of your usage data. Read the text on the screen for detailed information. Highlight Accept and press OK to give your consent and proceed. To skip without giving your consent, select Skip. You can change this setting later using the Settings>Device Preferences>Manufacturer Usage & Diagnostics menu on the Home Screen.
Home Screen will be displayed. You can press the Exit button on the remote or highlight Live TV app and press OK to switch to Live TV mode and watch TV channels.
Home Screen
To enjoy the benefits of your Android TV, your TV must be connected to the Internet. Connect the TV to a home network with a high-speed Internet connection. You can connect your TV wirelessly or wired to your modem/router. Refer to the Network & Internet and Connecting to the Internet sections for further information on how to connect your TV to the internet.
The Home menu is the centre of your TV. Press the Home button to display Home Screen. From the Home menu you can start any application, switch to a TV channel, watch a movie or switch to a connected device. Depending on your TV setup and your country selection in the initial setup the Home menu may contain di erent items.
The available options of the Home Screen are positioned in rows. To navigate through the Home Screen options use the directional buttons on the remote. Apps, YouTube, Google Play Movies & TV, Google Play Music and Google Play related rows and rows of the applications you have installed might be available. Select a row then move the focus to the desired item in the row. Press OK button to make a selection or to enter a sub-menu.
On the upper left of the screen, search tools will be located. You can choose either to type a word to start a search via the virtual keyboard or try voice search option if your remote has a built-in microphone. Move the focus to the desired option and press OK to proceed.
On the upper right of the screen, Noti cations, Inputs, Network & Internet (will be named as Connected or Not Connected according to the current connection status), Settings and the current time will be displayed. You can configure your date and time preferences

English – 11 –

using the Date & time menu options from the Settings>Device Preferences menu.
First row will be the Apps row. Live TV and Multi Media Player apps will be available alongside with other apps. Highlight Live TV and press OK to switch to Live TV mode. If the source was set to an option other than TV previously, press the Source button and set as TV in order to watch live TV channels. Highlight Multi Media Player and press OK to browse the connected USB devices or media servers and play/ display the installed media content on the TV. The audio files can be played through the speakers of the TV or through the speaker systems connected to the TV. You can configure your sound output preference from the Speakers option in the Settings>Device Preferences>Sound menu. To browse the internet, you will need an internet browser application. Make a search or launch the Google Play app, find a browser and download it.
Live TV Mode Menu Content
Switch the TV to Live TV mode first and then press the Menu button on the remote to see Live TV menu options. To switch to Live TV mode you can either press the Exit button or highlight the Live TV app from the Apps row and press OK on the Home Screen.
Channels
Add to My Favourites: Add the channel that is currently being watched to the previously selected favourite list.
Programme Guide: Open the electronic programme guide. Refer to the Programme Guide section for detailed information.
New Channels Available: Start a search for new channels. Select the channel source application or tuner. Then make the settings according to your environment and preferences if necessary. You can use the Channel menu options to search for broadcast channels. Refer to the Channel section for more information. When complete highlight Done and press OK.
TV Options
Source: Display the list of input sources. Select the desired one and press OK to switch to that source.
Picture Mode: Set the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: User, Standard, Vivid, Sport, Movie and Game. You can use User mode to create customised settings. Go to Settings>Device Preferences>Picture for detailed setting options.
Display Mode: Set the aspect ratio of the screen. Select one of the predefined options according to your preference.

Speakers: To hear the TV audio from the connected compatible audio device set as External Audio System. Set as TV Speakers to use the speakers of your TV for sound output.
Power
Sleep Timer: Define an idle time after which you want your TV to enter sleep mode automatically.
Picture o : Select th s opt on and press OK to turn the screen o . Press a button on the remote or on the TV to turn the screen on again. Note that you can not turn the screen on via the Volume +/-, Mute and Standby buttons. These buttons will function normally.
No Signal Auto Power O : Set the behaviour of the TV, when no signal is detected from the currently set input source. Define a time after which you want your TV to turn itself o or set as O to disable.
CI Card: Display available menu options of the CI card in use. This item may not be available depending on the input source setting.
Advanced Options
Audio Language: Set your language preference for audio. This item may not be available depending on the input source setting.
Blue Mute: Turn this function on/o according to your preference. When turned on, blue background will be displayed on the screen when no signal is available.
Default Channel: Set your default startup channel preference. When the Select Mode is set as User Select, Show Channels option will become available. Highlight and press OK to see channel list. Highlight a channel and press OK to make a selection. Selected channel will be displayed, every time the TV is turned back on from any standby mode. If the Select Mode is set as Last Status, the last watched channel will be displayed.
Interaction Channel: Turn the Interaction Channel function on or o . This feature is useful in the UK and Ireland only.
MHEG PIN Protection: Turn the MHEG PIN protection function on or o . This setting enables or disables access some of the MHEG applications. Disabled applications can be released by entering the right PIN. This feature is useful in the UK and Ireland only.
HBBTV Settings
HBBTV Support: Turn the HBBTV function on or o .
Do Not Track: Set your preference regarding the tracking behaviour for HBBTV services.
Cookie Settings: Set your cookie setting preference for HBBTV services.

English – 12 –

Persistent Storage: Turn the Persistent Storage function on or o . If set as On cookies will be stored with an expiry date in the persistent memory of the TV.
Block Tracking Sites: Turn the Block Tracking Sites function on or o .
Device ID: Turn the Device ID function on or o .
Reset Device ID: Reset the device ID for HBBTV services. Confirmation dialogue will be displayed. Press OK to proceed, Back to cancel.
Subtitle
Analogue Subtitle: Set this option as O , On or Mute. If Mute option is selected, the analogue subtitle will be displayed on the screen but the speakers will be muted simultaneously.
Digital Subtitle: Set this option as O or On.
Subtitle Tracks: Set your subtitle track preference, if any available.
Digital Subtitle Language: Set one of the listed language options as first digital subtitle language preference.
Second Digital Subtitle Language: Set one of the listed language options as second digital subtitle language preference. If the selected language in the Digital Subtitle Language option is not available, the subtitles will be displayed in this language.
Subtitle Type: Set this option as Normal or Hearing Impaired. If Hearing Impaired option is selected, it provides subtitle services to deaf and hard of hearing viewers with additional descriptions.
Teletext
Digital Teletext Language: Set the teletext language for digital broadcasts.
Decoding Page Language: Set the decoding page language for teletext display.
BISS Key: “Click To Add Biss Key” message will be displayed. Press OK button to add a biss key. Frequency, Symbol Rate (KSym/s), Polarisation, Programme ID and CW Key parameters will be available to be set. Once you are done with the settings highlight Save Key and press OK to save and add the biss key. This option will not be available if the Channel Installation Mode under the Settings>Channel menu is not set as Preferred Satellite, General Satellite or Satellite. Available options will di er depending on the selected country during the initial setup process.
Auto Sleep: Define an idle time after which you want your TV to enter sleep mode automatically. 4 Hours, 6 Hours and 8 Hours options are available. Set as Never to disable.

System Information: Display detailed system information on the current channel such as Signal Level, Signal Quality, Frequency etc.
Version Info: Display system information such as Model Name and Version.
Settings: Refer to Settings section for detailed information.
Record
Record List: The recordings will be displayed if any available. Highlight a recording of your choice and press the Yellow button to delete it or press the Blue button to view detailed information. You can use Red and Green buttons to scroll the page up and down.
Device Info: Connected USB storage devices will be displayed. Highlight the device of your choice and press OK to see available options.
Set TimeShift: Tag the selected USB storage device or a partition on it for time shift recording.
Set PVR: Tag the selected USB storage device or a partition on it for PVR.
Format: Format the selected USB storage device. Refer to USB Recording section for more information
Speed Test: Start a speed test for the selected USB storage device. The test result will be displayed when completed.
Schedule List: Add reminders or record timers using the Schedule List menu.
Time Shift Mode: Enable or disable timeshift recording feature. Refer to USB Recording section for more information.
Settings
You can access the Settings menu from the Home Screen or from the TV options menu in Live TV mode.
Network & Internet
You can configure your TV’s network settings using the options of this menu. You can also highlight the Connected/Not Connected icon on the Home screen and press OK to access this menu.
Wi-Fi: Turn the wireless LAN (WLAN) function on and o .
Available networks
When the WLAN function is turned on, available wireless networks will be listed. Highlight See all and press OK to see all networks. Select one and press OK to connect. You may be asked to enter a password to connect to the selected network, in case the network

English – 13 –

is password protected. Additionally you can add new networks by using the related options.
Other options
Add new network: Add networks with hidden SSID’s.
Scanning always available: You can let the location service and other apps scan for networks, even when WLAN function is turned o . Press OK to turn it on and o .
Wow: Turn this function on and o . This function allows you to turn on or awaken your TV via wireless network.
Wol: Turn this function on and o . This function allows you to turn on or awaken your TV via network.
Ethernet
Connected/Not connected: Displays the status of the internet connection via Ethernet, IP and MAC addresses.
Proxy settings: Set a HTTP proxy for browser manually. This proxy may not be used by other apps.
IP settings: Configure your TV’s IP settings.
Channel
Channels
Options of this menu may change or become inactive depending on the Channel Installation Mode selection.

Favourite Network Select: Select your favourite network. This menu option will be active, if more than one network is available.
Channel Skip: Set channels to be skipped when switching the channels via Programme +/- buttons on the remote. Highlight the desired channel/s on the list and press OK to select/unselect.
Channel Swap: Replace the positions of the two selected channels in the channel list. Highlight the desired channels on the list and press OK to select. When the second channel is selected, the position of this channel will be replaced with the position of the first selected channel. You should set the LCN option to O or Default in order to enable this feature.
Channel Move: Move a channel to the position of another channel. Highlight the channel you want to move and press OK to select. Then do the same for a second channel. When the second channel is selected, the first selected channel will be moved to the position of that channel. You should set the LCN option to O or Default in order to enable this feature.
Channel Edit: Edit channels in the channel list. Edit the name and channel number of the selected channel and display Network Name, Frequency, Colour System and Sound System information related to that channel if available. Depending on the channel other options may also be editable. You can press the Blue button to delete the highlighted channel.

Channel Installation Mode – Antenna
Automatic Channel Search: Start a scan for analogue and digital channels. You can press the Back button to cancel the scan. The channels that have already been found will be stored in the channel list.
Update Scan: Search for updates. Previously added channels will not be deleted, but any newly found channels will be stored in the channel list.

Analogue Channel Fine-tune: Fine-tune an analogue channel. A list of available analogue channels will be
displayed. Select the desired one from the list and
press OK button. Then change the frequency of the channel by pressing Left/Right directional buttons.
Press OK to store the new frequency for that channel. Press Back to cancel. This item may not be visible, depending on whether or not the last watched channel
was analogue.

Analogue Manual Scan: Start a manual scan for analogue channels. Enter the Start Frequency and then select Scan Up or Scan Down. When a channel is found the scan will be completed and the found
channel will be stored in the channel list.

Clear Channel List: Delete all channels stored in the channel list of the selected channel installation mode.
A dialogue will be displayed for confirmation. Highlight
OK and press OK button to proceed. Highlight Cancel and press OK to cancel.

Single RF Scan: Select the RF Channel by using the Right/Left directional buttons. Signal Level and Signal Quality of the selected channel will be shown. Press OK to start scan on the selected RF channel. The found channels will be stored in the channel list.
Manual Service Update: Start a service update manually.
LCN: Set your preference for LCN. LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel number sequence (if available).
Channel Scan Type: Set your scan type preference.

Channel Installation Mode – Cable
Automatic Channel Search: Start a scan for analogue and digital cable channels. If available, operator options will be listed. Select the desired one and press OK. Scan Mode, Channel Scan Type, Frequency and Network ID options may be available. The options may vary depending on the operator and the Scan Mode selections. Set the Scan Mode as Full if you don’t know how to set up other options. Highlight Scan and press OK to start the scan. You can press the Back button to cancel the scan. The channels that have already been found will be stored in the channel list.

Channel Store Type: Set your store type preference.

English – 14 –

Single RF Scan: Enter the Frequency value. Signal Level and Signal Quality of the selected Frequency will be shown. Highlight the Scan option and press OK to start scan. The found channels will be stored in the channel list.
LCN: Set your preference for LCN. LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel number sequence (if available).
Channel Scan Type: Set your scan type preference.
Channel Store Type: Set your store type preference.
Favourite Network Select: Select your favourite network. This menu option will be active, if more than one network is available. This option may not be available depending on the selected country during the initial setup process.
Channel Skip: Set channels to be skipped when switching the channels via Programme +/- buttons on the remote. Highlight the desired channel/s on the list and press OK to select/unselect.
Channel Swap: Replace the positions of the two selected channels in the channel list. Highlight the desired channels on the list and press OK to select. When the second channel is selected, the position of this channel will be replaced with the position of the first selected channel. You should set the LCN option to O or Default in order to enable this feature.
Channel Move: Move a channel to the position of another channel. Highlight the channel you want to move and press OK to select. Then do the same for a second channel. When the second channel is selected, the first selected channel will be moved to the position of that channel. You should set the LCN option to O or Default in order to enable this feature.
Channel Edit: Edit channels in the channel list. Edit the name and channel number of the selected channel and display Network Name, Frequency, Colour System, Sound System, Modulation and Symbol Rate information related to that channel. Depending on the channel other options may also be editable. You can press the Blue button to delete the highlighted channel.
Analogue Channel Fine-tune: Fine-tune an analogue channel. A list of available analogue channels will be displayed. Select the desired one from the list and press OK button. Then change the frequency of the channel by pressing Left/Right directional buttons. Press OK to store the new frequency for that channel. Press Back to cancel. This item may not be visible, depending on whether or not the last watched channel was analogue.
Clear Channel List: Delete all channels stored in the channel list of the selected channel installation mode. A dialogue will be displayed for confirmation. Highlight OK and press OK button to proceed. Highlight Cancel and press OK to cancel.

Channel Installation Mode – Preferred/General Satellite/Satellite
Satellite Re-scan: Start a satellite scan beginning with the operator selection screen for the Preferred Satellite channel installation mode or with the satellite selection screen for the General Satellite or Satellite channel installation mode. When this scanning option is preferred, some scanning configurations will not be available and thus the preferences you made during the initial setup process may not be changed.
Satellite Add: Add satellite and perform a satellite scan.
Satellite Update: Search for any updates by repeating the previous scan with the same settings. You will also be able to configure these settings before the scan. If Channel Installation Mode is set to Preferred Satellite this option may be named di erently depending on the available services. Highlight the satellite and press OK button to configure detailed satellite parameters. Press the Right directional button to proceed.
Satellite Manual Tuning: Start a manual satellite scan.
Favourite Network Select: Select your favourite network. This menu option will be active, if more than one network is available. This option may not be available depending on the selected country during the initial setup process.
Channel Skip: Set channels to be skipped when switching the channels via Programme +/- buttons on the remote. Highlight the desired channel/s on the list and press OK to select/unselect.
Channel Swap: Replace the positions of the two selected channels in the channel list. Highlight the desired channels on the list and press OK to select. When the second channel is selected, the position of this channel will be replaced with the position of the first selected channel.
Channel Move: Move a channel to the position of another channel. Highlight the channel you want to move and press OK to select. Then do the same for a second channel. When the second channel is selected, the first selected channel will be moved to the position of that channel.
Channel Edit: Edit channels in the channel list. Edit the name and channel number of the selected channel and display Network Name, Frequency, Colour System and Sound System information related to that channel if available. Depending on the channel other options may also be editable. You can press the Blue button to delete the highlighted channel.
Clear Channel List: Delete all channels stored in the channel list of the selected channel installation mode. A dialogue will be displayed for confirmation. Highlight OK and press OK button to proceed. Highlight Cancel and press OK to cancel.

English – 15 –

Note: Some options may not be available and appear as grayed out depending on the operator selection and operator related settings.

Open Source Licenses Display Open Source Software license information.

Channel Installation Mode

Version

Set this option as Antenna, Cable, Preferred Satellite, General Satellite or Satellite.
Auto Channel Update
Turn the auto channel update function on or o .
Channel Update Message
Turn the channel update message function on or o . This item may not be visible, depending on the Channel Installation Mode selection.
Parental Controls

7R HQWHU WKLV PHQX 3,1 VKRXOG EH HQWHUHG ¿UVW ‘HIDXOW PIN is set to 1234,IRXKDYHGH¿QHGDQHZ3,1DIWHUWKH LQLWLDOVHWXSSURFHVVXVHWKH3,1WKDWRXKDYHGH¿QHG6RPH options may not be available or vary depending on the country selection during the initial setup.
Channels Blocked: Select channel/s to be blocked from the channel list. Highlight a channel and press OK to select/unselect. To watch a blocked channel PIN should be entered first.
Programme Restrictions: Block programmes according to the age rating information that is being broadcasted with them. You can turn on or o restrictions, set rating systems, restriction levels and age limits using the options of this menu.
Inputs Blocked: Prevent access to the selected input source content. Highlight the desired input option and press OK to select/unselect. To switch to a blocked input source PIN should be entered first.
Change PIN: Change the default PIN. Highlight this option and press OK. You will need to enter the old PIN first. Then new PIN entry screen will be displayed. Enter the new PIN twice for confirmation.
Audio Channel
Set the audio channel preference, if available. This item may not be visible, depending on whether or not the last watched channel was analogue.

Displays system version number.
Accounts & Sign In
Google: This option will be available if you have signed in to your Google account. You can configure your data syncing preferences or remove your registered account on the TV. Highlight a service listed in the Choose synced apps section and press OK to enable/disable data sync. Highlight Sync now and press OK to sync all enabled services at once.
Add account: Add a new one to available accounts by signing in to it.
Apps
Using the options of this menu, you can manage the apps on your TV.
Recently opened apps
You can display recently opened apps. Highlight See all apps and press OK to see all the apps installed on your TV. The amount of storage space that they needed will also be displayed. You can see the version of the app, open or force to stop the running of the app, uninstall a downloaded app, see the permissions and turn them on/o , turn on/o the notifications, clear the data and cache etc. Highlight an app and press OK to see available options.
Permissions
Manage the permissions and some other features of the apps.
App permissions: The apps will be sorted by permission type categories. You can enable disable permissions for the apps from within these categories.
Special app access: Configure some app features and special permissions.
Security & restrictions: Using the options of this menu;

Audio Language
Set one of the listed language options as first audio language preference. This item may not be visible, depending on whether or not the last watched channel was digital.
Second Audio Language
Set one of the listed language options as second audio language preference. If in the Audio Language setting selected language option is not supported, this language preference will be considered. This item may not be visible, depending on whether or not the last watched channel was digital.

· You can allow or restrict installation of apps from sources other than the Google Play Store.
· Set the TV to disallow or warn before installation of apps that may cause harm.
Device Preferences
About: Check for system updates, change the device name, restart the TV and display system information such as network addresses, serial numbers, versions etc. You can also display legal information, manage advertisings, display your advertising ID, reset it and turn on/o the personalised advertisings based on your interests.

English – 16 –

Netflix ESN: Display your ESN number. ESN number is an unique ID number for Net ix, created especially to identify your TV.
Date & time: Set the date and time options of your TV. You can set your TV to automatically update the time and date data over the network or over the broadcasts. Set corresponding to your environment and preference. Disable by setting as O if you want to manually change the date or time. Then set date, time, time zone and hour format options.

Sport, Movie and Game. You can use User mode to create customised settings.
Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and ‘ROE9LVLRQ%ULJKW picture mode options will be available instead of other picture modes.
Backlight, Brightness, Contrast, Colour, Hue, Sharpness settings will be adjusted according to the selected picture mode. If one of these settings is changed manually, Picture Mode option will be changed to User, if not already set as User.

Timer
Power On Time Type: Set your TV to turn on by itself. Set this option as On or Once to enable a power on timer to be set, set as O to disable. If set as Once the TV will turn on only once at the defined time in Auto Power On Time option below.
Auto Power On Time: Available if the Power On Time Type is enabled. Set the desired time for your TV to come on from standby using the directional buttons and press OK to save the new set time.

Dolby Vision Noti cation: Set your notification appearance preference for Dolby Vision content. When turned on, Dolby Vision logo will be displayed on the screen when Dolby Vision content is detected.
Auto Backlight: Set your auto backlight preference. O , Low, Middle and Eco options will be available. Set as O to disable.
Backlight: Adjust the backlight level of the screen manually. This item will not be available if the Auto Backlight is not set as O .

Power O Time Type: Set your TV to turn o by itself. Set this option as On or Once to enable a power o timer to be set, set as O to disable. If set as Once the TV will turn o only once at the defined time in Auto Power O Time option below.
Auto Power O Time: Available if the Power O Time Type is enabled. Set the desired time for your TV to go to standby using the directional buttons and press OK to save the new set time.

Brightness: Adjust the brightness value of the screen.
Contrast: Adjust the contrast value of the screen.
Colour: Adjust the colour saturation value of the screen.
Hue: Adjust the hue value of the screen.
Sharpness: Adjust the sharpness value for the objects displayed on the screen.

Language: Set your language preference.
Keyboard: Select your keyboard type and manage keyboard settings.
Inputs: Show or hide an input terminal, change the label for an input terminal, and configure the options for HDMI CEC(Consumer Electronic Control) function and display the CEC device list.
Power
Sleep Timer: Define an idle time after which you want your TV to enter sleep mode automatically.
Picture o : Select th s opt on and press OK to turn the screen o . Press a button on the remote or on the TV to turn the screen on again. Note that you can not turn the screen on via the Volume +/-, Mute and Standby buttons. These buttons will function normally.
No Signal Auto Power O : Set the behaviour of the TV, when no signal is detected from the currently set input source. Define a time after which you want your TV to turn itself o or set as O to disable.
Picture
Picture Mode: Set the picture mode to suit your preference or requirements. Picture mode can be set to one of these options: User, Standard, Vivid,

Gamma: Set your gamma preference. Dark, Middle and Bright options will be available.
Colour Temperature: Set your colour temperature preference. User, Cool, Standard and Warm options will be available. You can adjust red, green and blue gain values manually. If one of these values is changed manually, Colour Temperature option will be changed to User, if not already set as User.
Display Mode: Set the aspect ratio of the screen. Select one of the predefined options according to your preference.
HDR: Turn the HDR function on or o . This item will be available if HDR content is detected.
Advanced Video
DNR: Dynamic Noise Reduction (DNR) is the process of removing noise from digital or analogue signal. Set your DNR preference as Low, Medium, Strong, Auto or turn it o by setting as O .
MPEG NR: MPEG Noise Reduction cleans up block noise around outlines and noise on the background. Set your MPEG NR preference as Low, Medium, Strong or turn it o by setting as O .
Adaptive Luma Control: Adaptive Luma control adjusts contrast settings globally according to content histogram in order to provide deeper black

English – 17 –

and brighter white perception. Set your Adaptive Luma Control preference as Low, Medium, Strong or turn it o by setting as O .
Local Contrast Control: Local contrast control divides each frame to defined small regions and provides ability to apply independent contrast setting for each region. This algorithm improves fine details and provides better contrast perception. It makes higher depth impression by enhancing dark and bright areas without any detail loss. Set your Local Contrast Control preference as Low, Medium, High or turn it o by setting as O .
DI Film Mode: It is the function for 3:2 or 2:2 cadence detection for 24 fps film contents and improves the side e ects (like interlacing e ect or judder) which are caused by these pull down methods. Set your DI Film Mode preference as Auto or turn it o by setting as O . This item will not be available if Game Mode is turned on.
Blue Stretch: Human eye perceives cooler whites as brighter white, Blue Stretch feature changes White balance of mid-high grey levels to cooler colour temperature. Turn the Blue Stretch function on or o .
Game Mode: Game mode is the mode which cuts down some of the picture processing algorithms to keep up with video games that have fast frame rates. Turn the Game Mode function on or o .
HDMI RGB Range: This setting should be adjusted according to input RGB signal range on HDMI source. It can be limited range (16-235) or full range (0-255). Set your HDMI RGB range preference. Auto, Full and Limit options will be available. This item will not be available, if the input source is not set as HDMI.
Colour Tuner: Colour saturation, hue, brightness can be adjustable for red, green, blue, cyan, magenta, yellow and esh tone (skin tone) for having more vivid or more natural image. Set the Hue, Colour, Brightness, Offset and Gain values manually. Highlight Enable and press OK to turn this function on.
11 Point White Balance Correction: White balance feature calibrates TV’s colour temperature in detailed grey levels. By visually or measurement, grey scale uniformity can be improved. Adjust the strength of the Red, Green, Blue colours and Gain value manually. Highlight Enable and press OK to turn this function on.
Reset to Default: Reset the video settings to factory default settings.
Note: Depending on the currently set input source some menu
options may not be available.

Sound
System Sounds: System sound is the sound played when navigating or selecting an item on the TV screen. Highlight this option and press OK to turn this function on or o .
Sound Style: For easy sound adjustment, you can select a preset setting. User, Standard, Vivid, Sport, Movie, Music or News options will be available. Sound settings will be adjusted according to the selected sound style. Some other sound options may become unavailable depending on the selection.
Balance: Adjust the left and right volume balance for speakers and headphones.
Equaliser Detail: Adjust the equaliser values according to your preferences.
Speakers: To hear the TV audio from the connected compatible audio device set as External Audio System. Set as TV Speakers to use the speakers of your TV for sound output.
Digital Output: Set the digital sound output preference. Auto, Bypass, PCM, Dolby Digital Plus and Dolby Digital options will be available. Highlight the option you prefer and press OK to set.
SPDIF Delay: Adjust the SPDIF delay value.
Auto Volume Control: With Auto Volume Control, you can set the TV to automatically level out sudden volume di erences. Typically at the beginning of adverts or when you are switching channels. Turn this option on/o by pressing OK.
Downmix Mode: Set your preference to convert multi-channel audio signals to two-channel audio signals. Press OK to see the options and set. Stereo and Surround options will be available. Highlight the option you prefer and press OK to set.
Dolby Audio Processing: With Dolby Audio Processing, you can improve the sound quality of your TV. Press OK to see the options and set. Some other sound options may become unavailable and appear as grayed out depending on the settings made here.
Dolby Audio Processing: Highlight this option and press OK to turn this function on/o .
Sound Mode: If the Dolby Audio Processing option is turned on Sound Mode option will be available to set. Highlight the Sound Mode option and press OK to see the preset sound modes. Smart, Movie, Music and News options will be available. Highlight the option you prefer and press OK to set.
Reset to Default: Resets the sound settings to factory defaults.
Storage: View the total storage space status of the TV and connected devices if available. To see detailed in-

English – 18 –

formation on the usage details highlight and press OK. There will also be options for ejecting and formatting the connected storage devices.
Home screen: Customise your home screen. Select channels which will be displayed on the home screen. Organize apps and games, change their order or get more of them.
Store mode: Highlight Store mode and press OK. Read the description, highlight Continue and press OK if you want to proceed. Then highlight On to activate or O to deactivate and press OK. In store mode your TV’s settings will be configured for store environment and the supported features will be displayed on the screen. Once activated, Store messaging setting will become available. Set according to your preferences. It is recommended not to activate store mode for home use.
Google Assistant: Select your active account, view permissions, select which apps to include in search results, activate safe search filter, active o ensive word blocking and view open source licenses.
Screen saver: Set screensaver and sleep mode options for your TV. You can choose a screensaver, set wait time for the screensaver, set when the TV goes into sleep mode or start the screensaver mode.
Location: You can allow the use of the wireless connection to estimate the location, see the recent location requests and allow or restrict the listed apps to use your location information.
Usage & Diagnostics: Automatically send usage data and diagnostic information to Google. Set according to your preference.
Manufacturer Usage & Diagnostics: If you accept, your TV will send diagnostic information (such as MAC address, country, language, software and firmware versions, bootloader versions and the source of the TV) and anonymous usage data from your device to a server located in Ireland. We are not able to identify you and are only collecting and storing this diagnostic information and anonymous usage data to ensure your device operates properly.
Accessibility: Configure Visually Impaired, AC4 Dialogue Enhancement, Captions, Text to speech, Accessibility shortcut settings and/or turn Audio Description, Hearing Impaired, High contrast text on/o . Some of the caption settings may not be applied.
Visually Impaired: Digital TV channels can broadcast special audio commentary describing on-screen action, body language, expressions and movements for people with visual disabilities.
Speaker: Turn this option on if you want to hear the audio commentary through the TV speakers.

Headphone: Turn this option on if you want to route the sound of the audio commentary to the TV’s headphone output.
Volume: Adjust the volume level of the audio commentary.
Pan and Fade: Turn this option on if you want to hear the audio commentary more clearly, when it is available through broadcast.
Audio for the Visually Impaired: Set the audio type for visually impaired. Options will be available depending on the selected broadcast.
Fader Control: Adjust the volume balance between the main TV audio (Main) and audio commentary (AD).
Reset: Reset all TV settings to the factory default. Highlight Reset and press OK. A confirmation message will be displayed, select Erase everything to proceed with resetting. The TV will switch o /on first and the initial setup will start. Select Cancel to exit.
Note: You may be asked to enter a PIN to proceed with the UHVHWRSHUDWLRQ(QWHUWKH3,1RXKDYHGH¿QHGGXULQJWKH¿UVW WLPHLQVWDOODWLRQ,IRXGLGQ
WVHWD3,1GXULQJWKH¿UVWWLPHLQstallation, you can use the default PIN. The default PIN is 1234.
Remote & Accessories
You can use wireless accessories, such as your remote control (depends on the model of the remote control), headphones, keyboards or game controllers with your Android TV. Add devices to use them with your TV. Select this option and press OK to start searching available devices in order to pair them with your TV. If available highlight Add accessory option and press OK to start the search. Set your device to pairing mode. Available devices will be recognized and listed or pairing request will be displayed. Select your device from the list and press OK or highlight OK and press OK to start pairing.
Connected devices will also be listed here. To unpair a device, highlight it and press OK. Then highlight Unpair option and press OK. Then select OK and press OK again to unpair the device from the TV. You can also change the name of an connected device. Highlight the device and press OK, then highlight Change name and press OK again. Press OK again use the virtual keyboard to change the name of the device.
Channel List
The TV sorts all stored channels in the Channel List. Press the OK button to open the Channel List in Live TV mode. You can press the Red button to scroll up the list page by page, or press the Green button to scroll down.
If desired, you can filter or sort the channels or find a channel in the channel list. Press the Yellow button

English – 19 –

to display the Select More options. Available options are Select Type, Sort and Find. Sort option may not be available depending on the selected country during the initial setup process.
To filter the channels highlight Select Type and press the OK button. You can select among Categories, Digital, Radio, Free, Encrypted, Analogue, Favourite and Network options to filter the channel list or select Broadcast option to see all installed channels in the channel list. Available options may di er depending on the operator selection.
To sort the channels highlight Sort and press the OK button. Select one of the available options and press OK again. The channels will be sorted according to your selection.
To find a channel highlight Find and press the OK button. Virtual keyboard will be displayed. Enter all or a portion of the name or number of the channel you want to find, highlight the check mark symbol on the keyboard and press OK. Matching results will be listed.
Note: If any option except Broadcast is selected in the Select Type menu, you can only scroll through the channels that are currently listed in the channel list using the 3URJUDPPH +/- buttons on the remote.
Editing the Channels and the Channel List
You can edit the channels and the channel list using the Channel Skip, Channel Swap, Channel Move and Channel Edit options under the Settings>Channel>Channels menu. You can access the Settings menu from the Home Screen or from the TV options menu in Live TV mode.
Note: The options Channel Swap, Channel Move and Channel Edit may not be available and appear as grayed out depending on the operator selection and operator related settings. <RX FDQ WXUQ R WKH LCN setting in the 6HWWLQJV!&KDQQHO menu, as it prevents channel editing. This option might be set to On by default depending on the selected country during the initial setup process.
Managing Favourite Channel Lists
You can create four di erent lists of your favourite channels. These lists include only the channels that are specified by you. Press the OK button to display the channel list. Then press Blue button to access favourite lists. If one of the lists is being displayed on the screen you can press the Left or Right directional button to switch from one list to another. In order to change the position of a channel highlight that channel and press the Yellow button. Then use the Up and Down directional buttons to move the channel to the desired position and press OK. Highlight a channel in the list and press the OK button to watch.
To add the currently watched channel to one of your favourite lists select the desired favourite list as described above and press the Menu button on the remote. Then enter the Channels menu, highlight Add to My Favourites option and press OK. The

channel will be added to the selected favourite list. Only the currently watched channel can be added to a favourite list. To remove a channel from a favourite list open the favourite list, highlight that channel and press the Blue button.
If you want to set one of your Favourite channel lists as the main channel list, you need to select the desired favourite list as described above. Then set the Select Type option to Favourite. Open the channel list and press the Yellow button to see the options. Depending on the operator selection this feature may be blocked and not work properly.
Programme Guide
By means of Electronic Programme Guide (EPG) function of your TV you can browse the event schedule of the currently installed channels on your channel list. It depends on the related broadcast whether this feature is supported or not.
In order to access the Electronic Programme Guide on the Home Screen press the Guide button on the remote. Electronic Programme Guide is also available in Live TV mode. You can switch to Live TV mode by either launching the Live TV application on the Home Screen or selecting Channels input source from the Inputs menu on the Home Screen. To access the programme guide while in Live TV mode, press the Guide button on your remote.
Use the directional buttons to navigate through the programme guide. You can use the Up/Down directional buttons or Programme +/- buttons to switch to previous/next channel on the list and Right/ Left directional buttons to select a desired event of the currently highlighted channel. If available, the full name, start-end time and date, genre of the highlighted event and a brief information about it will be displayed on the screen.
Press Blue button to filter the events. Due to the large variety of filter options you can find events of the desired type quicker. Press Yellow button to see detailed information on the highlighted event. You can also use Red and Green buttons to see events of previous day and next day. The functions will be assigned to the coloured buttons on the remote when they are available. Follow the on-screen information for accurate button functions.
Press Record button to add a timer for the highlighted event in the guide. You can define the type of the timer by setting the Schedule type option as Reminder or Record. When other parameters are set highlight Add and press OK. The timer will be added to the schedule list. You can access the schedule list from the Record menu in Live TV mode.
The guide can not be displayed if TV input source is blocked from the Settings>Channel>Parental

English – 20 –

Controls>Inputs Blocked menu in Live TV mode or on Home Screen.
Connecting to the Internet
You can access the Internet via your TV, by connecting it to a broadband system. It is necessary to configure the network settings in order to enjoy a variety of streaming content and internet applications. These settings can be configured from Settings>Network & Internet menu. You can also highlight the Connected/ Not Connected icon on the Home screen and press OK to access this menu. For further information refer to Network & Internet section under the title of Settings.
Wired Connection Connect your TV to your modem/router via an Ethernet cable. There is a LAN port on the rear side of your TV.
The status of the connection under the Ethernet section in the Network & Internet menu will change from Not connected to Connected.

1. Network wall socket 2. LAN input on the rear side of the TV Wireless Connection A wireless LAN modem/router is required to connect the TV to the Internet via wireless LAN. Highlight Wi-Fi option in the Network & Internet menu and press OK to enable wireless connection. Available networks will be listed. Select one and press OK to connect. For more information refer to Network & Internet section under the title of Settings.

1. Broadband ISP connection 2. LAN (Ethernet) cable 3. LAN input on the rear side of the TV You might be able to connect your TV to a network wall socket depending on your network’s configuration. In that case, you can connect your TV directly to the network using an Ethernet cable.

1. Broadband ISP connection
A network with hidden SSID can not be detected by other devices. If you want to connect to a network with hidden SSID, highlight the Add new network option under the Settings>Network & Internet menu on the Home Screen and press OK. Add the network by entering its name manually using the related option.
Some networks may have an authorisation system that requires a second login as such in a work environment. In this case, after connecting to the wireless network you want to connect to, highlight Noti cations situated on the upper right of the Home Screen and press OK. Then highlight the Sign in to Wi-Fi network notification and press OK. Enter your credentials to log in.
A Wireless-N router (IEEE 802.11a/b/g/n/ac) with simultaneous 2.4 and 5 GHz bands is designed to increase bandwidth. These are optimized for smoother and faster HD video streaming, file transfers and wireless gaming.
Use a LAN connection for quicker data transfer between other devices like computers.
The transmission speed di ers depending on the distance and number of obstructions between the transmission products, the configuration of these products, the radio wave conditions, the line tra c and the products that you use. The transmission may also be cut o or may get disconnected depending

English – 21 –

on the radio wave conditions, DECT phones or any other WLAN 11b appliances. The standard values of the transmission speed are the theoretical maximum values for the wireless standards. They are not the actual speeds of data transmission.
The location where the transmission is most e ective di ers depending on the usage environment.
The Wireless feature of the TV supports 802.11 a,b,g,n & ac type modems. It is highly recommended that you should use the IEEE 802.11n communication protocol in order to avoid any possible problems while watching videos.
You must change your modem’s SSID when there are any other modems around with the same SSID. You can encounter connection problems otherwise. Use a wired connection if you experience problems with a wireless connection.
A stable connection speed is required to play back streaming content. Use an Ethernet connection if the wireless LAN speed is unstable.
Multi Media Player
On the Home Screen scroll to Apps row, select Multi Media Player (MMP) and press the OK button to launch.
Select the media type on the main media player screen. On the next screen, you can press the Menu button to access a list of menu options while the focus is on a folder or a media file. Using the options of this menu you can change the media type, sort the files, change the thumbnail size and turn your TV into a digital photo frame. You will also be able to copy, paste and delete the media files using the related options of this menu, if a FAT32 formatted USB storage device is connected to the TV. Additionally you can switch the viewing style by selecting either Normal Parser or Recursive Parser. In Normal Parser mode the files will be displayed with folders if any available. So only the selected type of media files in the root folder or in the selected folder will be displayed. If there isn’t any media files of the selected type, the folder will be assumed as empty. In Recursive Parser mode the source will be searched for all available media files of the selected type and the found files will be listed. Press the Back/Return button to close this menu.
In order to activate photo frame feature select Photo as the media type. Then press the Menu button, highlight Photo Frame and press OK. If you select One Photo mode option and press OK the image that you set as photo frame image earlier will be displayed when photo frame feature is activated. If you select the USB storage device option the first file (in Recursive Parser mode) will be displayed. To set the photo frame image press the Menu button while the photo file of

your choice is displayed, highlight Photo Frame Image and press OK.
While browsing for the video files a preview of the highlighted video will be displayed in a small window on the left side of the screen if the view style is set to List View. Press the Blue button to switch between the List View and Grid View. You can also use Programme +/- buttons to jump directly to the first and last folder or file if the view style is set to Grid View.
Video Files
Press OK to play back the highlighted video file.
Info: Display the info bar. Press twice to display the extended information and the next file.
Play/pause: Pause and resume the playback.
Rewind: Start reverse playback. Press consecutively to set the rewind speed.
Fast Forward: Start fast forward playback. Press consecutively to set the forward playback speed.
Stop: Stop the playback and return to the media player screen.
Programme +: Switch to next file.
Programme -: Switch to previous file.
Back/Return: Return to the media player screen.
Music Files
Press OK to play back the highlighted music/audio file.
Info: Display the extended information and the next file.
Play/pause: Pause and resume the playback.
Rewind: Press and hold to rewind.
Fast Forward: Press and hold to fast forward.
Stop: Stop the playback.
Programme +: Switch to next file.
Programme -: Switch to previous file.
Back/Return: Return to the media player screen.
If you press Back/Return button without stopping the playback first the playback will continue while you are browsing in the multimedia player. You can use the media player buttons to control the playback. The playback will stop if you exit the media player or switch the media type to Video.
Photo Files
Press OK to display the highlighted photo file. When you press the Play button slide show will start and all photo files in the current folder or in the storage device, depends on the viewing style, will be displayed in order. If the Repeat option is set to None only the files between the highlighted one and the last listed one will be displayed. The slide show will stop after the last listed file is displayed.
Info: Display the info bar. Press twice to display the extended information.

English – 22 –

Play/pause: Pause and resume the slide show.
Green button (Rotate/Duration): Rotate the image / Set the interval between the slides.
Yellow button (Zoom/E ect): Zoom in on the image / Apply various e ects to the slide show.
Programme +: Switch to next file.
Programme -: Switch to previous file.
Back/Return: Return to the media player screen.
Text Files
When you press the OK button slide show will start and all text files in the current folder or in the storage device, depends on the viewing style, will be displayed in order. If the Repeat option is set to None only the files between the highlighted one and the last listed one will be displayed. The slide show will stop after the last listed file is displayed.
Info: Display the info bar. Press twice to display the extended information.
Play/pause: Pause and resume the slide show.
Programme +: Switch to next file.
Programme -: Switch to previous file.
Directional buttons (Down or Right / Up or Left): Switch to next page. / Switch to previous page.
Back/Return: Stop the slide show and return to the media player screen.

Press the Menu button to see available options while playing back or displaying media files. The content of this menu di ers depending on the media file type.
Pause/Play: Pause and resume the playback or the slide show.
Repeat: Set the repeat option. Highlight an option and press OK to change the setting. If Repeat One option is selected the current media file will be repeatedly played back or displayed. If the Repeat All option is selected all media files of the same type in the current folder or in the storage device, depends on the viewing style, will be repeatedly played back or displayed.
Shu e On/O : Turn the shu e option on or o . Press OK to change the setting.
Duration: Set the interval between the slides. Highlight an option and press OK to change the setting. You can also press the Green button to set. This option will not be available if the slide show is paused.
Rotate: Rotate the image. The image will be rotated 90 degrees clockwise each time you press OK. You can also press the Green button to rotate. This option will not be available if the slide show is not paused.
Effect: Apply various effects to the slide show. Highlight an option and press OK to change the setting.

You can also press the Yellow button to set. This option will not be available if the slide show is paused.
Zoom: Zoom in on the image that is currently being displayed. Highlight an option and press OK to change the setting. You can also press the Yellow button to zoom in. This option will not be available if the slide show is not paused.
Font: Set the font options. Size, style and colour can be set according to your preferences.
Show Info: Display the extended information.
Photo Frame Image: Set the currently displayed image as photo frame image. This image will be displayed if the One Photo mode is selected instead of the connected storage device while activating the photo frame feature. Otherwise all files will be played back as a slide show when photo frame feature is activated.
Hide/Show Spectrum: Hide or show the spectrum if available.
Lyric Options: Display lyric options if available.
Picture O : Open the power menu of your TV. You can use the Picture o option here to turn the screen o . Press a button on the remote or on the TV to turn the screen on again.
Picture Settings: Display the picture settings menu.
Sound Settings: Display the sound settings menu.
Audio Settings: Set the soundtrack option if more then one available.
Last Memory: Set to Time if you want to resume the playback from the position where it was stopped next time you open the same video file. If set to O the playback will start from the beginning. Highlight an option and press OK to change the setting.
Seek: Jump to a specific time of the video file. Use the numeric and directional buttons to enter the time and press OK.
Subtitle: Set your subtitle preference if any available. Set to O to turn the subtitles o .
Subtitle Encoding: Display subtitle encoding options if available.
From USB Connection
IMPORTANT!%DFNXSWKH¿OHVRQRXU86%VWRUDJHGHYLFHV before connecting them to the TV. Manufacturer will not be UHVSRQVLEOH IRU DQ ¿OH GDPDJH RU GDWD ORVV &HUWDLQ WSHV of USB devices (e.g. MP3 Players) or USB hard disk drives/ memory sticks may not be compatible with this TV. The TV supports FAT32 and NTFS disk formatting. FAT32 formatted devices with a storage capacity larger than 192TB are not supported. NTFS formatted devices with a storage capacity larger than 16TB are not supported.
You can view your photos, text documents or play your music and video files installed on a connected USB

English – 23 –

storage device on the TV. Plug in the USB storage device to one of the USB inputs on the TV.
On the main media player screen select the desired media type. On the next screen, highlight a file name from the list of available media files and press the OK button. Follow the on-screen instructions for more information on other available button functions.
Note: Wait a little while before each plugging and unplugging DVWKHSODHUPDVWLOOEHUHDGLQJ¿OHV)DLOXUHWRGRVRPD cause physical damage to the USB player and the USB device LWVHOI’RQRWSXOORXWRXUGULYHZKLOHSODLQJD¿OH
From a Mobile Device via DMR
Make sure that your mobile device is connected to the same network as your TV. On the TV, scroll to Apps row on the Home Screen, select Multi Media Player (MMP) and press the OK button to launch. Select the media type on the main media player screen. On the next screen, press the Blue button to switch the List View layout. Then press the Back button. DMR (Digital Media Renderer) option will appear among the media type options. Highlight the DMR option and press the OK button. The TV is ready to receive the media file sent from your mobile device. On the mobile device, open the file you want to share and tap on the sharing icon or on the related option from the options menu of your mobile device. Available devices will be listed. Select your TV from the list. You can get the device name of your TV from the Settings>Device Preferences>About menu on the Home screen. If desired, the name of the TV can also be changed by either selecting one of the predefined names or entering a custom name using the options of the Device name menu. If the connection is successfully established the selected media file will be played/ displayed on your TV.
USB Recording
To record a programme, you should first connect a USB storage device to your TV while the TV is switched o . You should then switch on the TV to enable the recording feature. To record long duration programmes such as movies, it is recommended to use USB Hard disk drives (HDD’s). Recorded programmes are saved onto the connected USB storage device. If desired, you can store/copy recordings onto a computer; however, these files will not be available to be played on a computer. You can play the recordings only via your TV. Lip Sync delay may occur during the timeshifting. Radio record is supported. If the writing speed of the connected USB storage device is not su cient, the recording may fail and the timeshifting feature may not be available. It is recommended to use USB hard disk drives for recording HD programmes.

Do not pull out the USB/HDD during a recording. This may harm the connected USB/HDD. Some stream packets may not be recorded because of signal problems, as a result sometimes videos may freeze during playback. If a recording starts from timer when teletext is on, a dialogue will be displayed. If you highlight Yes and press OK teletext will be turned o and recording will start.
Instant Recording
Press Record button to start recording an event instantly while watching a programme. Press Stop button to stop and save the instant recording.
You can not switch broadcasts during the recording mode.
Watching Recorded Programmes
Select Record List from the Record menu in Live TV mode and press OK. Select a recorded item from the list (if previously recorded). Press the OK button to watch.
Press the Stop or Back/Return button to stop a playback.
The recordings will be named in the following format: Channel NameDate(Year/Month/Day) Duration(Hour/Minute/Second)_Programme Name.
Timeshift Recording
In order to use timeshift recording feature Time Shift Mode option in the Record>Time Shift Mode menu should be enabled first.
In timeshifting mode, the programme is paused and simultaneously recorded to the connected USB storage device. Press Pause/Play button while watching a broadcast to activate timeshifting mode. Press Pause/ Play button again to resume the paused programme from where you stopped. Press the Stop button to stop timeshift recording and return to the live broadcast.
When this feature is used for the first time Disk Setup wizard will be displayed when the Pause/Play button is pressed. You can either choose Auto or Manual setup mode. In Manual mode, if you prefer, you can format your USB storage device and specify the storage space that will be used for timeshift function. When the setup is complete, the Disk Setup Result will be displayed. Press Exit button.
Timeshift function will not be available for radio broadcasts.
Disk Format
When using a new USB storage device, it is recommended that you first format it using the Format option in the Record>Device Info menu in Live TV mode. Highlight the connected device on the Device Info screen and press OK or Right directional button to see the list of available options. Then highlight

English – 24 –

Format and press OK to proceed. A confirmation dialogue will be displayed. Highlight Yes and press OK to start formatting.
IMPORTANT: Formatting your USB storage device will erase ALL the data on it and its file system will be converted to FAT32. In most cases operation errors will be fixed after a format but you will lose ALL your data.
Schedule List
You can add reminders or record timers using the Schedule List menu. You can access the Schedule List from the Record menu in Live TV mode. Highlight Schedule List and press OK. Previously set timers will be listed if any available.
Press Record button to add a timer while the Schedule List menu is displayed on the screen. You can define the type of the timer by setting the Schedule Type option as Reminder or Record. When other parameters are set highlight Add and press OK. The timer will be added to the list.
If any available, you can also edit or delete the timers on this list. Highlight the timer of your choice and press OK. Edit and Delete options will appear at the bottom of the screen. Highlight the desired option and press OK. After you edited a timer you can choose either to replace it or add it as a new timer. If you choose the Replace option, the timer will be saved with the new settings. If you choose the Add option, the timer will be added to the list as a new timer. Highlight Replace or Add according to your preference and press OK to proceed. When you choose to delete a timer a confirmation dialogue will be displayed on the screen. Highlight Yes and press OK to delete the selected timer.
A warning message will be displayed if the time intervals of two timers overlap. You can not set more than one timer for the same time interval.
Press EXIT button to close the Schedule List.
CEC
With CEC function of your TV you can operate a connected device with the TV remote control. This function uses HDMI CEC (Consumer Electronics Control) to communicate with the connected devices. Devices must support HDMI CEC and must be connected with an HDMI connection.
In order to make use of the CEC functionality the related option in the menu should be switched on. To check, switch on or o the CEC function, do the following:
· Enter the Settings>Device Preferences>Inputs menu on the Home Screen or TV options>Settings>Device Preferences>Inputs menu in Live TV mode.

· Scroll down to Consumer Electronic Control (CEC) section. Check if the HDMI control option is switched on.
· Highlight the HDMI control option and press OK to switch on or o .
Make sure that all CEC settings are properly set up on the connected CEC device. The CEC functionality has di erent names on di erent brands. CEC function might not work with all devices. If you connect a device with HDMI CEC support to your TV, the related HDMI input source will be renamed with the connected device’s name.
To operate the connected CEC device, select the related HDMI input source from the Inputs menu on the Home Screen. Or press the Source button if the TV is in Live TV mode and select the related HDMI input source from the list. To terminate this operation and control the TV via the remote again, press the Source button, which will still be functional, on the remote and switch to another source.
The TV remote is automatically able to control the device once the connected HDMI source has been selected. However not all buttons will be forwarded to the device. Only devices that support CEC Remote Control function will respond to the TV remote control.
The TV supports also ARC(Audio Return Channel) feature. This feature is an audio link meant to replace other cables between the TV and the audio system (A/V receiver or speaker system). Connect the audio system to the HDMI2 input on the TV to enable ARC feature.
In order to activate ARC feature the Speakers option should be set as External Audio System. You can access this option from the TV options or TV options>Settings>Device Preferences>Sound menu in Live TV mode or from Settings>Device Preferences>Sound menu on the Home Screen. When ARC is active, TV will mute its other audio outputs automatically. So you will hear audio from connected audio device only. The volume control buttons of the remote will be directed to connected audio device and you will be able to control the volume of the connected device with your TV remote.
Note: ARC is supported only via the HDMI2 input.
Google Cast
With the built-in Google Cast technology you can cast the content from your mobile device straight to your TV. If your mobile device has Google Cast feature, you can mirror your device’s screen to your TV wirelessly. Select Cast screen option on your android device. Available devices will be detected and listed. Select your TV from the list and tap on it to start casting. You can get the network name of your TV from the Settings>Device Preferences>About menu on the

English – 25 –

Home screen. Device name will be one of the shown articles. You can also change the name of your TV. Highlight Device name and press OK. Then highlight Change and press OK again. You can either select one of the predefined names or enter a custom name.
To cast your device’s screen to the TV screen…
1. On your android device, go to Settings’ from the notification panel or home screen 2\. Tap onDevice Connectivity’
3. Tap on the Easy projection’ and enableWireless projection’. Available devices will be listed
4. Select the TV you would like to cast to
or
1. Slide down the notification panel
2. Tap on `Wireless projection’
3. Select the TV you would like to cast to
If the mobile app is Cast-enabled, such as YouTube, Dailymotion, Net ix, you can cast your app to your TV. On the mobile app, look for the Google Cast icon and tap on it. Available devices will be detected and listed. Select your TV from the list and tap on it to start casting.
To cast an app to the TV screen…
1. On your smartphone or tablet, open an app that supports Google Cast
2. Tap the Google Cast icon
3. Select the TV you would like to cast to
4. The app you selected should start playing on TV
Notes:
Google Cast works on Android and iOS. Make sure that your mobile device is connected to the same network as your TV.
The menu options and namings for Google Cast function on RXU$QGURLGGHYLFHFDQGLHUIURPEUDQGWREUDQGDQGFDQ change with time. Refer to your device’s manual for latest informations on Google Cast function.
HBBTV System
HbbTV (Hybrid Broadcast Broadband TV) is a standard that seamlessly combines TV services delivered via broadcast with services delivered via broadband and also enables access to Internet only services for consumers using connected TVs and set-top boxes. Services delivered through HbbTV include traditional broadcast TV channels, catch-up services, video-on-demand, electronic programme guide, interactive advertising, personalisation, voting, games, social networking and other multimedia applications. HbbTV applications are available on channels where they are signalled by the broadcaster. The HbbTV applications are generally launched with the press of a coloured button on the remote. Generally a small red button icon will appear on the screen in order to notify the user that there is an HbbTV appli-

cation on that channel. Press the button indicated on the screen to launch the application. HbbTV applications use the buttons on the remote control to interact with the user. When an HbbTV application is launched, the control of some buttons are owned by the application. For example, numeric channel selection may not work on a teletext application where the numbers indicate teletext pages.
HbbTV requires AV streaming capability for the platform. There are numerous applications providing VOD (video on demand) and catch-up TV services. The OK (play&pause), Stop, Fast forward, and Rewind buttons on the remote control can be used to interact with the AV content.
Note: You can enable or disable this feature from the TV 2SWLRQV!$GYDQFHG 2SWLRQV!+%%79 6HWWLQJV menu in Live TV mode.
Quick Standby Search
If earlier an automatic search is performed, your TV will search for new or missing digital channels at 05:00 am every morning while in quick standby mode.
And if the Auto Channel Update option in the Settings>Channel menu is enabled the TV will wake up within 5 minutes after it is switched into quick standby mode and search for channels. Standby LED will blink during this process. Once the standby LED stops blinking the search process is completed. Any new found channels will be added to the channel list. If the channel list is updated, you will be informed on the changes at the next power on.
Software Update
Your TV is capable of finding and updating the firmware automatically via Internet.
To experience the best use of your TV and benefit from the latest improvements make sure your system is always up to date.
Software update via internet
On the Home Screen enter the Settings>Device Preferences>About menu in order to update your Android system version. Move the focus to the System update option and press OK. You will be informed about the system status and the time at which the device was last checked for an update will be displayed. The Check for update option will be highlighted, press OK if you want to check for an available update.
Note: Do not unplug the power cord during the reboot process. If the TV fails to come on after the upgrade, unplug, wait for two minutes then plug it back in.

English – 26 –

Troubleshooting & Tips
TV does not switch on
· Make sure the power cord is plugged in securely to power outlet.
· Disconnect the power cable from the power outlet. Wait for one minute then reconnect it.
· Press the Standby/On button on the TV.
TV does not respond to the remote control
· The TV requires some time to start up. During this time, the TV does not respond to the remote control or TV controls. This is normal behaviour.
· Check if the remote control is working by means of a mobile phone camera. Put the phone in camera mode and point the remote control to the camera lens. If you press any key on the remote control and you notice the infra red LED icker through the camera, the remote control is working. The TV needs to be checked.
If you do not notice the ickering, the batteries may be exhausted. Replace the batteries. If the remote is still not working, the remote control might be broken and needs to be checked.
This method of checking the remote control is not possible with remote controls which are wirelessly paired with the TV.
No Channels
· Make sure that all cables are properly connected and that the correct network is selected.
· Make sure that the correct channel list is selected.
· Make sure that you have entered the correct channel frequency if you have done manual tuning.
No picture / distorted picture
· Make sure that the antenna is properly connected to the TV.
· Make sure that the antenna cable is not damaged.
· Make sure that the correct device is selected as the input source.
· Make sure that the external device or source is properly connected.
· Make sure that the picture settings are set correctly.
· Loud speakers, unearthed audio devices, neon lights, high buildings and other large objects can in uence reception quality. If possible, try to improve the reception quality by changing the antenna direction or moving devices away from the TV.
· Change to a di erent picture format, if the picture does not fit the screen
· Make sure that your PC uses the supported resolution and refresh rate.

No sound / poor sound · Make sure that the sound settings are correctly set.
· Make sure that all cables are properly connected.
· Make sure that the volume is not muted or set to zero, increase the volume to check.
· Make sure that the TV audio output is connected to the audio input on the external sound system.
· Sound may be coming from only one speaker. Check the balance settings from Sound menu.
Input sources – can not be selected · Make sure that the device is connected to the TV.
· Make sure that all cables are properly connected.
· Make sure that you select the right input source which is dedicated to the connected device.
· Make sure that the right input source is not hidden from the Inputs menu.
HDMI Signal Compatibility

Source

Supported Signals

480i

60Hz

480p

60Hz

576i, 576p 50Hz

720p

50Hz,60Hz

1080i

50Hz,60Hz

HDMI

1080p

24Hz, 25Hz, 30Hz, 50Hz, 60Hz

3840x2160p

24Hz, 25Hz, 30Hz, 50Hz, 60Hz

4096x2160p

24Hz, 25Hz, 30Hz, 50Hz, 60Hz

In some cases a signal on the TV may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc. ). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.

English – 27 –

Supported File Formats for USB Mode
Video

Video Codec
MPEG 1/2
MPEG4 Sorenson H.263 H.263
H.264
HEVC/H.265 MVC AVS AVS+ WMV3
VC1
Motion JPEG VP8 VP9 RV30/RV40

Resolution

Bit Rate

1080P@ 60fps

80Mbps

1080P@60fps

40Mbps

1080P@60fps 1080P@60fps

40Mbps 40Mbps

4096×2176@60fps 1080P@60fps

135Mbps

4096×2176@60fps 100Mbps

1080P@30fps 1080P@60fps 1080P@60fps

80Mbps 40Mbps 50Mbps

1080P@60fps

40Mbps

1080P@60fps

40Mbps

1080P@30fps

10Mbps

1080P@60fps

20Mbps

4096×2176@60fps 100Mbps

1080P@60fps

40Mbps

Pro le

Container

MP@HL

MPEG program stream (.DAT, .VOB, .MPG, .MPEG), MPEG transport stream (.ts, .trp, .tp), MP4 (.mp4, .mov), 3GPP (.3gpp, .3gp), AVI (.avi), MKV (.mkv), ASF (.asf)

· Simple Profile
· Advanced Simple Profile@Level 5

MPEG program stream (.MPG, .MPEG), MP4 (.mp4, .mov), 3GPP (.3gpp, .3gp), AVI (.avi), MKV (.mkv), ASF (.asf)

· GMC is not supported

FLV (. v), AVI (.avi), SWF(.swf)

· Main Profile · High Profile @Level
5.1
Main/Main10 Profile, High Tier @Level 5.1

MP4 (.mp4, .mov), 3GPP (.3gpp, .3gp), AVI (.avi), MKV (.mkv)
FLV (. v), MP4 (.mp4, .mov), 3GPP (.3gpp, .3gp), MPEG transport stream (.ts, .trp, .tp), ASF (.asf), WMV (.wmv), AVI (.avi), MKV (.mkv)
MP4 (.mp4, .mov), 3GPP (.3gpp, .3gp), MPEG transport stream (.ts, .trp, .tp), MKV (.mkv)

MPEG transport stream (.ts, .trp, .tp)

Jizhun profile @ Level 6.0
Broadcasting profile@ Level 6.0.1.08.60

MPEG transport stream (.ts, .trp, .tp) MPEG transport stream (.ts, .trp, .tp)

ASF (.asf), AVI (.avi), MKV (.mkv), WMV (.wmv)

· Advanced Profile @ Level 3
· Simple Profile · Main Profile

MPEG program stream (.MPG, .MPEG), MPEG transport stream (.ts, .trp, .tp), ASF (.asf), WMV (.wmv), AVI (.avi), MKV (.mkv)
AVI (.avi), 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov), MKV (.mkv), ASF (.asf)

MKV (.mkv), WebM (.webm)

Profile0/2

MKV (.mkv), WebM (.webm)

RM (.rm, .rmvb)

Audio

Audio Codec

Sample rate Channel Bit Rate

Container

MPEG1/2 Layer1 16KHz ~ 48KHz Up to 2

32Kbps ~ 448Kbps

Movie: AVI (.avi), ASF (.asf), Matroska (.mkv), MPEG transport stream (.ts, .trp, .tp), MPEG program stream (.DAT, .VOB, .MPG, .MPEG) Music: MP3 (.mp3), WAV (.wav)

English – 28 –

Note

Audio Codec

Sample rate Channel Bit Rate

Container

Note

MPEG1/2 Layer2 16KHz ~ 48KHz Up to 2

8Kbps ~ 384Kbps

Movie: AVI (.avi), ASF (.asf), Matroska (.mkv), MPEG transport stream (.ts, .trp, .tp), MPEG program stream (.DAT, .VOB, .MPG, .MPEG) Music: MP3 (.mp3), WAV (.wav)

MPEG1/2 Layer3 16KHz ~ 48KHz Up to 2

8Kbps ~ 320Kbps

AC3 EAC3

32KHz, 44.1KHz, 48KHz

Up to 5.1

32Kbps ~ 640 Kbps

32KHz, 44.1KHz, 48KHz

Up to 5.1

32Kbps ~ 6 Mbps

AAC-LC, HEAAC 8KHz ~ 48KHz Up to 5.1

WMA

8KHz ~ 48KHz

Up to 2

128bps ~ 320Kbps

WMA 10 Pro M0 48KHz

Up to 2 < 192kbps

WMA 10 Pro M1 48KHz

Up to 5.1 < 384kbps

WMA 10 Pro M2 96KHz

Up to 5.1 < 768kbps

VORBIS

Up to 48KHz

Up to 2

DTS

Up to 48KHz

Up to 5.1 < 1.5Mbps

Movie: AVI (.avi), ASF (.asf), Matroska (.mkv), 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov), MPEG transport stream (.ts, .trp, .tp), MPEG program stream (.DAT, .VOB, .MPG, .MPEG), FLV (. v), SWF (.swf) Music: MP3 (.mp3), WAV (.wav), MP4 (.m4a)

Movie: AVI (.avi), Matroska (.mkv), 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov), MPEG transport stream (.ts, .trp, .tp), MPEG program stream (.DAT, .VOB, .MPG, .MPEG) Music: AC3 (.ac3), MP4 (.m4a)

Movie: 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov), MPEG transport stream (.ts, .trp, .tp), MPEG program stream (.DAT, .VOB, .MPG, .MPEG) Music: EAC3 (.ec3), MP4 (.m4a)

Movie: AVI (.avi), Matroska (.mkv), 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov), MPEG transport stream (.ts, .trp, .tp), MPEG program stream (.DAT, .VOB, .MPG, .MPEG), FLV (. v), RM (.rm, .rmvb) Music: AAC (.aac), MP4 (.m4a)

Movie: ASF (.wmv, .asf), AVI (.avi), Matroska (.mkv)
Music: ASF (.wma)

WMA 7, WMA 8, WMA 9, Standard

Movie: ASF (.wmv, .asf), AVI (.avi), Matroska (.mkv)
Music: ASF (.wma)

No LBR mode

Movie: ASF (.wmv, .asf), AVI (.avi), Matroska (.mkv)
Music: ASF (.wma)

Movie: Matroska (.mkv), WebM (.webm), 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov) Music: MP4 (.m4a), OGG (.ogg)

Supports stereo decoding only

Movie: MPEG transport stream (.ts, .trp, .tp), MPEG program stream (.DAT, .VOB, .MPG, .MPEG), MP4 (.mp4, .mov), Matroska (.mkv)

English – 29 –

Audio Codec

Sample rate Channel Bit Rate

Container

LPCM
IMA-ADPCM MS-ADPCM
G711 A/mu-law
LBR (cook) FLAC DTS LBR DTS XLL DRA

8KHz ~ 48KHz

Up to 5.1

64Kbps ~ 1.5Mbps

Movie: AVI (.avi), Matroska (.mkv), 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov), MPEG transport stream (.ts, .trp, .tp), MPEG program stream, (.DAT, .VOB, .MPG, .MPEG) Music: WAV (.wav), MP4 (.m4a)

8KHz ~ 48KHz Up to 2 384Kbps

8KHz
8KHz 11.025KHz, 22.05KHz, 44.1KHz

Up to 2

64Kbps ~ 128Kbps

Up to 5.1

6Kbps ~ 128Kbps

Movie: AVI (.avi), Matroska (.mkv), 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov) Music: WAV (.wav), MP4 (.m4a)
Movie: AVI (.avi), Matroska (.mkv), 3GPP (.3gpp, .3gp), MP4 (.mp4, .mov) Music: WAV (.wav), MP4 (.m4a)
Movie: RM (.rm, .rmvb)

8KHz~96KHz

Up to 5.1 < 1.6Mbps

Movie: Matroska (.mkv, .mka) Music: FLAC(. ac)

12KHz, 22KHz,
24KHz, 44.1KHz, Up to 5.1 up to 2Mbps Movie: MP4 (.mp4, .mov) 48KHz

Up to 96KHz

Up to 6

Movie: MPEG transport stream (.ts, .trp, .tp), MP4 (.mp4, .mov)

8KHZ~96KHz

Up to 7.1

< 1533Kbps

Movie: MPEG transport stream (.ts, .trp)

Picture
Image
JPEG PNG BMP MPO GIF

Photo
Base-line Progressive non-interlace interlace
Base-line Progressive

Resolution (width x height)
15360×8640 (1920×8 x 1080×8) 1024×768 9600×6400 1200×800 9600×6400 15360×8640 (1920×8 x 1080×8) 1024×768 6400×4800 (800×8 x 600×8)

Note

English – 30 –

Subtitle
Internal

File Extension dat, mpg, mpeg, vob ts, trp, tp mp4

Container MPG, MPEG TS MP4

mkv
avi External

MKV
AVI(1.0, 2.0), DMF0, 1, 2

DVD Subtitle
DVB Subtitle
DVD Subtitle UTF-8 Plain Text ASS SSA UTF-8 Plain Text VobSub DVD Subtitle
XSUB XSUB+

Subtitle Codec

File Extension

Subtitle Parser

Remark

.srt

SubRip

.ssa/ .ass .smi
.sub
.txt

SubStation Alpha
SAMI
SubViewer MicroDVD DVDSubtitleSystem SubIdx (VobSub)
TMPlayer

SubViewer 1.0 & 2.0 Only

Supported DVI Resolutions

When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable – not supplied), you can refer to the following resolution information.

56Hz

60Hz

66Hz

70Hz

72Hz

75Hz

640×480

800×600

1024×768

1280×768

1280×960

1360×768

1366×768

1280×1024

1400×1050

1600×900

Speci cation

TV Broadcasting

PAL BG/I/DK SECAM BG/DK

Receiving Channels

VHF (BAND I/III) – UHF (BAND U) – HYPERBAND

Digital Reception

Fully ntegrated d g tal terrestr al-cable-satell te TV(DVB-T-C-S) (DVB-T2, DVB-S2 compl ant)

Number of Preset Channels

12 200

Channel Indicator

On Screen Display

RF Aerial Input

75 Ohm (unbalanced)

Operating Voltage

220-240V AC, 50Hz.

Audio

DTS HD

Audio Output Power (WRMS.) (10% THD)

2 x 10

Power Consumption (W) 135W

Networked Standby Power Consumption (W)

< 2

TV Dimensions DxLxH (with foot) (mm)

244 x 1119 x 715

TV Dimensions DxLxH (without foot) (mm)

32/66 x 1119 x 647

D splay

50″

Operation temperature 0ºC up to 40ºC, 85% and operation humidity humidity max

Wireless LAN Transmitter Speci cations

Frequency Ranges
2400 – 2483,5 MHz (CH1-CH13) 5150 – 5250 MHz (CH36 – CH48) 5250 – 5350 MHz (CH52 – CH64) 5470 – 5725 MHz (CH100 – CH140)

Max Output Power < 100 mW < 200 mW < 200 mW < 200 mW

Country Restrictions
This device is intended for home and o ce use in all EU countries (and other countries following the relevant EU directive) without any limitation except for the countries mentioned below.

Country

Restriction

Bulgaria Italy Greece Luxembourg
Norway Russian Federation

General authorization required for outdoor use and public service
If used outside of own premises, general authorization is required
In-door use only for 5470 MHz to 5725 MHz band
General authorization required for network and service supply(not for spectrum)
Radio transmission is prohibited for the geographical area within a radius of 20 km from the centre of Ny-Ålesund
In-door use only

Israel

5 GHz band only for 5180 MHz-5320 MHz range

The requirements for any country may change at any time. It’s recommended that user checks with local authorities for the current status of their national regulations for 5 GHz wireless LAN’s.

English – 31 –

English – 32 –

Licences
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 1992-2021 Dolby Laboratories. All rights reserved.
Google, Android, Android TV, Chromecast, Google Play and YouTube are trademarks of Google LLC.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS and the Symbol together, DTS-HD, and the DTS-HD logo are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.
Content owners use Microsoft PlayReadyTM content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM- protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not a ect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to access their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.
The “CI Plus” Logo is a trademark of CI Plus LLP.
This product is protected by certain intellectual property rights of Microsoft Corporation. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary.

Disposal Information

[European Union] These symbols indicate that the electrical and electronic equipment and the battery with this symbol should not be disposed of as general household waste at its end-of-life. Instead, the products should be handed over to the applicable collection points for the recycling of electrical and electronic equipment as well as batteries for proper treatment, recovery and recycling in accordance with your national legislation and the Directive 2012/19/EU and 2013/56/EU.
By disposing of these products correctly, you will help to conserve natural resources and will help to prevent potential negative e ects on the environment and human health which could otherwise be caused by inappropriate waste handling of these products.
For more information about collection points and recycling of these products, please contact your local municipal o ce, your household waste disposal service or the shop where you purchased the product.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
[Business users] If you wish to dispose of this product, please contact your supplier and check the terms and conditions of the purchase contract.
[Other Countries outside the European Union] These symbols are only valid in the European Union.
Contact your local authority to learn about disposal and recycling.
The product and packaging should be taken to your local collection point for recycling.
Some collection points accept products free of charge.
Note: The sign Pb below the symbol for batteries indicates that this battery contains lead.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>

50DM55UQP Colour Television with Remote Control

Safety Information

Markings on the Product

Introduction

Accessories Included

Features

Stand Installation & Wall Mounting

Supported DVI Resolutions

Specification

Licences

Disposal Information

Antenna Connection

Other Connections

Turning On/Off the TV

TV Control & Operation

Remote Control

Initial Setup Wizard

Home Screen

Live TV Mode Menu Content

Channels

TV Options

Record

Settings

Watching Recorded Programmes

Timeshift Recording

Disk Format

Schedule List

Product Usage Instructions: TV

Safety Information

Important maintenance component

WALL MOUNTING WARNINGS

TV Control & Operation

Remote Control

Initial Setup Wizard

Menu Options

Disposal Information

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Daewoo User Manuals

Related Manuals