AMINAC G40 LED Bulbs String Lights User Manual

AMINAC G40 LED Bulbs String Lights

Product Function Description

• The Solar G40 LED Bulbs String Lights set contains a high-efficiency solar panel that absorbs solar energy during the day, converts it to electricity, stores it in the built-in Lithium battery, and supplies power to lights at night. The light control technology makes it charged by solar power during the day and light up at night automatically.
• Turn ON the string lights, it will light up at night when the surroundings are dark, so please do not install the solar panel near other light sources, or it will impact its lighting up. And the string lights will light OFF automatically at dawn. If any individual bulb doesn’t light up, please rotate the bulb a bit to make it light up.
  For detailed specs of the product you purchase, please refer to below specs table and light length information:

Use Instruction

1. Please use USB cable to charge the solar panel if the sunlight is insufficient to supply power to string lights or in cold seasons. Red indicator light on when charging and Green light on when fully charged.
2. If the string lights set includes a remote control, please see below:

Product Protecting Function

1. Charging Protect: battery voltage will keep at 4.2-4.25V after charge, and charging will be stopped once voltage is higher, so as to protect charging circuit and battery.
2. Discharge Protect: after output and lights stop working, the battery voltage will be 2.8-3.0V, lights can’t work at this condition till battery being recharged and voltage is higher than 3.3v.
3. Over-current Protect: the output will be stopped immediately once output current is higher than standard.
4. Short Circuit Protect: the whole power system will be OFF once short circuit occurs, it needs charging and activating again for use.

Special Notes

1. The conversion efficiency of the solar panel will be impacted by sunlight, so the working time of lights will differ due to weather, season, and geographical position, it is normal.
2. The solar panel can only be charged and make string lights light up at ON stage.
3. The water-resistant feature is designed for rainfall and natural moisture, do not immerse it into water for a long time.
4. Do not hit or drop it hard, in case of any damage.
5. The bottom end of spike is very sharp, DO NOT leave it to children.
   Enjoy using your Solar G40 LED Bulbs String Lights!

Product Function Description

• The string lights set contains high efficiency solar panel that absorbs solar energy at daytime, converts it to electricity, stores it in the built-in Lithium battery, and supply power to lights at night. The light control technology makes it charged by solar power at day time and light up at night automatically.
• Turn ON the string lights, it will light up at night when the surroundings are dark, so please do not install the solar panel near other light sources, or it will impact its lighting up. And the string lights will light OFF automatically at dawn.
• If any individual bulb doesn’t light up, please rotate the bulb a bit to make it light up.

SPECIFICATION

For detailed specs of the product you purchase, please refer to below specs table and light length information:

LED QUANTITY AND CABLE LENGTH

Use Instruction

1. Connecting the solar panel control box with ground spike and holder;
2. Fixing the string lights at proper place, make sure the solar panel not sheltered, or it will impact the charging of solar power;
3. Remove the plastic film (if there is) on solar panel and press ON/OFF switch to start the intelligent mode: automatically charge at daytime and lighting up at night; press MODE can shift lighting mode;
4. Lighting Mode: press MODE once shift to next mode; 4 modes in total：steady ON，slow flash，quick flash and pulsating flash;
5. Please use USB cable to charge the solar panel if the sunlight is insufficient to supply power to string lights or in cold seasons. Red indicator light on when charging and Green light on when fully charged.

REMOTE CONTROL INSTRUCTION

If the string lights set includes a remote control, please see below:

Product Protecting Function

1. Charging Protect: battery voltage will keep at 4.2-4.25V after charge, and charging will be stopped once voltage is higher, so as to protect charging circuit and battery.
2. Discharge Protect: after output and lights stop working, the batteryvoltagewillbe2.8-3.0V, lights can’t work at this condition till battery being recharged and voltage is higher than 3.3v.
3. Over-current Protect: the output will be stopped immediately once output current is higher than standard.
4. Short Circuit Protect: the whole power system will be OFF once short circuit occurs, it needs charging and activating again for use.

Special Notes

1. The conversion efficiency of solar panel will be impacted by sunlight, so the working time of lights will differ due to weather, season and geographical position, it is normal.
2. The solar panel can only be charged and make string lights light up at ON stage.
3. The water resistant feature is designed for rainfall and natural moisture, do not immerse it into water for along time.
4. Do not hit or drop it hard, in case any damage.
5. The bottom end of spike is very sharp, DO NOT leave it to children.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>